

Fimur electrical v0-2
Exploration in IMU sensor fusion
- Size
- 73 × 47.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 36
- Nets
- 53
- Pads
- 149
- Tracks, vias
- 326, 15
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 24 Dec 2025
- Updated
- 10 Sep 2026
Overview
Fimur electrical v0-2 is an open-source printed circuit board by eriklovekin, from the eriklovekin/fimur repository on GitHub. It is a 2-layer board of 73 × 47.5 mm with 36 parts on 53 nets, routed with 326 tracks and 15 vias.
It is built around the XY-SM04B-SRSS-TB, HC-PZ254-11.5L-1X3PZ and 2541FV-16P-B, with the HC-PZ254-11.5L-1X2PZ among its other parts. Its parts include 16 connectors, 3 resistors and 1 IC. It belongs with the sensors and measurement boards of this library.
Main components
4XY-SM04B-SRSS-TB
SMD,P=1mm,卧贴-25℃~+85℃ 1 1A 1mm 1x4P 4 4P 50V Brass LCP Surface Mount, Right Angle Tin UL94V-0 SMD,P=1mm,卧贴 Wire To Board Connector ROHSXYECONNWire To Board ConnectorHC-PZ254-11.5L-1X3PZ
插件,P=2.54mmPin HeadersHong Cheng2541FV-16P-B
插件,P=2.54mmFemale HeadersHanElectricityHC-PZ254-11.5L-1X2PZ
插件,P=2.54mmPin HeadersHong Cheng
README
README.mdFused Inertial Measurement Unit aRray (FIMUR)
Can the performance of high-cost IMUs be matched through the fusion of a large array of MEMS IMUs?
Coordinate Frames
Sensor (S)
The S frame is the frame in which the sensor outputs measurements.
Filter (F)
The F frame is the frame in which the output of the filter is represented. The origin and orientation of each IMU must be initialized in this frame. Origin: position of the S origin of the IMU as (x_F, y_F, z_F) Rotation: Direction cosine matrix from IMU S frame to F frame
Wake (W)
The W frame is an inertial frame colocated with the F frame at filter startup (wake). It does not move with the sensor, and is the frame in which position estimates are represented.
ENU (L)
The ENU frame is an inertial frame with origin colocated with the Filter frame origin.
Filters
1: Intuitive Filter
Naive filter that implements my intuition about how a filter should work
Figure 1: Flow diagram of Intuitive Filter
Dependencies
Python
Running with python 3.12.3
Ensure the following libraries are installed using pip install <library>
- serial
- pyserial
- pandas
- numpy
- pyqtgraph
- pyside6
- allantools
PyQt
sudo apt updatesudo apt install libxcb-cursor0
References
1 Interactive Kalman Filter Tutorial
3 Sarabandi, S; Thomas, F - Accurate Computation of Quaternions from Rotation Matrices
Parts
36| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | XY-SM04B-SRSS-TB | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J6, J7, J8, J9, J10, J11, J12, J13, J14, J15 |
| 3 | 10k | Resistor_SMD:R_1206_3216Metric | R1, R2, R3 |
| 3 | HC-PZ254-11.5L-1x3PZ | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3, J4, J5 |
| 2 | 2541FV-16P-B | Connector_PinSocket_2.54mm:PinSocket_1x16_P2.54mm_Vertical | J1, J2 |
| 2 | TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TestPoint:TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | GND, VCC |
| 1 | HC-PZ254-11.5L-1x2PZ | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J16 |
| 1 | TCA9548APWR | Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm | U1 |
The 22 most common of 36 parts.
More from eriklovekin/fimur
1- 2 layers47 × 27 mm

Similar boards
- 2 layers229.7 × 135.6 mm

Morse mesh v2
eihli/morse-mesh
This is the current hardware source for future Morse Mesh revisions. It is a professionally reviewed redraw of the frozen, fabricated v1 board, not a pin-compatible replacement: notably, KEYIN moved from v1 PA0 to v2…
75 parts1 - 2 layers65 × 17 mm

Silkscreen light attachment
iandchasse/silkscreen-light-attachment
Clip-on warm/cool reading light for the Silkscreen e-reader; plugs into the main board's expansion header through the top of the stock 4.26in case
16 partsCERN-OHL-S-2.0 - 2 layers65 × 30 mm

Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
36 parts1kGPL-3.0 - 2 layers55 × 70 mm

Arduino v1
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
36 parts915 - 2 layers50.4 × 24.8 mm

- 2 layers45.7 × 31.8 mm

LEDx16 board
tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!
36 parts803MIT - 2 layers32 × 24 mm

- 2 layers69 × 53.8 mm

TUSS4470 shield
Neumi/open_echo
Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.
36 parts530
Questions
How big is the Fimur electrical v0-2 PCB?
It measures 73 × 47.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Fimur electrical v0-2 use?
36 parts, built around the XY-SM04B-SRSS-TB, HC-PZ254-11.5L-1X3PZ, 2541FV-16P-B and HC-PZ254-11.5L-1X2PZ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Fimur electrical v0-2 KiCad files?
From the eriklovekin/fimur repository on GitHub, at the commit this page was made from: the board is electrical/v0/v0-2/fimur-electrical-v0-2.kicad_pcb and its schematic electrical/v0/v0-1/fimur-electrical-v0-1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Fimur electrical v0-2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask eriklovekin before reusing the design.