2 layers53.5 × 101.8 mm
Sony scopeman
lucysrausch/sony-scopeman
Hardware Design files of a replacement mainboard for the Sony Watchman FD-10. This turns it into a bluetooth and WiFi-enabled vector display.
135 parts69
2 layers108 × 53.1 mm
Hyasynth
ESETP/hyasynth-pcb1PCB for hayasynth
- Size
- 108 × 53.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 38
- Nets
- 39
- Pads
- 164
- Tracks, vias
- 442, 16
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 12 Jan 2022
- Updated
- 29 Feb 2024
Overview
Hyasynth is an open-source printed circuit board by ESETP, from the ESETP/hyasynth-pcb repository on GitHub. It is a 2-layer board of 108 × 53.1 mm with 38 parts on 39 nets, routed with 442 tracks and 16 vias.
It is built around the EFM8LB12F64E-B-QFN32 and PAM8302AADCR. Its parts include 17 switches, 8 capacitors, 6 connectors, 3 resistors and 2 ICs. It belongs with the Silicon Labs (EFR32, EFM) boards of this library.
Main components
2
EFM8LB12F64E-B-QFN32
VQFN-32-EP(4x4)-40℃~+105℃ 2.2V~3.6V 28 4.25KB 51 Family 64KB 72MHz 8 Bit Built-in FLASH VQFN-32-EP(4x4) Microcontrollers (MCU/MPU/SOC) ROHSSilicon LabsMicrocontrollers (MCU/MPU/SOC)
PAM8302AADCR
SOP-8-40℃~+85℃ 0.3% 1-Channel 2.5Wx1@4Ω 2V~5.5V 4mA 50dB 80dB 85% Class D Filterless architecture SOP-8 Audio Amplifiers ROHSDiodes IncorporatedAudio Amplifiers
README
README.mdhayasynth-pcb
PCB for hayasynth
Parts
38| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 0.1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C4, C10, C11 |
| 2 | 4.7u | Capacitor_Tantalum_SMD:CP_EIA-6032-28_Kemet-C_Pad2.25x2.35mm_HandSolder | C1, C3 |
| 2 | Battery_Cell | Battery:Battery AAA | BT1, BT2 |
| 2 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2, J4 |
| 2 | R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R5 |
| 1 | 10u | Capacitor_Tantalum_SMD:CP_EIA-7343-31_Kemet-D_Pad2.25x2.55mm_HandSolder | C5 |
| 1 | 1u | Capacitor_Tantalum_SMD:CP_EIA-3528-12_Kemet-T_Pad1.50x2.35mm_HandSolder | C12 |
| 1 | 8 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | A | Button:SW_Push_hand_solder | SW11 |
| 1 | A# Bb | Button:SW_Push_hand_solder | SW12 |
| 1 | AudioJack3_SwitchTR | Jack:Jack | J6 |
| 1 | B | Button:SW_Push_hand_solder | SW13 |
| 1 | C | Button:SW_Push_hand_solder | SW14 |
| 1 | C# Db | Button:SW_Push_hand_solder | SW3 |
| 1 | Conn_01x04_Male | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J1 |
| 1 | Conn_01x04_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | Conn_01x06_Male | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | D | Button:SW_Push_hand_solder | SW4 |
| 1 | D# Eb | Button:SW_Push_hand_solder | SW5 |
| 1 | Down Octave | Button:SW_Push_hand_solder | SW15 |
| 1 | E | Button:SW_Push_hand_solder | SW6 |
| 1 | EFM8LB12F64E-B-QFN32 | QFN32:EFM8LB12F64E-B-QFN32 | U1 |
| 1 | F | Button:SW_Push_hand_solder | SW7 |
| 1 | F# Gb | Button:SW_Push_hand_solder | SW8 |
| 1 | Function | Button:SW_Push_hand_solder | SW16 |
| 1 | G | Button:SW_Push_hand_solder | SW9 |
| 1 | G# Ab | Button:SW_Push_hand_solder | SW10 |
| 1 | Low C | Button:SW_Push_hand_solder | SW2 |
| 1 | PAM8302AAD | Package_SO:MSOP-8_3x3mm_P0.65mm | U3 |
| 1 | Power Switch | Switch:Slide Switch | SW1 |
| 1 | Up Octave | Button:SW_Push_hand_solder | SW17 |
Similar boards
- 2 layers47 × 61.7 mm
Basic emulator
FromDarkHell/EmuToLife
A Raspberry Pi Pico based emulator for toys to life games (LEGO Dimensions)
34 parts11MIT - 4 layers127.5 × 51.5 mm
EMIsniffer
evabits/EMI_sniffer_beursgadget_WOTS_2026
Schematics. Layout and Firmware of the WOTS2026 beursgadget.
174 parts7MIT - 2 layers132 × 100 mm
- 2 layers65 × 67.5 mm
Gb walkie
idlehandsdev/gb_walkie_talkie
An open source "Fake" walkie-talkie for the Fake Ghost Tours for my friends in Vancouver.
75 parts4 - 2 layers48.3 × 22.9 mm
Buddhabox
emeb/RP2040_Projects
A collection of random projects based on the Raspberry Pi RP2040 MCU
51 parts3MIT - 2 layers25.4 × 17.8 mm
CE Makerverse PAM8302-Class D Amplifier
CoreElectronics/CE-Makerverse-PAM8302-Class-D-Amplifier
This is the repo for the Core Electronics Makerverse PAM8302 Class D Amplifier.
27 parts1 - 4 layers81.7 × 100.6 mm
Final Project PCB
ndesserich/ECE-36200-Final-Project-PCB
A PCB that integrates an RP2350 and various peripherals to play games.
80 parts1
Questions
How big is the Hyasynth PCB?
It measures 108 × 53.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Hyasynth use?
38 parts, built around the EFM8LB12F64E-B-QFN32 and PAM8302AADCR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Hyasynth KiCad files?
From the ESETP/hyasynth-pcb repository on GitHub, at the commit this page was made from: the board is hyasynth/hyasynth.kicad_pcb and its schematic hyasynth/hyasynth.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Hyasynth design in my own project?
Its repository states no licence, so its author keeps all rights: ask ESETP before reusing the design.