2 layers133.9 × 76.2 mm
2 layers275.5 × 123.8 mm
Keyboard
eravas/column-splita columnar, split, tkl keyboard
- Size
- 275.5 × 123.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 125
- Nets
- 81
- Pads
- 493
- Tracks, vias
- 590, 37
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 6 Mar 2022
- Updated
- 6 Mar 2022
Overview
Keyboard is an open-source printed circuit board by eravas, from the eravas/column-split repository on GitHub. It is a 2-layer board of 275.5 × 123.8 mm with 125 parts on 81 nets, routed with 590 tracks and 37 vias.
Its parts include 5 connectors, 2 resistors and 2 ICs. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.
README
README.mdcolumn-split
a columnar, split, tkl keyboard
Parts
125| Qty | Value | Footprint | References |
|---|---|---|---|
| 43 | D | Diode_SMD:D_SOD-123 | D_1, D_2, D_10, D_11, D_12, D_13, D_14, D_15, D_16, D_17, D_18, D_19, D_20, D_21, D_22, D_23 +27 |
| 33 | KEYSW | MX_Only:MXOnly-1U-Hotswap | K_2, K_10, K_11, K_12, K_14, K_15, K_16, K_17, K_18, K_19, K_21, K_22, K_23, K_24, K_25, K_26 +17 |
| 30 | MountingHole_2.2mm_M2 | MountingHole:MountingHole_2.2mm_M2 | REF1, REF2, REF10, REF11, REF12, REF13, REF14, REF15, REF16, REF17, REF18, REF19, REF20, REF21, REF22, REF23 +14 |
| 8 | KEYSW | MX_Only:MXOnly-1.5U-Hotswap | K_7, K_13, K_20, K_27, K_35, K_36, K_37, K_38 |
| 3 | Conn_01x03_Female | Connector_PinSocket_2.00mm:PinSocket_1x03_P2.00mm_Vertical | J1, J2, J3 |
| 2 | 1k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R0, R1 |
| 2 | Conn_01x08_Female | Connector_Molex:Molex_Pico-Clasp_202396-0807_1x08-1MP_P1.00mm_Horizontal | J5, J6 |
| 2 | KEYSW | MX_Only:MXOnly-2U-Hotswap | K_1, K_29 |
| 1 | Elite-C | Keebio-Parts:Elite-C | U0 |
| 1 | TRRS | Keebio-Parts:TRRS-PJ-320A | U1 |
Questions
How big is the Keyboard PCB?
It measures 275.5 × 123.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Keyboard use?
125 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Keyboard KiCad files?
From the eravas/column-split repository on GitHub, at the commit this page was made from: the board is KiCad Project Folders/layout_right/keyboard.kicad_pcb and its schematic KiCad Project Folders/layout_left/keyboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Keyboard design in my own project?
Its repository states no licence, so its author keeps all rights: ask eravas before reusing the design.
Similar boards
- 2 layers139.1 × 107.7 mm
Lotus58 Glow 130
TweetyDaBird/Lotus-58-Classic
A split ergo linear keyboard derived from the Lily58 family
125 parts390 - 2 layers98 × 128 mm
- 2 layers281 × 76.2 mm
Treadstone48
marksard/Keyboards
This repository is warehouse of my keyboard architecture.
125 parts193MIT - 2 layers20 × 110 mm
- 2 layers85 × 100 mm
Feeder Panelized
RinthLabs/MaxFeeder
Arduino Mega shield for controlling part feeders for Open PNP
125 parts36MIT - 2 layers148.8 × 132.2 mm
Usbflashprog
robsonsmartins/usbflashprog
A memory device programmer (Flash/EPROM/E2PROM) board and software, connected to PC by USB port.
125 parts36 - 2 layers89.8 × 10.2 mm
