

PoolUnit v2
- Size
- 45.7 × 50.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 25
- Pads
- 70
- Tracks, vias
- 156, 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 6 Jun 2016
- Updated
- 16 Sep 2017
Overview
PoolUnit v2 is an open-source printed circuit board by eskrut, from the eskrut/kicadProject repository on GitHub. It is a 2-layer board of 45.7 × 50.8 mm with 21 parts on 25 nets, routed with 156 tracks and 2 vias.
It is built around the ESP-12E. Its parts include 11 resistors, 7 connectors, 2 ICs and 1 capacitor. It belongs with the ESP8266 boards of this library.
Main components
1Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10k | Resistors_SMD:R_1210_HandSoldering | R5, R6, R7, R8, R9, R11 |
| 2 | 4k7 | Resistors_SMD:R_1210_HandSoldering | R3, R4 |
| 1 | 0.1muF | Capacitors_SMD:C_1210_HandSoldering | C1 |
| 1 | 1K0 | Resistors_ThroughHole:Resistor_Vertical_RM5mm | R2 |
| 1 | 3K9 | Resistors_ThroughHole:Resistor_Vertical_RM5mm | R1 |
| 1 | 470 | Resistors_SMD:R_1210_HandSoldering | R10 |
| 1 | ESP-12E | ESP8266:ESP-12E | U1 |
| 1 | PH | Pin_Headers:Pin_Header_Straight_1x04 | P3 |
| 1 | POWER | Pin_Headers:Pin_Header_Straight_1x02 | P5 |
| 1 | PROG | Pin_Headers:Pin_Header_Straight_1x05 | P4 |
| 1 | REG3V3 | TO_SOT_Packages_SMD:TO-252-2Lead | U2 |
| 1 | RST | Pin_Headers:Pin_Header_Straight_1x02 | P6 |
| 1 | T0 | Pin_Headers:Pin_Header_Straight_1x03 | P1 |
| 1 | T1 | Pin_Headers:Pin_Header_Straight_1x03 | P2 |
| 1 | TST | Pin_Headers:Pin_Header_Straight_1x02 | P7 |
More from eskrut/kicadProject
9- 2 layers

- 2 layers

- 2 layers33 × 64.8 mm

- 2 layers38.7 × 34.9 mm

- 2 layers31.1 × 54.6 mm

- 2 layers35 × 57.5 mm

- 2 layers32 × 52 mm

- 2 layers60.3 × 27.9 mm

- 2 layers32.4 × 28.6 mm

Similar boards
- 2 layers33.7 × 97.8 mm

HAN ESP TSS721
UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported
29 parts470 - 2 layers43 × 34.3 mm

- 2 layers25.6 × 23 mm

Breakout
skorokithakis/tiny-ESP8266-breakout
A very small and basic ESP8266 breakout board
12 parts115BSD-2-Clause - 2 layers104.8 × 72.1 mm

SST V2 4
mcbittech/souliss-smart-thermostat-WiFi
ESP8266 WiFi Smart Thermostat based on Souliss IoT Framework
53 parts110GPL-2.0 - 2 layers30 × 65 mm

Hardpass pcb
girst/hardpass-passwordmanager-mirror-of-git.gir.st
https://git.gir.st/hardpass.git - Seldomly Updated Mirror: Hardpass is a Raspberry Pi Zero based hardware password manager, using passwordstore.org.
34 parts101GPL-3.0 - 2 layers82.5 × 22.4 mm

Window Sensor
MakerMeik/Window-Sensor
Here you will find all the files you need to build an ESP8266-based window sensor whose battery will last for several years. Have a look at my video on Youtube: https://youtu.be/vxbuO1zWo3w
19 parts67 - 2 layers49.5 × 30 mm

- 2 layers100 × 45 mm

Questions
How big is the PoolUnit v2 PCB?
It measures 45.7 × 50.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PoolUnit v2 use?
21 parts, built around the ESP-12E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PoolUnit v2 KiCad files?
From the eskrut/kicadProject repository on GitHub, at the commit this page was made from: the board is poolUnit_v2/poolUnit_v2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the PoolUnit v2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask eskrut before reusing the design.