
L103 CANUSB DRV8313
bjthemost-hub/l103-drv8313-as5600
Joint motor driver: CH32L103 + DRV8313 + AS5600. KiCad hardware, FOC firmware, PC tools, 2-stage planetary gearbox (J, 25:1). MIT.

ch32l103k8u6-devboard with JW5026 buck DCDC
Ch32l103k8u6-devboard is an open-source printed circuit board by esehehelp, from the esehehelp/ch32l103k8u6-devboard repository on GitHub, published under the MIT licence. It is a 2-layer board of 12.7 × 48.3 mm with 17 parts on 44 nets, routed with 266 tracks and 64 vias.
It is built around the CH32L103K8U6 and XC6206P332MR. Its parts include 5 capacitors, 4 resistors, 3 ICs, 3 connectors and 1 diode. It belongs with the microcontroller boards and power boards of this library.
サイズ: 48.3mm x 12.7mm
MCU: CH32L103K8U6
電源:
JW5026 同期整流DCDC (5V/1A出力)
XC6206 (3.3V/200mA出力)
特徴:
USB PD対応 (最大20V入力)
ブレッドボードに最適 (12.7mm幅)
ライセンス: MIT License
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 0.1u/50V | Capacitor_SMD:C_0603_1608Metric | C1, C4 |
| 2 | 10u/35V | Capacitor_SMD:C_0603_1608Metric | C2, C3 |
| 2 | 120k | Resistor_SMD:R_0603_1608Metric | R1, R3 |
| 2 | Pinheader_P2.54mm_16P | Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_Vertical | J2, J3 |
| 1 | 10u/1.5A | Inductor_SMD:L_Changjiang_FNR4020S | L1 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 22k | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 22u/10V | Capacitor_SMD:C_0603_1608Metric | C5 |
| 1 | CH32L103K8U6 | Package_DFN_QFN:QFN-32-1EP_4x4mm_P0.4mm_EP2.9x2.9mm | U1 |
| 1 | JW5026 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | Red/Vf1.7 | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | USB_C_Receptacle | Download_Lib:USB-C_16-HandSolder | J5 |
| 1 | XC6206P332MR | Package_TO_SOT_SMD:SOT-23-3 | U3 |

bjthemost-hub/l103-drv8313-as5600
Joint motor driver: CH32L103 + DRV8313 + AS5600. KiCad hardware, FOC firmware, PC tools, 2-stage planetary gearbox (J, 25:1). MIT.

bjthemost-hub/l103-drv8316c-joint
Joint motor driver: CH32L103 + DRV8316C + MT6701. KiCad hardware, FOC firmware, 2-stage planetary gearbox (J, 25:1). MIT.

Hanqaqa/Easyduino
Easily dive into different PCB KiCad designs of the most popular microcontroller devboards

makeo/PicoLoader
A cheap and easy to install modchip for the Nintendo GameCube!

sd2psx/pcb
The PCB must be produced in 0.8mm thickness. Production files are provided under the "Releases" tab. These do not include the through-hole OLED module.



KarlK90/yaemk-split-kb
5x8 Split keyboard with thumb-clusters, rotary encoders and oleds.
It measures 12.7 × 48.3 mm and has 2 copper layers, 1.6 mm thick.
17 parts, built around the CH32L103K8U6 and XC6206P332MR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the esehehelp/ch32l103k8u6-devboard repository on GitHub, at the commit this page was made from: the board is ch32l103k8u6_devboard.kicad_pcb and its schematic ch32l103k8u6_devboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).