evarty/KiCADPCBThis is the PCB design for various projects. Some have associated uC code, but that is seperate. There are seperate repos for some projects under evarty. A number of these have GCode as well.
NRFTest is an open-source printed circuit board by evarty, from the evarty/KiCADPCB repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 63.5 × 61 mm with 24 parts on 34 nets, routed with 149 tracks and 0 vias.
It is built around the ATMEGA328P-PU. Its parts include 8 resistors, 8 diodes, 4 capacitors, 3 ICs and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.
This is the PCB design for various projects. Some have associated uC code, but that is seperate. There are seperate repos for some projects under evarty. A number of these have GCode as well.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 1k | Resistors_ThroughHole:Resistor_Horizontal_RM15mm | R1, R2, R3, R4, R5, R6, R7, R8 |
| 8 | LED | LEDs:LED-5MM | D1, D2, D3, D4, D5, D6, D7, D8 |
| 3 | .1u | Capacitors_ThroughHole:C_Rect_L7_W2.5_P5 | C2, C3, C4 |
| 1 | .47u | Capacitors_ThroughHole:C_Rect_L7_W2.5_P5 | C1 |
| 1 | ATMEGA328P-P | Housings_DIP:DIP-28_W7.62mm_LongPads | IC1 |
| 1 | BARREL_JACK | Connect:BARREL_JACK | CON1 |
| 1 | LD33V3 | TO_SOT_Packages_THT:TO-220_Neutral123_Vertical | U1 |
| 1 | NRF24L01+_module | Pin_Headers:Pin_Header_Straight_2x04 | U2 |
evarty/KiCADPCB
This is the PCB design for various projects. Some have associated uC code, but that is seperate. There are seperate repos for some projects under evarty. A number of these have GCode as well.
evarty/KiCADPCB
This is the PCB design for various projects. Some have associated uC code, but that is seperate. There are seperate repos for some projects under evarty. A number of these have GCode as well.
evarty/KiCADPCB
This is the PCB design for various projects. Some have associated uC code, but that is seperate. There are seperate repos for some projects under evarty. A number of these have GCode as well.
evarty/KiCADPCB
This is the PCB design for various projects. Some have associated uC code, but that is seperate. There are seperate repos for some projects under evarty. A number of these have GCode as well.
evarty/KiCADPCB
This is the PCB design for various projects. Some have associated uC code, but that is seperate. There are seperate repos for some projects under evarty. A number of these have GCode as well.
evarty/KiCADPCB
This is the PCB design for various projects. Some have associated uC code, but that is seperate. There are seperate repos for some projects under evarty. A number of these have GCode as well.
evarty/KiCADPCB
This is the PCB design for various projects. Some have associated uC code, but that is seperate. There are seperate repos for some projects under evarty. A number of these have GCode as well.
evarty/KiCADPCB
This is the PCB design for various projects. Some have associated uC code, but that is seperate. There are seperate repos for some projects under evarty. A number of these have GCode as well.
evarty/KiCADPCB
This is the PCB design for various projects. Some have associated uC code, but that is seperate. There are seperate repos for some projects under evarty. A number of these have GCode as well.
evarty/KiCADPCB
This is the PCB design for various projects. Some have associated uC code, but that is seperate. There are seperate repos for some projects under evarty. A number of these have GCode as well.
evarty/KiCADPCB
This is the PCB design for various projects. Some have associated uC code, but that is seperate. There are seperate repos for some projects under evarty. A number of these have GCode as well.
evarty/KiCADPCB
This is the PCB design for various projects. Some have associated uC code, but that is seperate. There are seperate repos for some projects under evarty. A number of these have GCode as well.
zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube
coseyfannitutti/discipad
17-key numpad assembled with only through hole components, including usb type-c
matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer
coseyfannitutti/romeo
Staggered 40% keyboard pcb that can be assembled with only through hole components, including USB Type-C
mattybrad/drumkid
Version 4 was the first successful working design, with full code, schematics, Gerbers, etc available on GitHub.
leomil72/LM80C
A Z80-based homebrew computer withTMS9918, AY-3-8910, Z80 CTC, Z80 PIO, and Z80 SIO
It measures 63.5 × 61 mm and has 2 copper layers, 1.6 mm thick.
24 parts, built around the ATMEGA328P-PU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the evarty/KiCADPCB repository on GitHub, at the commit this page was made from: the board is NRFTest/NRFTest.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
