Skip to the content
2 layers52.3 × 31.4 mmLTC4002 Breakout, the printed circuit board in 3D

Breakout board for the LTC4002 switch mode lipo battery charger

Size
52.3 × 31.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
37
Nets
19
Pads
109
Tracks, vias
103, 12
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
24 Jun 2026
Updated
24 Jun 2026

Overview

LTC4002 Breakout is an open-source printed circuit board by emmsey-square, from the emmsey-square/LTC4002_Breakout repository on GitHub, published under the MIT licence. It is a 2-layer board of 52.3 × 31.4 mm with 37 parts on 19 nets, routed with 103 tracks and 12 vias.

It is built around the LTC4002EDD-4.2#PBF. Its parts include 8 resistors, 4 capacitors, 2 diodes, 2 connectors and 1 IC. It belongs with the power and interfaces and adapters boards of this library.

Main components

1

README

README.md

Breakout board for the LTC4002 switched-mode lithium battery charger

Parts

37
QtyValueFootprintReferences
6PTHTestPoint:TestPoint_Keystone_5005-5009_CompactBAT, CHG, GATE, GND, GND, VIN
4MountingHole_Pad_MPMountingHole:MountingHole_2.2mm_M2_Pad_ViaH1, H2, H3, H4
23.5mmPCM_SparkFun-Connector:ScrewTerminal_1x02_P3.5mm_Horizontal_BlackJ1, J2
10.1AJumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmJP6
10.1RPCM_SparkFun-Resistor:R_0603_1608MetricR4
10.1uFPCM_SparkFun-Capacitor:C_0603_1608MetricC1
10.25AJumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmJP5
10.2RPCM_SparkFun-Resistor:R_0603_1608MetricR5
10.4RPCM_SparkFun-Resistor:R_0603_1608MetricR6
10.5AJumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmJP4
11.5AJumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mmJP2
110kPCM_SparkFun-Resistor:R_0603_1608MetricR1
110k NTC ThermistorResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_VerticalNTC
110uFPCM_SparkFun-Capacitor:C_0603_1608MetricC4
11AJumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmJP3
11N4007PCM_SparkFun-Semiconductor-Standard:SOD-123D2
11RPCM_SparkFun-Resistor:R_0603_1608MetricR7
12.2kPCM_SparkFun-Resistor:R_0603_1608MetricR8
122uFPCM_SparkFun-Capacitor:Panasonic_FC2
12kPCM_SparkFun-Resistor:R_0603_1608MetricR2
1470nFPCM_SparkFun-Capacitor:C_0603_1608MetricC3
16.8uHPCM_SparkFun-Coil:Inductor_7.3x6.6mmL1
168mPCM_SparkFun-Resistor:R_0603_1608MetricR3
1GreenPCM_SparkFun-LED:LED_0603_1608Metric_GreenD1
1LTC4002EDD-4.2Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.55x2.48mmU1
1PMOS_DGSPCM_SparkFun-Semiconductor-Standard:SOT23-3Q1
1~PCM_SparkFun-Jumper:Jumper_3_NC-1_TraceJP1

The 36 most common of 37 parts.

Similar boards

  • 4 layers126.1 × 123.7 mmVaACU, the printed circuit board in 3D

    VaACU

    Melih2123/VaACU

    Open source; Voltage and Amperage Control Unit, it can take 9-36V, AC 220V and then turn it to the standard: 3.3V, 12V and 5V while charging a battery.

    67 partsMIT
  • 2 layers40 × 34 mmDD HIP9011, the printed circuit board in 3D

    DD HIP9011

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    37 parts1.2k
  • 2 layers53.9 × 23.2 mmAnalog, the printed circuit board in 3D

    Analog

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    37 parts1kGPL-3.0
  • 2 layers52 × 51.8 mmEsp32-homeassistant rf bridge, the printed circuit board in 3D

    Esp32-homeassistant rf bridge

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    37 parts915
  • 2 layers87.8 × 59.8 mmFreeDeck SMD 2020-02, the printed circuit board in 3D

    FreeDeck SMD 2020-02

    FreeYourStream/freedeck-hardware

    all the stuff you need to build your own FreeDeck

    37 parts772
  • 2 layers65 × 28 mmBMS Cell Module, the printed circuit board in 3D

    BMS Cell Module

    stuartpittaway/diyBMS

    Do it yourself battery management system for Lithium ion battery packs/cells

    37 parts676GPL-3.0
  • 2 layers48 × 32 mmFlatSat, the printed circuit board in 3D

    FlatSat

    Pwnsat/FlatSat

    Flatsat v1.0 is a hardware based platform for aerospace cybersecurity research

    37 parts575GPL-2.0
  • 2 layers38.1 × 153.7 mmDEFOG PANEL, the printed circuit board in 3D

    DEFOG PANEL

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    37 parts431

Questions

How big is the LTC4002 Breakout PCB?

It measures 52.3 × 31.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the LTC4002 Breakout use?

37 parts, built around the LTC4002EDD-4.2#PBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the LTC4002 Breakout KiCad files?

From the emmsey-square/LTC4002_Breakout repository on GitHub, at the commit this page was made from: the board is LTC4002_breakout.kicad_pcb and its schematic LTC4002_breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the LTC4002 Breakout design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).