2 layers171.5 × 110.5 mm
Schems
ErickCampos/At-Switch
This repo describes the construction of non-conventional AT switches: - Proximity-based, through IR LEDs and IR Sensors - Puff-based, through piezoelectric disc sensors
96 parts1GPL-3.0
2 layers134.6 × 91.4 mm
Status
ErickCampos/At-Switch1This repo describes the construction of non-conventional AT switches: - Proximity-based, through IR LEDs and IR Sensors - Puff-based, through piezoelectric disc sensors
- Size
- 134.6 × 91.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 56
- Nets
- 7
- Pads
- 128
- Tracks, vias
- 200, 0
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 27 Feb 2018
- Updated
- 30 Jul 2018
Overview
Status is an open-source printed circuit board by ErickCampos, from the ErickCampos/At-Switch repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 134.6 × 91.4 mm with 56 parts on 7 nets, routed with 200 tracks and 0 vias.
Its parts include 24 resistors, 24 diodes and 8 connectors.
README
README.mdAT Switch
This repo describes the construction of non-conventional AT switches:
- Proximity-based, through IR LEDs and IR Sensors
- Puff-based, through piezoelectric disc sensors
The devices can act as independent triggers, and a minimal desktop driver, called JATSD (Jack AT Switch Driver) allow them to be used as a 'mouse click' interface, which communicates with the computer directly via audio P2 3.5mm jack input.
Dependences (Debian)
sudo apt-get install kicad libx11-dev libasound2-dev libportaudio-dev portaudio19-devCopyright
2017-2018
FalaBrasil Group (github|webpage)
Laboratory of Visualization, Interaction and Intelligent Systems (LabVIS)
Federal University of Pará (UFPA)
Authors
Erick Modesto Campos (github|email)
Cassio Trindade Batista (github|email)
Parts
56| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | LED | LED-5MM | D1, D1, D1, D1, D1, D1, D1, D1, D2, D2, D2, D2, D2, D2, D2, D2 +8 |
| 24 | R | R4 | R1, R1, R1, R1, R1, R1, R1, R1, R2, R2, R2, R2, R2, R2, R2, R2 +8 |
| 8 | CONN_4 | PIN_ARRAY_4x1 | P1, P1, P1, P1, P1, P1, P1, P1 |
Questions
How big is the Status PCB?
It measures 134.6 × 91.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Status use?
56 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Status KiCad files?
From the ErickCampos/At-Switch repository on GitHub, at the commit this page was made from: the board is at-prox/schems/status-led/Status.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Status design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from ErickCampos/At-Switch
4- 2 layers230.6 × 112 mm
Schems
ErickCampos/At-Switch
This repo describes the construction of non-conventional AT switches: - Proximity-based, through IR LEDs and IR Sensors - Puff-based, through piezoelectric disc sensors
96 parts1GPL-3.0 - 2 layers216 × 118.6 mm
Blow
ErickCampos/At-Switch
This repo describes the construction of non-conventional AT switches: - Proximity-based, through IR LEDs and IR Sensors - Puff-based, through piezoelectric disc sensors
72 parts1GPL-3.0 - 2 layers115.6 × 57.2 mm
Emissor
ErickCampos/At-Switch
This repo describes the construction of non-conventional AT switches: - Proximity-based, through IR LEDs and IR Sensors - Puff-based, through piezoelectric disc sensors
40 parts1GPL-3.0
Similar boards
- 2 layers90 × 38 mm
LCD OLinuXino-5TS Rev.B
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
56 parts1.5k - 2 layers50.4 × 48.4 mm
Distortion
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
56 parts915 - 2 layers27 × 24.7 mm
- 2 layers123.9 × 94.4 mm
- 2 layers120.6 × 85.5 mm
KLOTZ
GEIGEIGEIST/KLOTZ
KLOTZ is 34 keys column-staggered split keyboard. It uses an encoder and three status LEDs on each side.
56 parts287GPL-3.0 - 2 layers136 × 91.7 mm
One
ergonautkb/one
Ergonaut One is an open-source ergonomic wireless split mechanical keyboard designed by Ergonaut Keyboards.
56 parts210CERN-OHL-P-2.0 - 2 layers78.5 × 69 mm
Kicad cpu board
matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer
56 parts171 - 2 layers45 × 45 mm
Aeroq Hardware v3
EnriqueNeyra/Aeroq
An Indoor Air Quality Monitor Powered by ESP32, SCD40, and SEN54
56 parts130