2 layers
2 layers51.4 × 28.6 mm
Highcurrent
etf-lth/rasdaq2Rasdaq Raspberry Pi Data Acquisition: Hardware, Firmware, Tools
- Size
- 51.4 × 28.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 13
- Pads
- 67
- Tracks, vias
- 52, 8
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 31 May 2015
- Updated
- 31 May 2015
Overview
Highcurrent is an open-source printed circuit board by etf-lth, from the etf-lth/rasdaq repository on GitHub. It is a 2-layer board of 51.4 × 28.6 mm with 17 parts on 13 nets, routed with 52 tracks and 8 vias.
It is built around the JUMPER3. Its parts include 7 capacitors, 3 connectors and 2 ICs.
Main components
1README
README.mdRasdaq: Raspberry Pi Data Acquisition
Rasdaq is a 8-channel 16-bit high-speed ADC solution using the Raspberry Pi, with current measurement adapters. Rasdaq was developed by ETF (The Student’s Association for Applied Electronics at the Faculty of Engineering (LTH), Lund University, Sweden) for academic research in power efficiency of graphic accelerators (GPUs).
An illustrated introduction is available here: http://etf.nu/projects/rasdaq
User manual and schematics are available in doc/.
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | P*** | 1pin | 1PIN, 1PIN, 1PIN, 1PIN |
| 2 | 100n | SM0805 | C3, C5 |
| 2 | 1n | SM0805 | C4, C6 |
| 2 | ACS710 | SO16L | U1, U2 |
| 2 | Cf | SM0805 | C1, C2 |
| 1 | CH_A | bornier2 | P1 |
| 1 | CH_B | bornier2 | P2 |
| 1 | JUMPER3 | PIN_ARRAY_3X1 | JP1 |
| 1 | RADAQ | PIN_ARRAY_5x2 | P3 |
| 1 | massor | SM1812L | C7 |
Questions
How big is the Highcurrent PCB?
It measures 51.4 × 28.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Highcurrent use?
17 parts, built around the JUMPER3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Highcurrent KiCad files?
From the etf-lth/rasdaq repository on GitHub, at the commit this page was made from: the board is hardware/highcurrent.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Highcurrent design in my own project?
Its repository states no licence, so its author keeps all rights: ask etf-lth before reusing the design.
More from etf-lth/rasdaq
2- 2 layers30 × 52 mm
Similar boards
- 2 layers271.8 × 114.3 mm
Ardumower mega shield svn
Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)
426 parts282 - 2 layers49 × 49 mm
OSBMS Balancer Rev 0.9
Teslafly/Dead-OpenBMS-dead
A scalable, open source battery management system
76 parts248 - 4 layers137 × 86 mm
- 2 layers100 × 90 mm
- 2 layers59.2 × 41 mm
- 2 layers86 × 54 mm
- 2 layers54.4 × 43.2 mm
- 2 layers146.1 × 53.3 mm
Watersens
whitebox-labs/tentacle
An arduino shield to host and individually isolate up to 4 Atlas Scientific sensor circuits. Measure pH, conductivity, dissolved oxygen, ORP, temperature
77 parts32