2 layers140.5 × 30 mm
Type e
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
16 parts3kApache-2.0
2 layers
Automatic sampler logic
eric5512/Automatic-sampler- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 16
- Nets
- 72
- Pads
- 187
- Tracks, vias
- 181, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 6 Sep 2023
- Updated
- 4 Sep 2024
Overview
Automatic sampler logic is an open-source printed circuit board by eric5512, from the eric5512/Automatic-sampler repository on GitHub, published under the MIT licence. It is a 2-layer board with 16 parts on 72 nets, routed with 181 tracks and 0 vias.
Its parts include 6 connectors, 2 capacitors, 2 ICs, 1 resistor and 1 diode. It belongs with the RP2040 boards of this library.
README
README.mdAutomatic-sampler
Parts
16| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Pololu_Breakout_DRV8825 | Module:Pololu_Breakout-16_15.2x20.3mm | A1, A2, A3, A4 |
| 1 | 0.1u | Capacitor_THT:C_Disc_D6.0mm_W2.5mm_P5.00mm | C2 |
| 1 | 0.33u | Capacitor_THT:C_Disc_D6.0mm_W2.5mm_P5.00mm | C1 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | FinalSock | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J5 |
| 1 | LED | LED_THT:LED_D5.0mm | D1 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U5 |
| 1 | MOT_X_SOCK_1 | Connector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J2 |
| 1 | MOT_X_SOCK_2 | Connector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J1 |
| 1 | MOT_Y_SOCK | Connector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J3 |
| 1 | MOT_Z_SOCK | Connector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J6 |
| 1 | Pico | MCU_RaspberryPi_and_Boards:RPi_Pico_SMD_TH | U4 |
| 1 | Power | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J4 |
Questions
What parts does the Automatic sampler logic use?
16 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Automatic sampler logic KiCad files?
From the eric5512/Automatic-sampler repository on GitHub, at the commit this page was made from: the board is Schematics/Electronics/Automatic_sampler_logic/Automatic_sampler_logic.kicad_pcb and its schematic Schematics/Electronics/Automatic_sampler.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Automatic sampler logic design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers41.4 × 14.5 mm
U2f zero
conorpp/u2f-zero
U2F USB token optimized for physical security, affordability, and style
16 parts2.4k - 2 layers77.5 × 33.7 mm
Breakout 72pin 1123038-2-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
16 parts1.2k - 2 layers122 × 37 mm
V0-UmbilicalBoard
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
16 parts1.1kGPL-3.0 - 2 layers152 × 57.6 mm
Videoslotadapter
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
16 parts1kGPL-3.0 - 2 layers36 × 63.4 mm
Smart ringfinal layout
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
16 parts915 - 2 layers60 × 40 mm
- 2 layers21.1 × 26.9 mm
