Skip to the content
2 layers71.1 × 25.4 mm8 bit logic analyzer rev 2, the printed circuit board in 3D

8 bit logic analyzer rev 2

ethanjamesauto/modular_8bit_computer2
Size
71.1 × 25.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
29
Nets
46
Pads
128
Tracks, vias
253, 26
Pours
2
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
18 Aug 2024
Updated
8 Nov 2025

Overview

8 bit logic analyzer rev 2 is an open-source printed circuit board by ethanjamesauto, from the ethanjamesauto/modular_8bit_computer repository on GitHub. It is a 2-layer board of 71.1 × 25.4 mm with 29 parts on 46 nets, routed with 253 tracks and 26 vias.

It is built around the 74LS195APC. Its parts include 9 resistors, 9 diodes, 5 connectors, 4 ICs and 2 capacitors. It belongs with the sensors and measurement and retro computing and games boards of this library.

Main components

1

README

README.md

Modular 8-bit Computer

This is the repository for an 8-bit computer system that is built using cards with a standardized interface.

Here's an example of a card:

Current Bus Specification

verilog
// The main bus wires (32+8=40 wires total)
// On the bus connector, all buses have LSBs closer to the power pins and MSBs farther away
wire VCC_5V;
wire GND;
wire clk;			      // generated by motherboard clock generator
wire rst_n;			    // probably a button on the motherboard
wire VCC_3V3;
wire we_n;			      // active LOW
wire oe_n;			      // active LOW
wire int_n;			    // pulled up by motherboard; driven down by any peripheral (could be used for interrupts)
wire [7:0] data;
wire [15:0] addr;	  // 64k address space is suppored by default. More address bits may be added later
wire [7:0] aux_bus;

Parts

29
QtyValueFootprintReferences
9470Resistor_SMD:R_0603_1608MetricR1, R2, R3, R4, R7, R8, R9, R10, R11
9LEDResistor_SMD:R_0603_1608MetricD1, D2, D3, D4, D5, D6, D7, D8, D9
3Conn_01x02_PinConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ3, J4, J5
274LS195Package_DIP:DIP-16_W7.62mmU2, U4
2~Package_DIP:DIP-16_W7.62mmU1, U3
1100nFCapacitor_THT:C_Disc_D3.0mm_W2.0mm_P2.50mmC1
11uFCapacitor_THT:C_Disc_D3.0mm_W2.0mm_P2.50mmC2
1Conn_01x08_PinConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ1
1Conn_01x10_PinConnector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_VerticalJ2

More from ethanjamesauto/modular_8bit_computer

12
  • 2 layers229.9 × 83.8 mmSmaller card, the printed circuit board in 3D

    Smaller card

    ethanjamesauto/modular_8bit_computer

    246 parts2
  • 2 layers222.3 × 127 mmMotherboard, the printed circuit board in 3D

    Motherboard

    ethanjamesauto/modular_8bit_computer

    208 parts2
  • 2 layers86.4 × 53.8 mmSsr load switch, the printed circuit board in 3D

    Ssr load switch

    ethanjamesauto/modular_8bit_computer

    201 parts2
  • 2 layers229.9 × 86.4 mm93c76 revision two, the printed circuit board in 3D

    93c76 revision two

    ethanjamesauto/modular_8bit_computer

    168 parts2
  • 2 layers2.8 × 6.6 mmFish, the printed circuit board in 3D

    Fish

    ethanjamesauto/modular_8bit_computer

    166 parts2
  • 2 layers111.8 × 77.2 mmHp common slot, the printed circuit board in 3D

    Hp common slot

    ethanjamesauto/modular_8bit_computer

    153 parts2
  • 2 layers48.3 × 48.3 mmEddie bldc, the printed circuit board in 3D

    Eddie bldc

    ethanjamesauto/modular_8bit_computer

    138 parts2
  • 2 layers104.1 × 50.8 mmFuck it psu-2, the printed circuit board in 3D

    Fuck it psu-2

    ethanjamesauto/modular_8bit_computer

    75 parts2

Similar boards

  • 2 layers300 × 300 mmSAP Extended, the printed circuit board in 3D

    SAP Extended

    cyrillvalentini/SAP-Extended

    Extended Simple-As-Possible Computer based on Ben Eaters video series

    440 parts1
  • 2 layersComputer, the printed circuit board in 3D

    Computer

    Amp-Lab-at-VT/Simple-PLC

    Simple turing-complete computer using the least components possible

    39 parts
  • 2 layersPlaca receptora, the printed circuit board in 3D

    Placa receptora

    ArqueologiaDigital/SintetizadorGuidoStolfi

    Repositório contendo documentação técnica sobre o sintetisador musical criado na década de 70 na Escola Politécnica da USP pelo professor Guido Stolfi.

    46 parts
  • 2 layers117.5 × 99.7 mmVGA, the printed circuit board in 3D

    VGA

    cherry-takuan/NLP_VGA

    VGA board for NLP-16A

    72 parts
  • 4 layers99 × 63.5 mmKVM Project, the printed circuit board in 3D

    KVM Project

    duplow/setup-kvm-3

    Chaveador KVM para até 3 PCs/aparelhos diferentes conectados simultaneamente, podendo alternar entre si.

    49 partsMIT
  • 2 layers52.3 × 10.5 mmStackLink, the printed circuit board in 3D

    StackLink

    gusmanb/logicanalyzer

    24 channel, 100Msps logic analyzer hardware and software

    29 parts5.1kGPL-3.0
  • 2 layers56 × 20 mmHallEffectXY Endstop, the printed circuit board in 3D

    HallEffectXY Endstop

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    29 parts1.1kGPL-3.0
  • 2 layers50 × 23.2 mmAnalog, the printed circuit board in 3D

    Analog

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    29 parts1kGPL-3.0

Questions

How big is the 8 bit logic analyzer rev 2 PCB?

It measures 71.1 × 25.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the 8 bit logic analyzer rev 2 use?

29 parts, built around the 74LS195APC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the 8 bit logic analyzer rev 2 KiCad files?

From the ethanjamesauto/modular_8bit_computer repository on GitHub, at the commit this page was made from: the board is 8_bit_logic_analyzer_rev_2/8_bit_logic_analyzer_rev_2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the 8 bit logic analyzer rev 2 design in my own project?

Its repository states no licence, so its author keeps all rights: ask ethanjamesauto before reusing the design.