Skip to the content
4 layers100 × 96.1 mmDmf relay board, the printed circuit board in 3D

A complete digital microfluidic system including PCB hardware, arduino microcontroller firmware and real-time control software.

Size
100 × 96.1 mm
Copper layers
4
Thickness
1.6 mm
Parts
82
Nets
166
Pads
376
Tracks, vias
1,050, 36
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
4 Jan 2020
Updated
27 Nov 2020

Overview

Dmf relay board is an open-source printed circuit board by esyywar, from the esyywar/Digital-Microfluidic-Control repository on GitHub. It is a 4-layer board of 100 × 96.1 mm with 82 parts on 166 nets, routed with 1,050 tracks and 36 vias.

It is built around the AQY210EHA. Its parts include 5 connectors, 3 resistors, 2 ICs, 2 diodes and 2 fuses. It belongs with the home automation and IoT boards and the AVR (ATmega, ATtiny) boards of this library.

Main components

1

README

README.md

ProtoDrop

ProtoDrop is an inexpensive and easy-to-assemble tool to perform digital microfluidic experiments.

The PCB uses readily available electrical components and the popular Arduino Nano microcontroller.

Firmware is easy to upload using the Arduino IDE and an intuitive LabVIEW GUI executable can be run on any Window's machine.

To get ProtoDrop up and running, you must complete 3 main tasks which are detailed in this guide:

  1. Assemble the electrical hardware
  2. Upload firmware
  3. Install software
  4. Connect high voltage and experiment!

Assembling Hardware

Bill of Materials

ComponentQuantityApproximate Price (USD)
Arduino Nano1$15.00
AQY210EHA1$5.00
HV5071$19.00
SMD LED 0805*2$1.00
10k Ohm SMD Resistor 0805*1$1.00
1k Ohm SMD Resistor 0805*1$1.00
750 Ohm SMD Resistor 0805*1$1.00
2 Pin 5.08 mm Pitch Terminal1$1.00
30 Position FFC Connectors4$15.00
30 Position FFC Ribbon Cables4$10.00

*Cheap surface mount parts are best purchased from a PCB manufacturer who offers SMD service

Uploading Firmware

Install Software

Begin Experimenting!

Parts

82
QtyValueFootprintReferences
36ELEC_SMLdmf_relay_board:ELECTRODE_2_75_4MIL_4_5ESM1, ESM2, ESM10, ESM11, ESM12, ESM13, ESM14, ESM15, ESM16, ESM17, ESM18, ESM19, ESM20, ESM21, ESM22, ESM23 +20
12ELEC_XSdmf_relay_board:ELECTRODE_1_375_4MIL_4_5EXS1, EXS2, EXS4, EXS5, EXS7, EXS8, EXS10, EXS11, EXS13, EXS14, EXS16, EXS17
6MountingHole_3.2mm_M3MountingHole:MountingHole_3.2mm_M3M1, M2, M3, M4, M5, M6
3ELEC_LGdmf_relay_board:ELECTRODE_3_89_4MIL_4_5ELG2, ELG4, ELG6
2Fiducial_1.5mm_Mask3mmFiducial:Fiducial_1.5mm_Mask3mmF1, F2
110kResistor_SMD:R_0805_2012MetricR3
11kResistor_SMD:R_0805_2012MetricR1
1750Resistor_SMD:R_0805_2012MetricR2
1AQY210EHASamacSys_Parts:SOP254P962X315-4NU2
1Arduino_Nano_v2.xModule:Arduino_NanoA1
1BLUE LEDLED_SMD:LED_0805_2012MetricD1
1ELEC_SM_TO_LG_1dmf_relay_board:ELEC_SM_TO_LG_NUM1ELG1
1ELEC_SM_TO_LG_2dmf_relay_board:ELEC_SM_TO_LG_NUM2ELG3
1ELEC_SM_TO_LG_3dmf_relay_board:ELEC_SM_TO_LG_NUM3ELG5
1ELEC_XS_TO_SM_1dmf_relay_board:ELEC_XS_TO_SM_NUM1EXS3
1ELEC_XS_TO_SM_2dmf_relay_board:ELEC_XS_TO_SM_NUM2EXS6
1ELEC_XS_TO_SM_3dmf_relay_board:ELEC_XS_TO_SM_NUM3EXS9
1ELEC_XS_TO_SM_4dmf_relay_board:ELEC_XS_TO_SM_NUM4EXS12
1ELEC_XS_TO_SM_5dmf_relay_board:ELEC_XS_TO_SM_NUM5EXS15
1ELEC_XS_TO_SM_6dmf_relay_board:ELEC_XS_TO_SM_NUM6EXS18
1Electrodes from Relay 1dmf_relay_board:MOLEX_30POS_FFC_TOP_CONNJ4
1Electrodes from Relay 2dmf_relay_board:MOLEX_30POS_FFC_TOP_CONNJ5
1GND to HV-GND JumperConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJP1
1GREEN LEDLED_SMD:LED_0805_2012MetricD2
1HV507HV507:QFP80P2390X1790X340-80NU1
1HVPSdmf_relay_board:TE_HV_2POS_CONN_TBJ1
1Relays to Electrodes 1dmf_relay_board:MOLEX_30POS_FFC_TOP_CONNJ2
1Relays to Electrodes 2dmf_relay_board:MOLEX_30POS_FFC_TOP_CONNJ3

More from esyywar/Digital-Microfluidic-Control

1
  • 4 layers100 × 90 mmSensor dmf board, the printed circuit board in 3D

    Sensor dmf board

    esyywar/Digital-Microfluidic-Control

    A complete digital microfluidic system including PCB hardware, arduino microcontroller firmware and real-time control software.

    58 parts2

Similar boards

  • 4 layers43.7 × 40.9 mmAdam's Drone FCU, the printed circuit board in 3D

    Adam's Drone FCU

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    82 parts915
  • 4 layers78 × 58 mmSfp to sma, the printed circuit board in 3D

    Sfp to sma

    azonenberg/starshipraider

    Open hardware test equipment

    82 parts193BSD-3-Clause
  • 4 layers96 × 94.2 mmDreamdrivecast v1aa, the printed circuit board in 3D

    Dreamdrivecast v1aa

    khill25/Dreamdrive

    Open source Retro Rom Carts and ODEs by Dreamcraft Industries

    82 parts26
  • 4 layers39 × 92 mmChaac ng, the printed circuit board in 3D

    Chaac ng

    alvarop/chaac

    This is a work in progress for a wireless weather station project.

    82 parts21MIT
  • 4 layers50.8 × 22.9 mmRPGA Feather, the printed circuit board in 3D

    RPGA Feather

    Oak-Development-Technologies/RPGA-Feather

    Home of everything RPGA! From schematics and board files to buildable examples!

    82 parts20MIT
  • 4 layers65 × 56 mmPiHatAx5043, the printed circuit board in 3D

    PiHatAx5043

    BrandenburgTech/DigitalTxRxRPi

    82 parts17
  • 4 layers48.4 × 48.4 mmSolar Panel X, the printed circuit board in 3D

    Solar Panel X

    AFS-pt/PROMETHEUS-1

    Documentation lives here: https://afs-pt.github.io/PROMETHEUS-1

    82 parts15
  • 4 layers57.4 × 49.9 mmPhoniesp32, the printed circuit board in 3D

    Phoniesp32

    butzist/phoniesp32

    A kid-friendly jukebox powered by the ESP32

    82 parts11MIT

Questions

How big is the Dmf relay board PCB?

It measures 100 × 96.1 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Dmf relay board use?

82 parts, built around the AQY210EHA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Dmf relay board KiCad files?

From the esyywar/Digital-Microfluidic-Control repository on GitHub, at the commit this page was made from: the board is dmf_relay_board/dmf_relay_board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Dmf relay board design in my own project?

Its repository states no licence, so its author keeps all rights: ask esyywar before reusing the design.