

L298N (schematic and layout)
- Size
- 62.3 × 42.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 15
- Pads
- 66
- Tracks, vias
- 137, 5
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 15 Mar 2025
- Updated
- 16 Mar 2025
Overview
L298N is an open-source printed circuit board by engnourmo, from the engnourmo/L298N-PCB- repository on GitHub. It is a 2-layer board of 62.3 × 42.9 mm with 27 parts on 15 nets, routed with 137 tracks and 5 vias.
It is built around the L298N. Its parts include 9 diodes, 7 connectors, 2 capacitors, 2 ICs and 1 resistor.
Main components
1Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | D | Diode_SMD:D_PowerDI-123 | D2, D3, D4, D5, D6, D7, D8, D9 |
| 3 | MountingHole | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad | H1, H2, H3 |
| 2 | C_Polarized | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C1, C2 |
| 1 | 5V enable jumper | Connector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_Vertical | J1 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_1.27mm:PinHeader_1x04_P1.27mm_Vertical | J5 |
| 1 | EnableA | Connector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_Vertical | J3 |
| 1 | EnableB | Connector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_Vertical | J4 |
| 1 | Heatsink | heat sink:HSINK_SK_95_25_STS_TO_220 | HS1 |
| 1 | L298N | L298N:TO127P2020X500X2100-15 | U2 |
| 1 | LED | LED_SMD:LED_0201_0603Metric | D1 |
| 1 | LM7805_TO220 | voltage_regulator:TO254P1524X483-4N | U1 |
| 1 | LOGO | logos:Electronics | G*** |
| 1 | LOGO | logos:eagle | G*** |
| 1 | Motor1 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J6 |
| 1 | Motor2 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J7 |
| 1 | R | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | Screw_Terminal_01x03 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3_1x03_P5.00mm_Horizontal | J2 |
Similar boards
- 2 layers76.1 × 85 mm

- 4 layers85 × 54 mm

PECDR
pedro-ibs/trekking
Desenvolvimento de um robô rádio-controlado/autônomo da moralidade “tracker”
68 parts9 - 2 layers66.3 × 34.3 mm

C64PSUv3
FabioNMI/C64PSU
A low-cost, lightweight and very reliable power supply for the Commodore 64
37 parts2 - 2 layers

RoboForce
Khuzhin06/RoboForce
Тогда вы не зря зашли к нам, мы постараемся максимально подробно и быстро рассказать о нашем пути создания робота на ROS2 Jazzy и esp32,по этим материалам вы с легкостью сможете повторить этот проект.
3 parts2 - 2 layers

- 2 layers127 × 117.5 mm

Diy ert
CainPatel/diy-ert
A $150 four-electrode earth resistivity meter (Wenner array): Arduino, AD620, ADS1115. Documented failure-first as an engineering log.
44 parts1MIT - 2 layers99.5 × 99.5 mm

SchematicKiCadProyect
dduarteCE/Robot-vacuum
Embedded Linux robotic vacuum system built with Yocto on Raspberry Pi 4, featuring autonomous navigation, audio playback, and remote control through a web interface.
42 parts1MIT - 2 layers65 × 43.5 mm

Questions
How big is the L298N PCB?
It measures 62.3 × 42.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the L298N use?
27 parts, built around the L298N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the L298N KiCad files?
From the engnourmo/L298N-PCB- repository on GitHub, at the commit this page was made from: the board is L298N.kicad_pcb and its schematic L298N.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the L298N design in my own project?
Its repository states no licence, so its author keeps all rights: ask engnourmo before reusing the design.