2 layers47.6 × 27.3 mm
2 layers17.8 × 30.5 mm
EliteCSTM32F411
Envious-Data/EliteCSTM32F4112A STM32F411 board with the pinout of an Elite-C
- Size
- 17.8 × 30.5 mm
- Copper layers
- 2
- Thickness
- 1 mm
- Parts
- 27
- Nets
- 37
- Pads
- 167
- Tracks, vias
- 349, 29
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 12 Jan 2022
- Updated
- 12 Jan 2022
Overview
EliteCSTM32F411 is an open-source printed circuit board by Envious-Data, from the Envious-Data/EliteCSTM32F411 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 17.8 × 30.5 mm with 27 parts on 37 nets, routed with 349 tracks and 29 vias.
Its parts include 11 capacitors, 4 resistors, 3 ICs, 2 switches and 1 diode. It belongs with the STM32 and AVR (ATmega, ATtiny) boards of this library.
README
README.mdEliteCSTM32F411
A STM32F411 board with the pinout of an Elite-C
Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100nf capacitor | Capacitor_SMD:C_0402_1005Metric | C2, C3, C4, C5 |
| 4 | TestPoint | EnvExtras:CustomTestPoint | TP1, TP2, TP3, TP4 |
| 2 | 100nf 0402 | Capacitor_SMD:C_0402_1005Metric | C8, C9 |
| 2 | 1uf capacitor | Capacitor_SMD:C_0402_1005Metric | C6, C7 |
| 2 | 22pf capacitor | Capacitor_SMD:C_0402_1005Metric | C10, C11 |
| 2 | 5.1K 0402 | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 1 | 100k 0402 | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 10K 0402 | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 2.2uF 0402 | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | 8Mhz 3225 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | Boot Mode | Button_Switch_SMD:SW_SPST_B3U-1000P | SW1 |
| 1 | Elite-C | Keebio-Parts:Elite-C | U3 |
| 1 | General Purpose diode SOD-523 | Diode_SMD:D_SOD-523 | D1 |
| 1 | HRO-TYPE-C-31-M-14 | josh-connectors:USB_C_TYPE-C-31-M-14 | USB1 |
| 1 | Reset Switch | Button_Switch_SMD:SW_SPST_B3U-1000P | SW2 |
| 1 | STM32F411CEUx | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U1 |
| 1 | XC6206PxxxMR | Package_TO_SOT_SMD:SOT-23 | U2 |
Questions
How big is the EliteCSTM32F411 PCB?
It measures 17.8 × 30.5 mm and has 2 copper layers, 1 mm thick.
What parts does the EliteCSTM32F411 use?
27 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the EliteCSTM32F411 KiCad files?
From the Envious-Data/EliteCSTM32F411 repository on GitHub, at the commit this page was made from: the board is EliteCSTM32F411.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the EliteCSTM32F411 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers77.4 × 77.4 mm
CORAZON LEDS CON FADE
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
27 parts915 - 2 layers44.2 × 29.3 mm
- 2 layers40 × 40 mm
- 2 layers22 × 42 mm
Nvme bm to e
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
27 parts253GPL-3.0 - 2 layers80 × 61 mm
PicoProducer
pjgpetecodes/pico-streamdeck
This project is an OBS Controller using a Raspberry Pi Pico and CircuitPython.
27 parts230MIT - 2 layers186 × 45 mm
AddOnD
freeDSP/freeDSP-aurora
freeDSP ADAU1452 with 8 analog input, 8 analog outputs, S/P-DIF I/O, ADAT I/O, USB Audio Class2, WiFi, Bluetooth
27 parts226CC-BY-SA-4.0 - 2 layers29.6 × 40.6 mm
Dbwifi revB
ugcs/ddc
Drone Show Software is software designed for drone shows, allowing flight path planning as well as control of dozens of drones simultaneously in a synchronized manner.
27 parts223