

Squishy main
Squishy hardware design files
- Size
- 75 × 115 mm
- Copper layers
- 8
- Thickness
- 1.62 mm
- Parts
- 335
- Nets
- 416
- Pads
- 1,606
- Tracks, vias
- 3,171, 876
- Pours
- 54
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 2 Oct 2024
- Updated
- 2 Oct 2024
Overview
Squishy main is an open-source printed circuit board by esden, from the esden/squishy-hardware repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is an 8-layer board of 75 × 115 mm with 335 parts on 416 nets, routed with 3,171 tracks and 876 vias.
It is built around the ATSAMD09D14A-MU, AP3428DNTR-G1 and S80KS5122GABHI020, with the TPD4E02B04DQAR, 74HC1G02GW,125 and CRCW060310K0FKEAC among its other parts. Its parts include 110 capacitors, 80 resistors, 12 ICs, 12 diodes and 6 transistors. It belongs with the SAM D and SAM boards of this library.
Main components
12ATSAMD09D14A-MU
QFN-24-EP(4x4)-40℃~+85℃ 1.62V~3.63V 12bit 16KB 22 32 Bit 48MHz 4KB ARM Cortex-M0+ Built-in FLASH QFN-24-EP(4x4) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)AP3428DNTR-G1
UDFN2020-6-40℃~+85℃ 1 1.5MHz 1A 2.5V~5.5V 40uA 600mV~5.5V Adjustable Buck Buck Built-in UDFN2020-6 DC-DC Converters ROHSDiodes IncorporatedDC-DC ConvertersS80KS5122GABHI020
FBGA-24(6x8)FBGA-24(6x8) DRAM ROHSInfineon TechnologiesSRAMTPD4E02B04DQAR
USON-10(1x2.5)-40℃~+125℃ 0.33pF 10nA 17W@8/20us 2A@8/20us 3.6V 7.5V 8.8V Bidirectional Four channels IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 TVS USON-10(1x2.5) ESD and Surge Protection (TVS/ESD) ROHSTexas InstrumentsESD And Surge Protection (TVS/ESD)74HC1G02GW,125
TSSOP-5-1.3mm-40℃~+125℃ 1 1.5V、3.15V、4.2V 1.9V、4.4V、5.9V 100mV、400mV、400mV 2 2.6mA 2.6mA 20uA 2V~6V 500mV、1.35V、1.8V 74HC 8ns@6V,50pF NOR Gate TSSOP-5-1.3mm Logic Gates ROHSNexperiaLogic GatesCRCW060310K0FKEAC
0603-55℃~+155℃ 100mW 10kΩ 75V Thick Film Resistor ±1% ±100ppm/℃ 0603 Chip Resistor - Surface Mount ROHSVishay IntertechnologyChip Resistor - Surface MountCRCW06034K70FKEAC
0603-55℃~+155℃ 100mW 4.7kΩ Thick Film Resistor ±1% ±100ppm/℃ 0603 Chip Resistor - Surface Mount ROHSVishay IntertechnologyChip Resistor - Surface MountUMK107BJ105KA-T
06031uF 50V X5R ±10% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSTaiyo YudenMultilayer Ceramic Capacitors MLCC - SMD/SMTAC0201KRX7R8BB103
020110nF 25V X7R ±10% 0201 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSYAGEOMultilayer Ceramic Capacitors MLCC - SMD/SMTCRCW06032K20FKEAC
0603-55℃~+155℃ 100mW 2.2kΩ Thick Film Resistor ±1% ±100ppm/℃ 0603 Chip Resistor - Surface Mount ROHSVishay IntertechnologyChip Resistor - Surface Mount150060VS75000
SMD,1.6x0.8mm-40℃~+85℃ 140° 2.4V 20mA 40mcd 570nm 572nm 72mW Discrete Diode Green SMD,1.6x0.8mm LED Indication - Discrete ROHSWürth ElektronikLight Emitting Diodes (LED)CAY16-103J4LF
0603x410kΩ 4 62.5mW 8 ±200ppm/℃ ±5% 0603x4 Resistor Networks, Arrays ROHSBournsResistor Networks & Arrays
README
README.mdSquishy - Hardware
This repository contains the hardware design files for Squishy.
You can view a live rendering of the WIP hardware in your web browser here, thanks to KiCanvas.
[!IMPORTANT] If you're looking for the Squishy software/gateware, they can be found at
squishy-scsi/squishy.
Documentation
The documentation for the Squishy hardware can be found here.
License
The hardware design files for Squishy are licensed under the CERN-OHL-S, the license for which can be found in LICENSE
Parts
335| Qty | Value | Footprint | References |
|---|---|---|---|
| 21 | 10k | rhais_rcl:R0603 | R4, R12, R17, R28, R32, R36, R40, R51, R54, R59, R60, R61, R62, R63, R64, R65 +5 |
| 17 | 100n | Capacitor_SMD:C_0201_0603Metric | C50, C52, C53, C54, C57, C60, C65, C66, C72, C73, C74, C79, C81, C100, C102, C106 +1 |
| 17 | 4k7 | rhais_rcl:R0603 | R5, R6, R22, R37, R38, R39, R44, R45, R49, R58, R71, R72, R73, R74, R75, R76 +1 |
| 16 | 100n | rhais_rcl:C0402 | C2, C3, C4, C5, C9, C10, C31, C34, C35, C36, C37, C41, C44, C86, C96, C97 |
| 15 | 1u | rhais_rcl:C0603 | C6, C17, C20, C21, C30, C39, C40, C42, C43, C45, C48, C80, C87, C88, C99 |
| 12 | 100n | rhais_rcl:C0603 | C7, C8, C11, C13, C14, C19, C23, C25, C47, C92, C95, C98 |
| 12 | 10n | Capacitor_SMD:C_0201_0603Metric | C51, C55, C58, C61, C67, C68, C69, C70, C82, C84, C108, C111 |
| 9 | 2k2 | rhais_rcl:R0603 | R7, R24, R25, R26, R31, R34, R78, R79, R80 |
| 8 | 1u | Capacitor_SMD:C_0201_0603Metric | C63, C75, C76, C77, C78, C103, C104, C105 |
| 7 | GREEN | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D7, D8, D9, D10, D11, D12, D16 |
| 6 | 10K | rhais_rcl:R0603_Array_Concave_4 | R14, R35, R46, R48, R50, R66 |
| 6 | 1n | Capacitor_SMD:C_0201_0603Metric | C56, C59, C62, C85, C109, C112 |
| 6 | Fiducial | Fiducial:Fiducial_0.75mm_Mask1.5mm | FID1, FID2, FID3, FID4, FID5, FID6 |
| 5 | 1k | rhais_rcl:R0603 | R1, R21, R23, R27, R42 |
| 5 | GND | TestPoint:TestPoint_Pad_D1.0mm | TP3, TP5, TP7, TP9, TP12 |
| 4 | 10n | rhais_rcl:C0603 | C1, C15, C18, C22 |
| 4 | 10u | rhais_rcl:C0805 | C27, C29, C32, C33 |
| 4 | 10u | rhais_rcl:C0603 | C16, C46, C89, C93 |
| 4 | HyperRAM | lethalbit-memory:TFBGA-24-6x8mm-1.0mm | U2, U3, U14, U15 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4 |
| 4 | NX6008NBKR | Package_TO_SOT_SMD:SOT-23 | Q2, Q3, Q4, Q5 |
| 2 | 0 | rhais_rcl:R0402 | R29, R30 |
| 2 | 100 | rhais_rcl:R0402 | R11, R13 |
| 2 | 100k | rhais_rcl:R0603 | R19, R20 |
| 2 | 1M | rhais_rcl:R0603 | R8, R41 |
| 2 | 300p | rhais_rcl:C0603 | C49, C91 |
| 2 | 4u7 | rhais_rcl:C0402 | C64, C71 |
| 2 | 50m | rhais_rcl:R0805 | R52, R53 |
| 2 | 600 @ 100MHz | rhais_rcl:R0805 | FB2, FB3 |
| 2 | 7A | Fuse:Fuse_1206_3216Metric | F1, F2 |
| 2 | BLUE | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2, D6 |
| 2 | DMN65D8L-7 | Package_TO_SOT_SMD:SOT-23 | Q8, Q9 |
| 2 | PINK | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D3, D5 |
| 2 | TPD4E02B04DQA | rhais_package-qfn:USON-10_2.5x1.0mm_P0.5mm | U6, U8 |
| 2 | TPS7A1112PDRVT | Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm | U16, U20 |
| 1 | 100MHz | lethalbit:AK3A-xxxMHz | X1 |
| 1 | 10m | rhais_rcl:R0603 | R16 |
| 1 | 12n | rhais_rcl:C0402 | C26 |
| 1 | 13MHz | rhais_osc:SMD2520 | X2 |
| 1 | 150k | rhais_rcl:R0603 | R43 |
| 1 | 178k | rhais_rcl:R0603 | R57 |
| 1 | 1u | lethalbit-inductor:L_Vishay_IHLP-3232 | L3 |
| 1 | 1u5 | lethalbit-inductor:Bourns-SRF1260 | L1 |
| 1 | 1v2 | TestPoint:TestPoint_Pad_D1.0mm | TP11 |
| 1 | 1v2A | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | 1v8 | TestPoint:TestPoint_Pad_D1.0mm | TP13 |
| 1 | 200MHz | lethalbit:AK2A-xxxMHz | X3 |
| 1 | 22p | rhais_rcl:C0603 | C90 |
| 1 | 22u | rhais_rcl:C0603 | C101 |
| 1 | 24.25V @ 120mA | Diode_SMD:D_SOD-323 | D13 |
| 1 | 249k | rhais_rcl:R0603 | R55 |
| 1 | 2u2 | rhais_rcl:L0603 | L2 |
| 1 | 2u2 | rhais_rcl:C0603 | C24 |
| 1 | 2u2 | Capacitor_SMD:C_1812_4532Metric | C28 |
| 1 | 2v5 | TestPoint:TestPoint_Pad_D1.0mm | TP4 |
| 1 | 300k | rhais_rcl:R0603 | R33 |
| 1 | 39k2 | rhais_rcl:R0603 | R56 |
| 1 | 3v3 | TestPoint:TestPoint_Pad_D1.0mm | TP6 |
| 1 | 40k | rhais_rcl:R0603 | R18 |
| 1 | 40k2 | rhais_rcl:R0402 | R3 |
| 1 | 47u | lethalbit:C_Elec_KEMET_EB | C94 |
| 1 | 48MHz | rhais_osc:SMD3225 | X4 |
| 1 | 4u7 | rhais_rcl:C0603 | C12 |
| 1 | 52R3 | rhais_rcl:R0603 | R47 |
| 1 | 5V | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | 5k36 | rhais_rcl:R0603 | R15 |
| 1 | 74AHC1G02 | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U24 |
| 1 | 80k6 | rhais_rcl:R0402 | R2 |
| 1 | 820p | rhais_rcl:C0402 | C38 |
| 1 | 8k06 | rhais_rcl:R0603 | R10 |
| 1 | AP3428/A | Package_DFN_QFN:DFN-6-1EP_2x2mm_P0.65mm_EP1.01x1.7mm | U21 |
| 1 | APX811-40UG-7 | Package_TO_SOT_SMD:SOT-143 | U4 |
| 1 | ATSAMD09D14A-M | rhais_package-qfn:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U11 |
| 1 | Antifaschistische_Aktion | lethalbit-graphics:Antifaschistische Aktion_600dpi | G1 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | DC Polarity | lethalbit-graphics:DC-Center-Positive | G8 |
| 1 | DFU | rhais_button-smd:B3U-1000P-B | SW2 |
| 1 | FLASH | lethalbit-connectors:FTSH-105-01-L-DV-K-TR | J8 |
| 1 | FLASH_CIPO | TestPoint:TestPoint_Pad_D1.0mm | TP27 |
| 1 | FLASH_CLK | TestPoint:TestPoint_Pad_D1.0mm | TP29 |
The 259 most common of 335 parts.
More from esden/squishy-hardware
10- 8 layers245 × 129 mm

- 6 layers75 × 55 mm

- 4 layers85 × 85 mm

- 4 layers121.4 × 109.4 mm

- 6 layers75 × 55 mm

- 6 layers75 × 55 mm

- 6 layers75 × 34 mm

- 6 layers75 × 34 mm

- 6 layers75 × 34 mm

- 6 layers75 × 34 mm

Similar boards
- 14 layers55 × 40 mm

Polarfire som
antmicro/polarfire-som
System on Module based on Microchip PolarFire MPFS250T SoC
473 parts48Apache-2.0 - 4 layers100 × 70 mm

- 4 layers45.5 × 52 mm

- 4 layers160 × 90 mm

- 6 layers450 × 235 mm

Baseline
DeadlySIn777/Controller
Unfinished CNC controller motherboard: native KiCad sources, rules, DSN and global routing review
2,723 parts - 4 layers188.3 × 49.3 mm

Sound Sensor Teensy Carrier
forrestrae/teensy-sound-sensor-pcb
A KiCad 9.0 carrier board for the Teensy 4.x microcontroller, designed for real-time audio sensing with USB-C Power Delivery input, 4S Li-ion battery management, I2S MEMS microphone, and LED lighting outputs.
257 partsApache-2.0 - 6 layers108 × 158.8 mm

Gk pcbv3
jncronin/gk
This respository provides PCB schematics, firmware and debugging support for the gkv4 handheld game console and its operating system, gkos. For the original STM32H7S7-based gk, see README-v3.md.
289 parts79 - 4 layers90 × 65 mm

Final chain
misko/prompt2device
The separate vNext PCB skill and orchestrator package is available alongside the reference workflow below; existing projects keep their accepted toolchain until an explicit migration.
37 parts3MIT
Questions
How big is the Squishy main PCB?
It measures 75 × 115 mm and has 8 copper layers, 1.62 mm thick.
What parts does the Squishy main use?
335 parts, built around the ATSAMD09D14A-MU, AP3428DNTR-G1, S80KS5122GABHI020 and TPD4E02B04DQAR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Squishy main KiCad files?
From the esden/squishy-hardware repository on GitHub, at the commit this page was made from: the board is boards/squishy/main-unit/squishy-main.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Squishy main design in my own project?
Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).