Skip to the content
2 layers30 × 22.9 mmGyroscope breakout, the printed circuit board in 3D

Gyroscope breakout

ERFSEDS/common_modules2

These are the common modules that are to be used for various projects and boards

Size
30 × 22.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
5
Nets
11
Pads
36
Tracks, vias
93, 7
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
1 Jun 2020
Updated
4 Mar 2022

Overview

Gyroscope breakout is an open-source printed circuit board by ERFSEDS, from the ERFSEDS/common_modules repository on GitHub. It is a 2-layer board of 30 × 22.9 mm with 5 parts on 11 nets, routed with 93 tracks and 7 vias.

It is built around the BMI088. Its parts include 2 capacitors and 1 IC. It belongs with the interfaces and adapters boards of this library.

Main components

1

README

README.md

common_modules

hi

Parts

5
QtyValueFootprintReferences
2100nFGyroscope:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC101, C102
2Conn_01x08Gyroscope:PinHeader_1x08_P2.54mm_Verticale101, J101
1BMI088Gyroscope:16-LGA-(4.5x3)IC101

More from ERFSEDS/common_modules

8
  • 2 layers70 × 60 mmNOVA MCU (STM), the printed circuit board in 3D

    NOVA MCU (STM)

    ERFSEDS/common_modules

    These are the common modules that are to be used for various projects and boards

    44 parts2
  • 2 layers43.2 × 49.8 mmPyro Breakout, the printed circuit board in 3D

    Pyro Breakout

    ERFSEDS/common_modules

    These are the common modules that are to be used for various projects and boards

    18 parts2
  • 2 layersFTDI breakout, the printed circuit board in 3D

    FTDI breakout

    ERFSEDS/common_modules

    These are the common modules that are to be used for various projects and boards

    15 parts2
  • 2 layers34.3 × 45.8 mmVRB, the printed circuit board in 3D

    VRB

    ERFSEDS/common_modules

    These are the common modules that are to be used for various projects and boards

    13 parts2
  • 2 layers36.5 × 38.5 mmLAMBDA HAT, the printed circuit board in 3D

    LAMBDA HAT

    ERFSEDS/common_modules

    These are the common modules that are to be used for various projects and boards

    6 parts2
  • 2 layers13.5 × 13.5 mmAccelerometer Breakout, the printed circuit board in 3D

    Accelerometer Breakout

    ERFSEDS/common_modules

    These are the common modules that are to be used for various projects and boards

    5 parts2
  • 2 layers27.9 × 25.8 mmFlash SD Board, the printed circuit board in 3D

    Flash SD Board

    ERFSEDS/common_modules

    These are the common modules that are to be used for various projects and boards

    5 parts2
  • 2 layers19 × 17 mmBarometer Board, the printed circuit board in 3D

    Barometer Board

    ERFSEDS/common_modules

    These are the common modules that are to be used for various projects and boards

    3 parts2

Similar boards

  • 4 layers100.1 × 60.2 mmHades, the printed circuit board in 3D

    Hades

    pms67/HadesFCS

    Complete flight control system designed from scratch. Hardware designed with KiCad.

    215 parts1kBSD-3-Clause
  • 4 layers55 × 55 mmRBoard, the printed circuit board in 3D

    RBoard

    pms67/LittleBrain-STM32F4-Sensorboard

    STM32F4-based PCB interfacing with a variety of sensors.

    90 parts339
  • 8 layers50 × 50 mmOmodri laas, the printed circuit board in 3D

    Omodri laas

    open-dynamic-robot-initiative/open-motor-driver-initiative

    Open-source drive for brushless motors, following the open dynamic robot initiative

    265 parts122BSD-3-Clause
  • 4 layers99.8 × 94.6 mmOresat adcs card, the printed circuit board in 3D

    Oresat adcs card

    oresat/oresat-adcs-hardware

    Controller PCB for OreSat reaction wheels, magnetorquers, IMU, and magnetometers

    598 parts21GPL-2.0
  • 4 layers70.1 × 50.9 mmFlight computer, the printed circuit board in 3D

    Flight computer

    Terrapin-Rocket-Team/SRAD-Avionics

    Code and PCBs for the avionics subteam for the SRAD flight computer and side projects

    121 parts17
  • 4 layers62.8 × 97.5 mmOceanAI, the printed circuit board in 3D

    OceanAI

    daniel360kim/OceanAI

    A robotic and software orientated ocean development.

    124 parts14MIT
  • 4 layers30.5 × 82.6 mmCircuit board design, the printed circuit board in 3D

    Circuit board design

    ImperialSpaceSociety/Project-Mach-1

    This is the code and hardware designs for the high powered rocketry project at the Imperial College Space Society

    89 parts12
  • 4 layers64 × 60 mmDronemagnav, the printed circuit board in 3D

    Dronemagnav

    ajisrawi/dronemagnav

    Magnetic-anomaly navigation (MagNav) board + firmware for drones: ESP32-S3, BMI088, LIS3MDL, BMP280, u-blox GNSS, WDMAM map matching, particle filter, MAVLink, phone route planner. Proprietary - all rights reserved.

    60 parts11

Questions

How big is the Gyroscope breakout PCB?

It measures 30 × 22.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Gyroscope breakout use?

5 parts, built around the BMI088. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Gyroscope breakout KiCad files?

From the ERFSEDS/common_modules repository on GitHub, at the commit this page was made from: the board is Gyroscope/breakout/Gyroscope_breakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Gyroscope breakout design in my own project?

Its repository states no licence, so its author keeps all rights: ask ERFSEDS before reusing the design.