Skip to the content
2 layers24.5 × 53.4 mmEsp32 bno085, the printed circuit board in 3D

ESP32 + BNO085 KiCad hardware design project

Size
24.5 × 53.4 mm
Copper layers
2
Thickness
1.58 mm
Parts
39
Nets
68
Pads
203
Tracks, vias
267, 98
Pours
2
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
26 Jun 2026
Updated
13 Jul 2026

Overview

Esp32 bno085 is an open-source printed circuit board by nemonamo, from the nemonamo/esp32_bno085 repository on GitHub. It is a 2-layer board of 24.5 × 53.4 mm with 39 parts on 68 nets, routed with 267 tracks and 98 vias.

It is built around the ESP32-S3-WROOM-1-N8, BNO085 and TP4056-42-ESOP8, with the XC6220B331MR-G, AO3401A and BAT760-7 among its other parts. Its parts include 11 capacitors, 11 resistors, 4 ICs, 4 diodes and 2 connectors. It belongs with the ESP32 boards of this library.

Main components

7

README

README.md

ESP32 BNO085

9축 모션 센싱을 위한 ESP32-S3 + BNO085 KiCad 하드웨어 설계.

KiCad MCU Sensor License

주요 특징 [blocked] | 구성 [blocked] | 열기 [blocked] | 제작 [blocked] | 라이선스 [blocked]

한국어 | English | 中文 | 日本語

이 저장소는 BNO085 9축 스마트 IMU를 중심으로 한 소형 ESP32-S3 보드의 KiCad 설계 파일을 담고 있습니다. 회로도, PCB 레이아웃, 로컬 풋프린트 라이브러리, fabrication-toolkit 설정은 버전 관리하고, 생성된 Gerber와 분석 결과는 Git에 포함하지 않습니다.

주요 특징

  • ESP32-S3 모듈 - Wi-Fi/BLE가 가능한 MCU 모듈 풋프린트.
  • BNO085 스마트 IMU - 가속도계, 자이로, 자력계, 센서 퓨전용 9축 센서.
  • USB-C 인터페이스 - USB 2.0 Type-C 리셉터클 기반 연결.
  • 로컬 풋프린트 포함 - BNO085와 Molex 커넥터 풋프린트를 저장소에 포함.
  • 제작 설정 버전 관리 - 반복 가능한 제조 파일 생성을 위한 fabrication-toolkit 설정 포함.

저장소 구성

text
esp32_bno085.kicad_pro          KiCad 프로젝트 파일
esp32_bno085.kicad_sch          회로도
esp32_bno085.kicad_pcb          PCB 레이아웃
fp-lib-table                    로컬 풋프린트 라이브러리 테이블
BNO085.pretty/                  BNO085 풋프린트
530480210.pretty/               Molex 커넥터 풋프린트
fabrication-toolkit-options.json

생성 파일은 제외합니다.

text
analysis/
production/
*-backups/
.history/
*.kicad_prl

프로젝트 열기

  1. KiCad 8 이상을 설치합니다.
  2. 저장소를 clone합니다.
  3. KiCad에서 esp32_bno085.kicad_pro를 엽니다.
  4. fp-lib-table 기준으로 로컬 풋프린트가 정상 연결되는지 확인합니다.
  5. 제조 파일을 내보내기 전에 ERC와 DRC를 실행합니다.
powershell
git clone https://github.com/nemonamo/esp32_bno085.git
cd esp32_bno085

제작 체크리스트

PCB 주문 전 확인할 항목:

  • esp32_bno085.kicad_sch에서 KiCad ERC 실행
  • esp32_bno085.kicad_pcb에서 KiCad DRC 실행
  • 현재 보드 기준으로 Gerber, drill, BOM, CPL 재내보내기
  • USB D+/D- clearance와 커넥터 방향 확인
  • BNO085 I2C pull-up과 전원 레일 확인
  • 제작 업체의 설계 규칙이 현재 PCB 제약과 맞는지 확인

이전 보드 리뷰에서는 JLCPCB 관련 copper geometry, 작은 via, USB D- clearance, silkscreen/text warning, BNO085 environmental I2C pull-up을 중점적으로 확인했습니다. 레이아웃을 바꿀 때마다 검사를 다시 실행하세요.

이 저장소가 아닌 것

  • 펌웨어는 포함하지 않습니다.
  • 생성된 production package는 포함하지 않습니다.
  • 최신 커밋이 그대로 제작 검증을 마쳤다고 보장하지 않습니다.

보안과 안전

하드웨어 저장소도 제작 압축 파일, 공급업체 export, 주문 파일, 스크린샷, 로컬 메모를 통해 개인 정보나 프로젝트 정보를 노출할 수 있습니다. production export와 분석 보고서는 검토 전까지 로컬에만 보관하세요.

라이선스

현재 오픈소스 하드웨어/소프트웨어 라이선스가 선언되어 있지 않습니다. 외부 재사용, 제작, 기여를 받기 전에 LICENSE 파일을 추가하세요.

Parts

39
QtyValueFootprintReferences
50.1uFCapacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderC5, C6, C7, C10, C11
410kResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR7, R9, R10, R11
410uFCapacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderC1, C2, C3, C4
3Fiducial_1mm_Mask2mmFiducial:Fiducial_1mm_Mask2mmFID1, FID2, FID3
21kResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR5, R6
222pFCapacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderC8, C9
25.1kResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR1, R2
11.2kResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR4
1100kResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR3
132.7680kHzCrystal:Crystal_SMD_3215-2Pin_3.2x1.5mmY1
1470Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR8
1530480210530480210:MOLEX_530480210J1
1AO3401APackage_TO_SOT_SMD:SOT-23Q1
1BAT760Diode_SMD:D_SOD-323D1
1BNO085BNO085:IC_BNO085U3
1BOOTButton_Switch_SMD:SW_SPST_B3U-1000PSW2
1BlueLED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolderD3
1ESP32-S3-WROOM-1RF_Module:ESP32-S3-WROOM-1U2
1LED_BLULED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolderD4
1OrangeLED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolderD2
1RESETButton_Switch_SMD:SW_SPST_B3U-1000PSW1
1TP4056-42-ESOP8Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm_ThermalViasU1
1USB_C_Receptacle_USB2.0_16PConnector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12J2
1XC6220B331MRPackage_TO_SOT_SMD:SOT-23-5U4

Similar boards

  • 4 layers49 × 42 mmEsp-32-s3-wroom-1, the printed circuit board in 3D

    Esp-32-s3-wroom-1

    JiaenLiew/Self-stabilising-gimbal

    Electronics and Control systems project with self made ESP32 devboard and DRV8316 pcbs

    28 parts
  • 2 layers96 × 50 mmPager, the printed circuit board in 3D

    Pager

    justinlindh/bramble

    Privacy-first LoRa mesh networking for ESP32-S3, built with ESP-IDF

    97 parts2MIT
  • 2 layers90 × 55 mmS3.1-before repack, the printed circuit board in 3D

    S3.1-before repack

    puji4810/coffe-scale

    USB-C J5 ──► U8 ESD ──► R19/R20 22R ──► U4 IO19/IO20 (native USB-Serial/JTAG) │VBUS ├─► U5 TP4057 充电 ──► J6 1S Li-ion └─► D1/Q1 负载切换 ──► VSYS ──► U6 XC6220 3V3 1A ──► VCC3V3 ──► U4/外设 └──► U7 HT7533 ──► VDDADC ──► U1/U3…

    96 partsApache-2.0
  • 4 layers68.1 × 75 mmHomefire, the printed circuit board in 3D

    Homefire

    JhanqueliX/Smart-light-socket-for-fire-prevention

    117 parts1
  • 2 layers250 × 150 mmStratoSTEAM, the printed circuit board in 3D

    StratoSTEAM

    robotgtfxry/StratoSTEAM

    112 parts
  • 4 layers77 × 45 mmNX ISD, the printed circuit board in 3D

    NX ISD

    Ghost3379/NX-ISD

    A more sophisticated version of the Artemis Watch by Circuitmess.

    81 parts2GPL-3.0
  • 2 layers45 × 100 mmWalkiepcb, the printed circuit board in 3D

    Walkiepcb

    houseofthe051010/ESP32-Walkie-Talkie-V2

    This ESP32 Walkie Talkie is redesigned with a SX1262 radio, a PCB, and a full case redesign.

    93 parts1

Questions

How big is the Esp32 bno085 PCB?

It measures 24.5 × 53.4 mm and has 2 copper layers, 1.58 mm thick.

What parts does the Esp32 bno085 use?

39 parts, built around the ESP32-S3-WROOM-1-N8, BNO085, TP4056-42-ESOP8 and XC6220B331MR-G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Esp32 bno085 KiCad files?

From the nemonamo/esp32_bno085 repository on GitHub, at the commit this page was made from: the board is esp32_bno085.kicad_pcb and its schematic esp32_bno085.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Esp32 bno085 design in my own project?

Its repository states no licence, so its author keeps all rights: ask nemonamo before reusing the design.