2 layers450 × 40 mm
Led connector
erichstuder/Light_Installation
This is a research project do investigate MBSE (Model Based System Engineering) and a more classical textual approach. Both approaches are applied in parallel.
20 partsAGPL-3.0
2 layers450 × 102.1 mm
Cross connector
erichstuder/Light_InstallationThis is a research project do investigate MBSE (Model Based System Engineering) and a more classical textual approach. Both approaches are applied in parallel.
- Size
- 450 × 102.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 32
- Nets
- 109
- Pads
- 203
- Tracks, vias
- 240, 10
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 19 Sep 2022
- Updated
- 16 Nov 2024
Overview
Cross connector is an open-source printed circuit board by erichstuder, from the erichstuder/Light_Installation repository on GitHub, published under the AGPL-3.0 licence. It is a 2-layer board of 450 × 102.1 mm with 32 parts on 109 nets, routed with 240 tracks and 10 vias.
Its parts include 25 resistors and 6 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
README
README.mdLight_Installation
This is a research project do investigate MBSE (Model Based System Engineering) and a more classical textual approach. Both approaches are applied in parallel.
see online documentation: https://erichstuder.github.io/Light_Installation/
Parts
32| Qty | Value | Footprint | References |
|---|---|---|---|
| 25 | 0 | Resistor_SMD:R_0805_2012Metric | R1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23 +9 |
| 5 | Conn_02x05_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x05_P2.54mm_Vertical | J1, J2, J3, J4, J5 |
| 1 | Arduino_Mega2560_Shield | arduino-library:Arduino_Mega2560_Shield | XA1 |
| 1 | Conn_01x03 | Wuerth:691508110303 | J6 |
More from erichstuder/Light_Installation
1Similar boards
- 2 layers50 × 23.2 mm
Analog
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
32 parts1kGPL-3.0 - 2 layers136.8 × 54.2 mm
Retropie zero
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
32 parts915 - 2 layers
- 2 layers16 × 20 mm
ESPKey
octosavvi/ESPKey
Wiegand data logger, replay device and micro door-controller
32 parts353GPL-2.0 - 2 layers82 × 40.9 mm
Display7447
zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube
32 parts269 - 2 layers40 × 38 mm
Shield
murexrobotics/electrical
Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.
32 parts192MIT - 2 layers47 × 39 mm
Qrss clock tx
swharden/AVR-projects
A collection of standalone AVR projects written in C
32 parts184MIT - 2 layers30.9 × 63 mm
Stm32-io extend
hardenedlinux/cheap-pcb
Cheap PCB: Better understanding the current status of hardware supply chain
32 parts170CC0-1.0
Questions
How big is the Cross connector PCB?
It measures 450 × 102.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Cross connector use?
32 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Cross connector KiCad files?
From the erichstuder/Light_Installation repository on GitHub, at the commit this page was made from: the board is Shared/electronics/cross_connector/cross_connector.kicad_pcb and its schematic Shared/electronics/cross_connector/cross_connector.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Cross connector design in my own project?
Its repository publishes it under the AGPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).