2 layers
2 layers
AquariumUnit v2
eskrut/kicadProject- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 26
- Nets
- 40
- Pads
- 95
- Tracks, vias
- 222, 6
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 6 Jun 2016
- Updated
- 16 Sep 2017
Overview
AquariumUnit v2 is an open-source printed circuit board by eskrut, from the eskrut/kicadProject repository on GitHub. It is a 2-layer board with 26 parts on 40 nets, routed with 222 tracks and 6 vias.
It is built around the ESP-12E, LM317T and ULN2003. Its parts include 9 resistors, 8 connectors, 3 ICs, 3 transistors and 2 diodes. It belongs with the ESP8266 boards of this library.
Main components
3
ESP-12E
SMD,24x16mm-20℃~+70℃ -90dBm 16dBm 170mA 2.4GHz 3V~3.6V 56mA 802.11b/g/n ESP8266 Chip On-board PCB Antenna Over-the-air (OTA) update UART、SPI、I2C SMD,24x16mm WiFi Modules ROHSAi-ThinkerWiFi Modules
LM317T
TO-2200.003%Vout 0℃~+125℃@(Tj) 1 1.2V~37V 1.5A 40V 66dB@(120Hz) Adjustable Over Current Protection、Over Temperature Protection Positive TO-220 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSUMWVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
ULN2003
SOP-161.1V@250uA,100mA 25pF 2V 30V 500mA 50uA 50uA Seven channels SOP-16 Darlington Transistor Arrays ROHSBLDarlington Transistor Arrays
Parts
26| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10K | Resistors_SMD:R_1210_HandSoldering | R1, R2, R3, R4, R5 |
| 2 | D | Diodes_ThroughHole:Diode_DO-35_SOD27_Horizontal_RM10 | D1, D2 |
| 1 | 0.1uF | Capacitors_SMD:C_1210_HandSoldering | C1 |
| 1 | 330 | Resistors_ThroughHole:Resistor_Vertical_RM5mm | R7 |
| 1 | 4.7K | Resistors_SMD:R_1210_HandSoldering | R6 |
| 1 | 470 | Resistors_SMD:R_1210_HandSoldering | R9 |
| 1 | 560 | Resistors_ThroughHole:Resistor_Vertical_RM5mm | R8 |
| 1 | BUTTONS | Pin_Headers:Pin_Header_Straight_1x03 | P4 |
| 1 | DS | Pin_Headers:Pin_Header_Straight_1x03 | P6 |
| 1 | ESP-12E | ESP8266:ESP-12E | U1 |
| 1 | FAN | Pin_Headers:Pin_Header_Straight_1x02 | P5 |
| 1 | FAN_MOS | TO_SOT_Packages_THT:TO-220_Neutral123_Vertical | Q2 |
| 1 | LED_MOS | TO_SOT_Packages_THT:TO-220_Neutral123_Vertical | Q3 |
| 1 | LED_STRIP | Connect:AK300-2 | P8 |
| 1 | LM317T | Power_Integrations:TO-220 | U2 |
| 1 | POWER | Connect:AK300-2 | P3 |
| 1 | PUMP | Pin_Headers:Pin_Header_Straight_1x02 | P2 |
| 1 | PUMP_MOS | TO_SOT_Packages_THT:TO-220_Neutral123_Vertical | Q1 |
| 1 | SERVO | Pin_Headers:Pin_Header_Straight_1x03 | P1 |
| 1 | SUB_LEDS | Pin_Headers:Pin_Header_Straight_1x04 | P7 |
| 1 | ULN2003 | SMD_Packages:SO-16-N | U3 |
More from eskrut/kicadProject
9- 2 layers45.7 × 50.8 mm
- 2 layers33 × 64.8 mm
- 2 layers38.7 × 34.9 mm
- 2 layers31.1 × 54.6 mm
- 2 layers35 × 57.5 mm
- 2 layers32 × 52 mm
- 2 layers60.3 × 27.9 mm
- 2 layers32.4 × 28.6 mm
Similar boards
- 2 layers60 × 100 mm
PCB01 KiCAD
Sajitha-Aldeniya/IOT-Based-fish-feeder
The IOT Based fish feeder is a small device which is design for aquarium industry. Specially for the small and lag scale fish farms, which need lot of man power to feed the fish in time.
33 parts2 - 2 layers130.8 × 97 mm
- 2 layers99.1 × 99.1 mm
Power supply panelized
thebiguno/microcontroller-projects
A home for a bunch of microcontroller projects which don't warrant their own repos.
223 parts75 - 2 layers60 × 50 mm
- 2 layers100 × 80 mm
- 2 layers151.3 × 50.8 mm
- 2 layers
LEDControlPCBSMDV2
BioARTS-Lab/Miniature_Microscope
3D-printed fluorescence miniature microscope
31 parts6GPL-3.0 - 2 layers90.4 × 60.5 mm
PSU
jscrane/PSU
Software-controlled variable-voltage power supply with current and power monitoring
19 parts5Apache-2.0
Questions
What parts does the AquariumUnit v2 use?
26 parts, built around the ESP-12E, LM317T and ULN2003. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the AquariumUnit v2 KiCad files?
From the eskrut/kicadProject repository on GitHub, at the commit this page was made from: the board is aquariumUnit_v2/aquariumUnit_v2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the AquariumUnit v2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask eskrut before reusing the design.