

An integrated data acquisition system for indoor and outdoor urban experiments
- Size
- 117 × 82 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 97
- Nets
- 145
- Pads
- 368
- Tracks, vias
- 565, 361
- Pours
- 68
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 10 Sep 2021
- Updated
- 5 Nov 2024
Overview
Pluma is an open-source printed circuit board by emotional-cities, from the emotional-cities/pluma repository on GitHub, published under the Apache-2.0 licence. It is a 4-layer board of 117 × 82 mm with 97 parts on 145 nets, routed with 565 tracks and 361 vias.
It is built around the ATXMEGA32A4-AU, 74LVC1G125 and FT232RL, with the TLV70033DDCR-MS, SI8610BC-B-IS and USBLC6-2SC6 among its other parts. Its parts include 29 capacitors, 28 resistors, 13 ICs, 3 connectors and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
6ATXMEGA32A4-AU
TQFP-44(10x10)-40℃~+85℃ 1.6V~3.6V 12bit 12bit 1KB 32KB 32MHz 34 4KB 8/16 Bit AVR Built-in FLASH TQFP-44(10x10) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)74LVC1G125
SOT-353SOT-353 Buffers, Drivers, Receivers, Transceivers ROHSWuxi I-core ElecBuffers, Drivers, Receivers, TransceiversFT232RL
SSOP-28-208mil-40℃~+85℃ 3.3V~5.25V、4V~5.25V USB 2.0 USB to UART SSOP-28-208mil USB Converters ROHSFTDIUSB ConvertersTLV70033DDCR-MS
SOT-23-5SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMSKSEMIUncategorisedSI8610BC-B-IS
SOIC-8-150mil-40℃~+125℃ 0 1 150Mbps 3750 50kV/us Fail-safe output、Power-on reset Low Level SOIC-8-150mil Digital Isolators ROHSSkyworks SolutionsDigital IsolatorsUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
README
README.mdEmotional Cities - Pluma
An integrated data acquisition system for indoor and outdoor urban experiments.
This package was developed for the eMOTIONAL CITIES Project, which received funding from European Union’s Horizon 2020 research and innovation programme, under the grant agreement No 945307. The eMOTIONAL CITIES Project is a consortium of 12 partners co-coordinated by IGOT and FMUL, taking place between 2021 and 2025. More information at https://emotionalcities-h2020.eu/
Parts
97| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 100nF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C3, C5, C7, C9, C12, C13, C14, C15, C21, C24, C27, C29, C32 |
| 8 | 0R | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R2, R3, R4, R5, R11, R12, R19, R20 |
| 8 | 10k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R6, R9, R10, R18, R22, R30, R68 |
| 6 | n.a. | TestPoint:TestPoint_Pad_1.0x1.0mm | GPS_RXI1, GPS_TXO1, SCL_portC1, SCL_portE1, SDA_portC1, SDA_portE1 |
| 5 | 10nF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C16, C18, C19, C20, C23 |
| 5 | 4.7uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C10, C11, C26, C28, C52 |
| 5 | MountingHole | MountingHole:MountingHole_3.2mm_M3_ISO14580 | H1, H2, H3, H4, H5 |
| 4 | TestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mm | +3V3_tp1, +5V_tp1, GND_tp1, GND_tp2 | |
| 4 | 3k3 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R7, R8, R13, R14 |
| 2 | 0R DNI | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R24, R26 |
| 2 | 100k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R25, R27 |
| 2 | 47pF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C4, C6 |
| 2 | GND | pluma Lybrary:TestPoint_Pad_2.0x3.0mm | TP16, TP17 |
| 2 | TLV70033DDCR | Package_TO_SOT_SMD:SOT-23-5 | IC1, IC4 |
| 1 | 100R | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R69 |
| 1 | 100uF 25V | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C39 |
| 1 | 10R | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R29 |
| 1 | 330R | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R37 |
| 1 | 330pF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C51 |
| 1 | 4.7nF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C2 |
| 1 | 40R@100MHz | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | L1 |
| 1 | 74LVC1G125 | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U8 |
| 1 | ATXMEGA32A4-AU | Package_QFP:TQFP-44_10x10mm_P0.8mm | U6 |
| 1 | Adafruit Feather M0 | pluma Lybrary:Adafruit Feather M0 | U5 |
| 1 | DNI | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R15 |
| 1 | EDA/GSR_Module_MIKROE_2860 | pluma Lybrary:EDA_MIKROE-2860-BLOCK | U2 |
| 1 | FT232RL | Package_SO:SSOP-28_5.3x10.2mm_P0.65mm | IC3 |
| 1 | GNSS_UBLOX_ZED_F9R | pluma Lybrary:ZED-F9R_footprint | U4 |
| 1 | HR_Module_AD8232 | pluma Lybrary:HEART_RATE_AD8632_PAD | U1 |
| 1 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | Motion_Sensor_Module_BNO055 #1 | pluma Lybrary:BNO55_MODULE | U3 |
| 1 | Motion_Sensor_Module_BNO055 #1_conn | pluma Lybrary:MQ172_4pin | U7 |
| 1 | OSCILLATOR | Crystal:Crystal_SMD_5032-4Pin_5.0x3.2mm | X1 |
| 1 | PA2 | pluma Lybrary:TestPoint_Pad_1.5x2.0mm | TP13 |
| 1 | PB3 | pluma Lybrary:TestPoint_Pad_1.5x2.0mm | TP15 |
| 1 | PC4 | pluma Lybrary:TestPoint_Pad_1.5x2.0mm | TP9 |
| 1 | Screw_Terminal_01x04 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-3-3.5-H_1x03_P3.50mm_Horizontal | J4 |
| 1 | Screw_Terminal_01x04 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-4-3.5-H_1x04_P3.50mm_Horizontal | J3 |
| 1 | Si8610BC-B-IS | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U10 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | IC2 |
| 1 | USB_B_Mini | pluma Lybrary:mini_USB | J1 |
| 1 | _ | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | PDI1 |
Similar boards
- 2 layers25.6 × 24.6 mm

- 2 layers120.4 × 100.4 mm

Relaymux
PetteriAimonen/relaymux
Hardware and firmware for a USB connected relay box
59 parts18BSD-2-Clause - 4 layers60 × 40 mm

Fast SiPM Photodetector
hannesduske/Fast_SiPM_Photodetector
An open-hardware SiPM photodetector with integrated low-noise amplifier, single-photon resolution, and temperature sensing for active thermal control.
80 parts1CERN-OHL-P-2.0 - 2 layers100 × 40 mm

B FT810-BRK R1.0
Boardoza/Boardoza_FT810_TFT_Driver_Breakout_Board
A breakout board built around the FT810 graphics engine for maker-friendly display, touch, and audio HMI projects.
76 partsCC-BY-SA-4.0 - 4 layers57.7 × 37.6 mm

- 4 layers43.2 × 50.8 mm

- 4 layers203.2 × 101.6 mm

Lboard2
electrodyssey/lboard2
experimental Spartan-6 sound processing board with XC6SLX9-TQG144 and TLV320AIC3204
230 parts7LGPL-3.0 - 4 layers100 × 100 mm

Breakout board v1
asinghani/mpw1-bringup
Attempts at recovering SKY130 MPW-ONE chips (December 2020 // March 2022)
88 parts3
Questions
How big is the Pluma PCB?
It measures 117 × 82 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Pluma use?
97 parts, built around the ATXMEGA32A4-AU, 74LVC1G125, FT232RL and TLV70033DDCR-MS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pluma KiCad files?
From the emotional-cities/pluma repository on GitHub, at the commit this page was made from: the board is Hardware/PCB/pluma.kicad_pcb and its schematic Hardware/PCB/pluma.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pluma design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).