

MECB 68008 CPU
- Size
- 99.8 × 99.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 90
- Pads
- 278
- Tracks, vias
- 1,355, 126
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 2 Jul 2024
- Updated
- 25 Oct 2026
Overview
MECB 68008 CPU is an open-source printed circuit board by epaell, from the epaell/MECB repository on GitHub. It is a 2-layer board of 99.8 × 99.8 mm with 23 parts on 90 nets, routed with 1,355 tracks and 126 vias.
It is built around the ATF22V10C-15PU, AS6C4008-55PCN and TC1232CPA. Its parts include 6 capacitors, 6 ICs, 1 resistor, 1 connector and 1 switch. It belongs with the FPGA and CPLD boards of this library.
Main components
3ATF22V10C-15PU
PDIP-245V EEPLD PDIP-24 Programmable Logic Device (CPLDs/FPGAs) ROHSMicrochip TechnologyProgrammable Logic Device (CPLDs/FPGAs)AS6C4008-55PCN
PDIP-320℃~+70℃ 2.7V~5.5V 30mA 4Mbit 4uA 55ns Parallel Port (Parallel) PDIP-32 SRAM ROHSAlliance MemorySRAMTC1232CPA
PDIP-8-40℃~+85℃@(Ta) 1 250ms 4.62V 4V~5.5V Active Low Open-drain、Push-pull Voltage monitor Watchdog timer、Manual reset input PDIP-8 Supervisor and Reset ICs ROHSMicrochip TechnologySupervisor And Reset ICs
README
SDCardShield/README.mdSDCardShield
A version of the SD Card shield that was originally developed by Corsham Technologies for the SWTPC. It has been modified to work with the MECB I/O board (PIA port) and makes use of Adafruit modules to implement the realtime clock:
https://core-electronics.com.au/adafruit-ds3231-precision-rtc-breakout.html
and microSD interface:
https://core-electronics.com.au/microsd-card-breakout-board.html
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 0.1uF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C2, C3, C4, C5, C6 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 1 | 4K7 | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R1 |
| 1 | 8 MHz | Package_DIP:DIP-4-8_W7.62mm_Socket_LongPads | Y1 |
| 1 | AS6C4008-55 | Package_DIP:DIP-32_W15.24mm_Socket_LongPads | U6 |
| 1 | ATF22V10C-15PU | MyCustomFootprintLibrary:DIP-24_W7.62mm_Socket_LongPads_ZIF_Friendly | U1 |
| 1 | GAL22V10 | Package_DIP:DIP-24_W7.62mm_Socket_LongPads | U5 |
| 1 | Jumper_2_Open | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | Jumper_3_Open | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP2 |
| 1 | MC68008FN | Package_LCC:PLCC-52_THT-Socket | U3 |
| 1 | MECB_64AC | MyCustomFootprintLibrary:DIN41612_C_2x32_C64AC_Male_Horizontal_THT | J1 |
| 1 | R_Network08_US | Resistor_THT:R_Array_SIP9 | RN1 |
| 1 | SST39SF040 | Package_DIP:DIP-32_W15.24mm_Socket_LongPads | U2 |
| 1 | SW_DIP_PB | Button_Switch_THT:SW_Tactile_Straight_KSA0Axx1LFTR | SW1 |
| 1 | TC1232CPA | Package_DIP:DIP-8_W7.62mm_Socket_LongPads | U4 |
More from epaell/MECB
10- 2 layers99.8 × 99.8 mm

- 2 layers99.8 × 99.8 mm

- 2 layers99.8 × 99.8 mm

- 2 layers99.8 × 99.8 mm

- 2 layers139.8 × 53.3 mm

- 2 layers99.8 × 99.8 mm

- 2 layers99.8 × 99.8 mm

- 2 layers99.8 × 99.8 mm

- 2 layers99.8 × 99.8 mm

- 2 layers80 × 67.5 mm

Similar boards
- 4 layers273 × 178 mm

Pico thing
markrvmurray/pico-thing
An 8-bit MC6809E / HD6309E single-board computer with a pair of Raspberry Pi Pico 2 (RP2350 / Pimoroni PGA2350) modules acting as intelligent bus peripherals, a 1–2 MB banked-RAM DAT/MMU, a 40-pin PATA hard-disk…
206 parts1BSD-2-Clause - 4 layers160 × 100 mm

- 2 layers65.7 × 63 mm

Msx printer interface
tangent3D/msx_printer_interface
Low-cost printer cartridge for MSX models and FPGA implementations that do not feature a standard printer port
11 parts - 6 layers243.8 × 243.8 mm

Raven
agranlund/raven
Homemade MC68060 + DSP56303 Atari-compatible computer. Hardware, firmware, and software stack
237 parts87 - 2 layers99.8 × 99.8 mm

MECB Template 22V10
DigicoolThings/MECB
Minimalist Europe Card Bus (MECB). An 8-bit Retro Computing Modular System Bus for 8-bit Retro Enthusiast Experimentation.
7 parts24 - 6 layers160 × 70 mm

- 2 layers125 × 98 mm

3-in-1
mudmin/AnotherMaker
This is where I will store code snippets for AnotherMaker Videos
44 parts258 - 4 layers160 × 100 mm

Rosco m68k
rosco-m68k/rosco_m68k
Design, documentation and software for the Really Old School Computer (M68K)
140 parts200
Questions
How big is the MECB 68008 CPU PCB?
It measures 99.8 × 99.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MECB 68008 CPU use?
23 parts, built around the ATF22V10C-15PU, AS6C4008-55PCN and TC1232CPA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MECB 68008 CPU KiCad files?
From the epaell/MECB repository on GitHub, at the commit this page was made from: the board is MECB_68008/MECB_68008_CPU.kicad_pcb and its schematic 68008Tester/68008test.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MECB 68008 CPU design in my own project?
Its repository states no licence, so its author keeps all rights: ask epaell before reusing the design.