evarty/KiCADPCBThis is the PCB design for various projects. Some have associated uC code, but that is seperate. There are seperate repos for some projects under evarty. A number of these have GCode as well.
BoostConvertTE is an open-source printed circuit board by evarty, from the evarty/KiCADPCB repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 58.4 × 53.3 mm with 21 parts on 11 nets, routed with 89 tracks and 2 vias.
It is built around the LM555N and BC547. Its parts include 4 capacitors, 4 resistors, 4 connectors, 2 transistors and 1 IC.
This is the PCB design for various projects. Some have associated uC code, but that is seperate. There are seperate repos for some projects under evarty. A number of these have GCode as well.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | CONN_01X01 | Pin_Headers:Pin_Header_Straight_1x01 | P1, P2, P2, P3 |
| 1 | 100p | Capacitors_ThroughHole:C_Rect_L7_W2.5_P5 | C3 |
| 1 | 10K | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | R2 |
| 1 | 1K | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | R1 |
| 1 | 1k | TO_SOT_Packages_THT:TO-220_Neutral123_Horizontal | RV1 |
| 1 | 220k | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | R4 |
| 1 | 2k2 | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | R3 |
| 1 | 2n2 | Capacitors_ThroughHole:C_Rect_L7_W2.5_P5 | C1 |
| 1 | BC547 | TO_SOT_Packages_THT:TO-92_Inline_Wide | Q1 |
| 1 | CP2 | Capacitors_ThroughHole:C_Rect_L27_W9_H17_P23 | C4 |
| 1 | CP2 | Capacitors_ThroughHole:C_Radial_D10_L13_P5 | C2 |
| 1 | DIODESCH | Discret:D3 | D1 |
| 1 | INDUCTOR | Capacitors_ThroughHole:C_Radial_D10_L13_P5 | L1 |
| 1 | LM555N | Housings_DIP:DIP-8_W7.62mm_LongPads | U1 |
| 1 | Q_NMOS_GDS | TO_SOT_Packages_THT:TO-220_Neutral123_Vertical | Q2 |
The 18 most common of 21 parts.
It measures 58.4 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
21 parts, built around the LM555N and BC547. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the evarty/KiCADPCB repository on GitHub, at the commit this page was made from: the board is BoostConvertTE/BoostConvertTE.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
evarty/KiCADPCB
This is the PCB design for various projects. Some have associated uC code, but that is seperate. There are seperate repos for some projects under evarty. A number of these have GCode as well.
evarty/KiCADPCB
This is the PCB design for various projects. Some have associated uC code, but that is seperate. There are seperate repos for some projects under evarty. A number of these have GCode as well.
evarty/KiCADPCB
This is the PCB design for various projects. Some have associated uC code, but that is seperate. There are seperate repos for some projects under evarty. A number of these have GCode as well.
evarty/KiCADPCB
This is the PCB design for various projects. Some have associated uC code, but that is seperate. There are seperate repos for some projects under evarty. A number of these have GCode as well.
evarty/KiCADPCB
This is the PCB design for various projects. Some have associated uC code, but that is seperate. There are seperate repos for some projects under evarty. A number of these have GCode as well.
evarty/KiCADPCB
This is the PCB design for various projects. Some have associated uC code, but that is seperate. There are seperate repos for some projects under evarty. A number of these have GCode as well.
evarty/KiCADPCB
This is the PCB design for various projects. Some have associated uC code, but that is seperate. There are seperate repos for some projects under evarty. A number of these have GCode as well.
evarty/KiCADPCB
This is the PCB design for various projects. Some have associated uC code, but that is seperate. There are seperate repos for some projects under evarty. A number of these have GCode as well.
evarty/KiCADPCB
This is the PCB design for various projects. Some have associated uC code, but that is seperate. There are seperate repos for some projects under evarty. A number of these have GCode as well.
evarty/KiCADPCB
This is the PCB design for various projects. Some have associated uC code, but that is seperate. There are seperate repos for some projects under evarty. A number of these have GCode as well.
evarty/KiCADPCB
This is the PCB design for various projects. Some have associated uC code, but that is seperate. There are seperate repos for some projects under evarty. A number of these have GCode as well.
evarty/KiCADPCB
This is the PCB design for various projects. Some have associated uC code, but that is seperate. There are seperate repos for some projects under evarty. A number of these have GCode as well.
valerionew/Banana-Random-Number-Generator
Random number generator based on radioactivity from bananas
acolomitchi/cap-soil-moisture-v2
Files for the capacitive soil moisture (2 kicad projects and 1 arduino sketch with dependencies)
matiasmicheletto/openscad-oil-pumpjack
3d models and electronics for a variable speed scale pumpjack
RichCini/VIC-20-Reloaded
Reimaging of the original VIC-20cr ("cost-reduced") main board in a smaller footprint.
