Skip to the content
2 layers100 × 50 mmESP32-game console, the printed circuit board in 3D
Size
100 × 50 mm
Copper layers
2
Thickness
1.6 mm
Parts
71
Nets
73
Pads
296
Tracks, vias
668, 209
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
10 Aug 2026
Updated
30 Aug 2026

Parts

71
QtyValueFootprintReferences
510kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR17, R18, R19, R20, R23
40.1uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC10, C11, C12, C17
4100kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR8, R9, R10, R14
30kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR25, R26, R27
310uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC8, C9, C16
31KResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR7, R11, R16
31uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC13, C14, C15
35.1KResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR5, R21, R22
21kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR13, R15
222uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC6, C7
2SW_PushButton_Switch_SMD:SW_SPST_PTS645Sx43SMTR92Boot1, Reset1
10.1uFCapacitor_SMD:C_0805_2012MetricC5
11N5819Diode_THT:D_DO-41_SOD81_P10.16mm_HorizontalD5
1AButton_Switch_SMD:SW_SPST_PTS645Sx43SMTR92SW9
1BButton_Switch_SMD:SW_SPST_PTS645Sx43SMTR92SW10
1BAT+Connector_Wire:SolderWire-0.75sqmm_1x01_D1.25mm_OD3.5mmJ3
1BAT-Connector_Wire:SolderWire-0.75sqmm_1x01_D1.25mm_OD3.5mmJ4
1Conn_01x03_PinConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ8
1DOWNButton_Switch_SMD:SW_SPST_PTS645Sx43SMTR92SW8
1ESP32-S3-WROOM-1RF_Module:ESP32-S3-WROOM-1UU1
1Lenes:L-KLS7-TS3609-1.8-160-TSW11
1LEFTButton_Switch_SMD:SW_SPST_PTS645Sx43SMTR92SW1
1LF33_TO252Package_TO_SOT_SMD:TO-252-2U3
1LOGOenes:tuxG***
1LOGOenes:nintendoG***
1LOGOenes:espmicroqrG***
1LOGOenes:debianG***
1Micro_SD_CardConnector_Card:microSD_HC_Hirose_DM3AT-SF-PEJM5J2
1PAM8403DPackage_SO:SOIC-16_3.9x9.9mm_P1.27mmU6
1Renes:L-KLS7-TS3609-1.8-160-TSW12
1REDLED_THT:LED_D3.0mmD3
1RIGHTButton_Switch_SMD:SW_SPST_PTS645Sx43SMTR92SW2
1SELECTenes:L-KLS7-TS3609-1.8-160-TSW18
1STARTenes:L-KLS7-TS3609-1.8-160-TSW19
1SW_DPST_x2enes:L-KLS7-MSK-12C03SW13
1SpeakerTestPoint:TestPoint_2Pads_Pitch5.08mm_Drill1.3mmLS1
1TP4056-42-ESOP8Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm_ThermalViasU4
1TYPE-C-31-M-12enes:CONN12_C-31-M-12_HROJ1
1UPButton_Switch_SMD:SW_SPST_PTS645Sx43SMTR92SW7
1USBLC6-2SC6Package_TO_SOT_SMD:SOT-23-6U2
1~enes:ST7789VU5

The 64 most common of 71 parts.

Similar boards

  • 2 layers300 × 100 mmSynthesizer, the printed circuit board in 3D

    Synthesizer

    garvita4/synthesizer

    Snap-Synth is a custom-built modular synthesizer featuring mechanical keys, rotary encoders, per-key RGB lighting, and a custom-designed PCB, combining hands-on sound synthesis with an expandable hardware architecture.

    150 parts
  • 2 layers24.5 × 53.4 mmEsp32 bno085, the printed circuit board in 3D

    Esp32 bno085

    nemonamo/esp32_bno085

    ESP32 + BNO085 KiCad hardware design project

    39 parts
  • 2 layers80 × 34 mmDji fcc, the printed circuit board in 3D

    Dji fcc

    nikolaus018/dji-fcc-esp32

    ESP32-S3 firmware that switches a DJI N1 remote to FCC mode over USB (replaces the Android app)

    69 parts3MIT
  • 2 layers45 × 100 mmWalkiepcb, the printed circuit board in 3D

    Walkiepcb

    houseofthe051010/ESP32-Walkie-Talkie-V2

    This ESP32 Walkie Talkie is redesigned with a SX1262 radio, a PCB, and a full case redesign.

    93 parts1
  • 2 layers95 × 55 mmWifi geiger counter, the printed circuit board in 3D

    Wifi geiger counter

    atomicra1n/wifi-geiger-counter

    A DIY Geiger counter PCB which can detect ionizing radiation and log readings over Wi-Fi. Built with an ESP32, and a HV multiplier circuit that steps up 3.7V to 400V for the GM tube.

    64 parts
  • 4 layers50 × 50 mmEsp32c6-iot sensor node, the printed circuit board in 3D

    Esp32c6-iot sensor node

    nexicturbo/esp32c6-iot-sensor-node

    KiCad 8 ESP32-C6 environmental sensor node with BME280, SCD41, protected 18650 charging, and manufacturing outputs

    49 parts
  • 4 layers62 × 46.9 mm4LayerLabProject, the printed circuit board in 3D

    4LayerLabProject

    ZharbolatDinmukhamed/Haptic-Glove-PCB

    A wrist-mounted PCB for a haptic feedback glove, developed as part of my Research Assistantship at the Tactile Laboratory, Nazarbayev University.

    122 parts
  • 2 layers67.2 × 45.4 mmDev board, the printed circuit board in 3D

    Dev board

    rajeev2705/PROJECTS

    Welcome to my PCB projects repository! This space is dedicated to documenting my journey in designing, creating, and improving printed circuit boards (PCBs).

    120 parts

Questions

How big is the ESP32-game console PCB?

It measures 100 × 50 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ESP32-game console use?

71 parts, built around the ESP32-S3-WROOM-1-N8, PAM8403DR, TP4056-42-ESOP8 and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ESP32-game console KiCad files?

From the EnesOzdmir/ESP-micro-GAMEBOY repository on GitHub, at the commit this page was made from: the board is ESP32-game-console.kicad_pcb and its schematic ESP32-game-console.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the ESP32-game console design in my own project?

Its repository states no licence, so its author keeps all rights: ask EnesOzdmir before reusing the design.