
Cross connector
erichstuder/Light_Installation
This is a research project do investigate MBSE (Model Based System Engineering) and a more classical textual approach. Both approaches are applied in parallel.

This is a research project do investigate MBSE (Model Based System Engineering) and a more classical textual approach. Both approaches are applied in parallel.
Led connector is an open-source printed circuit board by erichstuder, from the erichstuder/Light_Installation repository on GitHub, published under the AGPL-3.0 licence. It is a 2-layer board of 450 × 40 mm with 20 parts on 12 nets, routed with 64 tracks and 26 vias.
It is built around the TSM-105-03-T-DV. Its parts include 10 resistors and 6 connectors.
This is a research project do investigate MBSE (Model Based System Engineering) and a more classical textual approach. Both approaches are applied in parallel.
see online documentation: https://erichstuder.github.io/Light_Installation/
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 0 | Resistor_SMD:R_0805_2012Metric | R1, R3, R5, R7, R9 |
| 5 | Conn_01x03 | Wuerth:691508110303 | J1, J2, J3, J4, J5 |
| 5 | ∞ | Resistor_SMD:R_0805_2012Metric | R2, R4, R6, R8, R10 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 1 | TSM-105-03-T-DV | TSM-105-03-T-DV:SAMTEC_TSM-105-03-T-DV | J6 |

erichstuder/Light_Installation
This is a research project do investigate MBSE (Model Based System Engineering) and a more classical textual approach. Both approaches are applied in parallel.



atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️

davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

FreeYourStream/freedeck-hardware
all the stuff you need to build your own FreeDeck
It measures 450 × 40 mm and has 2 copper layers, 1.6 mm thick.
20 parts, built around the TSM-105-03-T-DV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the erichstuder/Light_Installation repository on GitHub, at the commit this page was made from: the board is Shared/electronics/led_connector/led_connector.kicad_pcb and its schematic Shared/electronics/cross_connector/cross_connector.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the AGPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).