

93c76 revision two
- Size
- 229.9 × 86.4 mm
- Copper layers
- 2
- Thickness
- 2.09 mm
- Parts
- 168
- Nets
- 517
- Pads
- 1,683
- Tracks, vias
- 1,266, 104
- Pours
- 102
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 18 Aug 2024
- Updated
- 8 Nov 2025
Overview
93c76 revision two is an open-source printed circuit board by ethanjamesauto, from the ethanjamesauto/modular_8bit_computer repository on GitHub. It is a 2-layer board of 229.9 × 86.4 mm with 168 parts on 517 nets, routed with 1,266 tracks and 104 vias.
It is built around the 74LS245SC, 74LS123FP-E and 74LS175PC, with the 74LS273PC, 74HC595 and 74LS00SC among its other parts. Its parts include 37 resistors, 28 connectors, 22 diodes, 19 ICs and 15 capacitors.
Main components
1274LS245SC
-0℃~+70℃ 12ns@5V,45pF 15mA 24mA 4.75V~5.25V 74LS 8 Bidirectional Output enable Schmitt trigger Tri-State - Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, Transceivers74LS123FP-E
-Reset input、Adjustable pulse width、Retriggerable function - Monostable Multivibrators ROHSRenesas ElectronicsMonostable Multivibrators74LS175PC
PDIP-160℃~+70℃ 1 10ns 18mA 25ns@5V,15pF 30MHz 4 4.75V~5.25V 5ns 74LS Series Asynchronous Complementary type D-Type Reset Rising Edge PDIP-16 Flip Flops ROHSTexas InstrumentsFlip Flops74LS273PC
PDIP-201 15ns 27mA 27ns@5V,15pF 30MHz 5ns 74LS Series 8 D-Type Reset Rising Edge PDIP-20 Flip Flops ROHSonsemiFlip Flops74HC595
SOP-16-40℃~+85℃ 1 100ns@5V,50pF 10MHz 2V~6V 74HC 8 Serial-to-Serial or Parallel Tri-State SOP-16 Shift Registers ROHSGRShift Registers74LS00SC
-0℃~+70℃ 15ns@5V,50pF 2 2.7V 2V 4 4.75V~5.25V 400uA 500mV 74LS 800mV 8mA NAND Gate - Logic Gates ROHSTexas InstrumentsLogic Gates74LS02PC
DIP-140℃~+70℃ 15ns@5V,15pF 2 2.7V 2V 4 4.75V~5.25V 400uA 500mV 74LS 800mV 8mA 8mA NOR Gate DIP-14 Logic Gates ROHSonsemiLogic Gates74LS14PC
PDIP-14InvertersTexas Instruments74LS153DC
PDIP-160℃~+70℃ 14ns 4.75V~5.25V 400uA 400uA 6.2mA 74LS Single Supply Tri-state output PDIP-16 Signal Switches, Multiplexers, Decoders ROHSTexas InstrumentsSignal Switches, Multiplexers, Decoders74LS393P-E
DIP-14-20℃~+75℃ 2 35MHz 4 4.75V~5.25V 400mW 40ns@5V,15pF 74LS Binary Counter Reset function DIP-14 Counters, Dividers ROHSRenesas ElectronicsCounters, Dividers74LS85DC
CDIP-16-55℃~+125℃ 10mA 24ns Four channels TTL CDIP-16 Comparators ROHSTexas InstrumentsComparatorsNA555D
SOIC-8-40℃~+105℃ 1 200mA 2mA 4.5V~16V Adjustable duty cycle oscillation、Reset function SOIC-8 555 Timers / Counters ROHSTexas InstrumentsTimers / Counters
README
README.mdModular 8-bit Computer
This is the repository for an 8-bit computer system that is built using cards with a standardized interface.
- CPU card
- Protoboard card
- This card contains an onboard clock generator, address and data registers/buffers, and a protoboard area for testing designs.
- Bus interface modeling
Here's an example of a card:

Current Bus Specification
// The main bus wires (32+8=40 wires total)
// On the bus connector, all buses have LSBs closer to the power pins and MSBs farther away
wire VCC_5V;
wire GND;
wire clk; // generated by motherboard clock generator
wire rst_n; // probably a button on the motherboard
wire VCC_3V3;
wire we_n; // active LOW
wire oe_n; // active LOW
wire int_n; // pulled up by motherboard; driven down by any peripheral (could be used for interrupts)
wire [7:0] data;
wire [15:0] addr; // 64k address space is suppored by default. More address bits may be added later
wire [7:0] aux_bus;Parts
168| Qty | Value | Footprint | References |
|---|---|---|---|
| 42 | Conn_01x25_Pin | Connector_PinHeader_2.54mm:PinHeader_1x25_P2.54mm_Vertical | JCol1, JCol2, JCol3, JCol3, JCol3, JCol3, JCol3, JCol4, JCol4, JCol4, JCol4, JCol10, JCol10, JCol10, JCol10, JCol10 +26 |
| 26 | 470 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | r1, r11, r12, r13, r14, r18, r19, r20, r21, r22, r23, r24, r25, r26, r27, r28 +10 |
| 21 | VCC | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2, D3, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22 +5 |
| 15 | C | Capacitor_THT:C_Disc_D3.0mm_W2.0mm_P2.50mm | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15 |
| 10 | set_addr_14 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J7, J8, J21, J22, J23, J24, J25, J26, J27, J28 |
| 8 | 470 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | r2, r3, r4, r5, r9, r10, r16, r17 |
| 2 | 1 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | r6, r7 |
| 2 | 74LS123 | Package_DIP:DIP-16_W7.62mm | U2, U3 |
| 2 | 74LS175 | Package_DIP:DIP-16_W7.62mm | U13, U17 |
| 2 | 74LS245 | Package_DIP:DIP-20_W7.62mm | U16, U22 |
| 2 | 74LS273 | Package_DIP:DIP-20_W7.62mm | U5, U20 |
| 2 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J14, J29 |
| 2 | Conn_01x15_Pin | Connector_PinHeader_2.54mm:PinHeader_1x15_P2.54mm_Vertical | J16, J17 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | r15 |
| 1 | 74HC595 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U9 |
| 1 | 74LS00 | Package_DIP:DIP-14_W7.62mm | U11 |
| 1 | 74LS02 | Package_DIP:DIP-14_W7.62mm | U12 |
| 1 | 74LS138 | Package_DIP:DIP-16_W7.62mm | U18 |
| 1 | 74LS14 | Package_DIP:DIP-14_W7.62mm | U19 |
| 1 | 74LS153 | Package_DIP:DIP-16_W7.62mm | U21 |
| 1 | 74LS393 | Package_DIP:DIP-14_W7.62mm | U14 |
| 1 | 74LS85 | Package_DIP:DIP-16_W7.62mm | U15 |
| 1 | 93CxxA | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | 93CxxA_FOOTPRINT | Package_DIP:DIP-8_W7.62mm | PROG_INTER1 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | Conn_01x40_Pin | Connector_PinHeader_2.54mm:PinHeader_1x40_P2.54mm_Horizontal | J1 |
| 1 | DB9_Female_MountingHoles | Connector_Dsub:DSUB-9_Female_Horizontal_P2.77x2.84mm_EdgePinOffset4.94mm_Housed_MountingHolesOffset7.48mm | J15 |
| 1 | EXE | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J6 |
| 1 | KCSA02-136 | Display_7Segment:7SegmentLED_LTS6760_LTS6780 | U23 |
| 1 | LED_RGAB | LED_THT:LED_D5.0mm-4_RGB | D6 |
| 1 | LOGO | AudioJacks:faryu | G*** |
| 1 | NA555D | Package_DIP:DIP-8_W7.62mm | U4 |
| 1 | PROG | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J4 |
| 1 | SEL | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J5 |
| 1 | addr | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J18 |
| 1 | card_oe_addr | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J13 |
| 1 | card_we_addr | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J12 |
| 1 | data | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J20 |
| 1 | sel_addr_data | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J19 |
| 1 | set_addr_15 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J9 |
| 1 | set_card_oe_addr | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J11 |
| 1 | set_card_we_addr | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J10 |
| 1 | sim_OE_n | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | SW3 |
| 1 | sim_RESET_n | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | SW1 |
| 1 | sim_WE_n | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | SW2 |
More from ethanjamesauto/modular_8bit_computer
12- 2 layers229.9 × 93.3 mm

- 2 layers229.9 × 83.8 mm

- 2 layers229.9 × 93.3 mm

- 2 layers229.9 × 83.8 mm

- 2 layers222.3 × 127 mm

- 2 layers86.4 × 53.8 mm

- 2 layers2.8 × 6.6 mm

- 2 layers111.8 × 77.2 mm

- 2 layers48.3 × 48.3 mm

- 2 layers119.4 × 45.7 mm

- 2 layers104.1 × 50.8 mm

- 2 layers132.1 × 83.8 mm

Similar boards
- 2 layers630 × 300 mm

- 4 layers254 × 137.7 mm

S100 ColorMagic-1.1-006
RichCini/LomasBoards
Small repository of files/data related to Lomas Data Products S-100 boards.
150 parts1 - 2 layers486 × 306.3 mm

- 2 layers450 × 160 mm

- 2 layers279.4 × 203.2 mm

Z180GDC
lynchaj/rhyophyre
Single Board Computer featuring Zilog Z180 processor and NEC µPD7220 Graphics Display Controller
249 parts12 - 4 layers337.6 × 105.7 mm

ISA CGA
hkzlab/CGA_Redux
The Color Graphics Adapter Redux board is a more or less faithful clone of the original IBM CGA, based on the original schematics
170 parts56 - 2 layers236.8 × 169.8 mm

TK2000
clemarfolly/Microdigital-TK2000
Reprodução da PCB do TK-2000 da Microdigital, clone do Micro-Professor MPF-II
212 parts17 - 2 layers190.6 × 172.4 mm

Questions
How big is the 93c76 revision two PCB?
It measures 229.9 × 86.4 mm and has 2 copper layers, 2.09 mm thick.
What parts does the 93c76 revision two use?
168 parts, built around the 74LS245SC, 74LS123FP-E, 74LS175PC and 74LS273PC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 93c76 revision two KiCad files?
From the ethanjamesauto/modular_8bit_computer repository on GitHub, at the commit this page was made from: the board is 93c46a_type/93c76_revision_two/93c76_revision_two/93c76_revision_two.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the 93c76 revision two design in my own project?
Its repository states no licence, so its author keeps all rights: ask ethanjamesauto before reusing the design.