

Squishy phy se
Squishy hardware design files
- Size
- 75 × 55 mm
- Copper layers
- 6
- Thickness
- 1.56 mm
- Parts
- 22
- Nets
- 123
- Pads
- 229
- Tracks, vias
- 0, 138
- Pours
- 5
- Routed
- Not yet
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 2 Oct 2024
- Updated
- 2 Oct 2024
Overview
Squishy phy se is an open-source printed circuit board by esden, from the esden/squishy-hardware repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 6-layer board of 75 × 55 mm with 22 parts on 123 nets.
It is built around the M24C02-RMC6TG, CRCW060310K0FKEAC and 10144518-101802LF, with the 10144517-102802LF among its other parts. Its parts include 2 connectors, 1 capacitor, 1 resistor and 1 IC.
Main components
4M24C02-RMC6TG
DFN-8(2x3)-40℃~+85℃ 1.8V~5.5V 200 Years 2Kbit 4,000,000 Cycles 400kHz 5ms Hardware write protection function、Built-in power-on reset (POR) I2C DFN-8(2x3) EEPROM ROHSSTMicroelectronicsEEPROMCRCW060310K0FKEAC
0603-55℃~+155℃ 100mW 10kΩ 75V Thick Film Resistor ±1% ±100ppm/℃ 0603 Chip Resistor - Surface Mount ROHSVishay IntertechnologyChip Resistor - Surface Mount10144518-101802LF
SMD,P=0.8mm0.8mm 100P 2 Copper alloy Gold Surface Mount,Vertical SMD,P=0.8mm Board-to-Board and Backplane Connector ROHSAmphenolBoard-To-Board And Backplane Connector10144517-102802LF
SMD,P=0.8mm-40℃~+125℃ 0.8mm 100P 100V 2 500mA Copper alloy Gold Surface Mount,Vertical SMD,P=0.8mm Board-to-Board and Backplane Connector ROHSAmphenolBoard-To-Board And Backplane Connector
README
README.mdSquishy - Hardware
This repository contains the hardware design files for Squishy.
You can view a live rendering of the WIP hardware in your web browser here, thanks to KiCanvas.
[!IMPORTANT] If you're looking for the Squishy software/gateware, they can be found at
squishy-scsi/squishy.
Documentation
The documentation for the Squishy hardware can be found here.
License
The hardware design files for Squishy are licensed under the CERN-OHL-S, the license for which can be found in LICENSE
Parts
22| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4 |
| 3 | Fiducial | Fiducial:Fiducial_0.75mm_Mask1.5mm | FID1, FID3, FID5 |
| 1 | 100n | rhais_rcl:C0603 | C1 |
| 1 | 10k | rhais_rcl:R0603 | R1 |
| 1 | G*** | kibuzzard-66793C11 | kibuzzard-66793C11 |
| 1 | G*** | kibuzzard-6685DA1D | kibuzzard-6685DA1D |
| 1 | M24C02-RMC | lethalbit-memory:ST_UFDFPN-8-1EP_2x3mm_P0.5mm_EP1.6x1.6mm | U1 |
| 1 | SCSI Connector | lethalbit-connectors:101445x-10x80xLF | J2 |
| 1 | SCSI PHY Mezz | lethalbit-connectors:1014457-10x80xLF | J1 |
The 14 most common of 22 parts.
More from esden/squishy-hardware
10- 8 layers245 × 129 mm

- 8 layers75 × 115 mm

- 6 layers75 × 55 mm

- 4 layers85 × 85 mm

- 4 layers121.4 × 109.4 mm

- 6 layers75 × 55 mm

- 6 layers75 × 34 mm

- 6 layers75 × 34 mm

- 6 layers75 × 34 mm

- 6 layers75 × 34 mm

Similar boards
- 4 layers52.5 × 20.5 mm

- 4 layers51.8 × 32 mm

- 8 layers90.5 × 49.5 mm

- 4 layers97 × 105.5 mm

STARDRIVE SHIELD V1 0
themarcolab/Stardrive-Shield
With STARDRIVE SHIELD you can implement from 6 step to FOC motor control algorithms.
193 parts2 - 6 layers162 × 171 mm

Adc board prot
bcancinov/4-channel-adc-module
4 Channel ADC module for detector controller prototype
383 parts1 - 4 layers154 × 81 mm

System candidate
bernardopg/ps28-modern-amp
Infinity Primus PS28 amplifier modernization: TPA3255 engineering, validation and safety-gated workflow
269 parts1 - 4 layers40 × 30 mm

Health Watch
abendezu10/PulseWatch
Developed a fully functional smartwatch using an STM32 microcontroller, featuring real-time heart rate monitoring.
37 parts - 4 layers54.6 × 61 mm

SapphineMinimal
ChrisHayward-dev/SapphireKicad
See the LastProduction branch for the most current revision
159 parts
Questions
How big is the Squishy phy se PCB?
It measures 75 × 55 mm and has 6 copper layers, 1.56 mm thick.
What parts does the Squishy phy se use?
22 parts, built around the M24C02-RMC6TG, CRCW060310K0FKEAC, 10144518-101802LF and 10144517-102802LF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Squishy phy se KiCad files?
From the esden/squishy-hardware repository on GitHub, at the commit this page was made from: the board is boards/squishy/phy-modules/scsi-se/squishy-phy-se.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Squishy phy se design in my own project?
Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).