
Ai robot hardware
robot-uprising-hq/ai-robot-hardware
Micro Invaders: robots' 3D-printing files and 3D-models

TheLightNing-2.0 is an open-source printed circuit board by EnzoBorrelli, from the EnzoBorrelli/TheLightNing-2.0 repository on GitHub. It is a 2-layer board of 70 × 50 mm with 25 parts on 45 nets, routed with 171 tracks and 0 vias.
It is built around the ESP32-DEVKITC-VE and L7805. Its parts include 8 diodes, 8 connectors, 5 capacitors, 3 ICs and 1 switch. It belongs with the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 1n4001 | EESTN5:DO-41 | D1, D2, D3, D4, D5, D6, D7, D8 |
| 2 | 100nF | EESTN5:CAP_0.1 | C3, C4 |
| 1 | 100uF 25v | EESTN5:CAP_ELEC_5x11mm | C2 |
| 1 | 10uF 16v | EESTN5:CAP_ELEC_5x11mm | C5 |
| 1 | 220uf | EESTN5:CAP_ELEC_5x11mm | C1 |
| 1 | ESP32_DEVKITC | EESTN5:ESP32S | U2 |
| 1 | L298(H)N | Package_TO_SOT_THT:TO-220-15_P2.54x2.54mm_StaggerEven_Lead4.58mm_Vertical | U1 |
| 1 | L7805 | EESTN5:TO-220 | U3 |
| 1 | LED_izq | EESTN5:Pin_Strip_3 | J4 |
| 1 | SW_SPDT | EESTN5:Pin_Strip_3 | SW1 |
| 1 | Sharp A | EESTN5:Pin_Strip_3 | J6 |
| 1 | Sharp B | EESTN5:Pin_Strip_3 | J7 |
| 1 | ampBuzz | EESTN5:Pin_Strip_3 | J8 |
| 1 | batt | EESTN5:Pin_Header_2 | J3 |
| 1 | motores der | EESTN5:pin_strip_4 | J2 |
| 1 | motores izq | EESTN5:pin_strip_4 | J1 |
| 1 | salida a modulo | EESTN5:pin_strip_4 | J5 |

robot-uprising-hq/ai-robot-hardware
Micro Invaders: robots' 3D-printing files and 3D-models

Sartalan/Spectrum-Messinalbot
Un robot controlado vía Bluetooth y Wifi (utilizando una aplicación web como control) pensado para jugar en la liga nacional de robótica.


EsqueletoArg/HexaProyecto
Un ajedrez de 3x3 casillas, donde se enfrentan 3 peones de ambos bandos para inmovilizar al rival o llegar al otro lado del tablero.




It measures 70 × 50 mm and has 2 copper layers, 1.6 mm thick.
25 parts, built around the ESP32-DEVKITC-VE and L7805. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the EnzoBorrelli/TheLightNing-2.0 repository on GitHub, at the commit this page was made from: the board is TheLightNing-2.0 PCB/TheLightNing 2.0.kicad_pcb and its schematic TheLightNing-2.0 PCB/TheLightNing 2.0.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask EnzoBorrelli before reusing the design.