emir-altunkol/EE463-HardwareProjectThis is a repository for the term project of the EE463 Static Power Conversion I course given by METU EEE department. It is a DC motor drive project, whose details are included in the course repository.
Gate Driver Module is an open-source printed circuit board by emir-altunkol, from the emir-altunkol/EE463-HardwareProject repository on GitHub. It is a 2-layer board of 207.8 × 135.2 mm with 408 parts on 12 nets.
It is built around the ROE-0512S, TC4421AVAT and LTV-817. Its parts include 72 capacitors, 72 resistors, 72 ICs and 48 connectors.
This is a repository for the term project of the EE463 Static Power Conversion I course given by METU EEE department. It is a DC motor drive project, whose details are included in the course repository.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 48 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C2, C2, C2, C2, C2, C2, C2, C2, C2, C2, C2, C2, C2, C2, C2 +32 |
| 48 | Conn_01x04_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1 +32 |
| 24 | , , , , , , , , , , , , , , , +8 | ||
| 24 | 1kR | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R3, R3, R3, R3, R3, R3, R3, R3, R3, R3, R3, R3, R3, R3, R3 +8 |
| 24 | 330R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1 +8 |
| 24 | 4.7uF | Capacitor_SMD:CP_Elec_4x5.4 | C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1 +8 |
| 24 | 470R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R2, R2, R2, R2, R2, R2, R2, R2, R2, R2, R2, R2, R2, R2, R2 +8 |
| 24 | LTV-817 | Package_DIP:SMDIP-4_W7.62mm | U2, U2, U2, U2, U2, U2, U2, U2, U2, U2, U2, U2, U2, U2, U2, U2 +8 |
| 24 | ROE-0512S | ee463_footprint_lib:ROE-0512S | U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1 +8 |
| 24 | TC4421A | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3, U3, U3, U3, U3, U3, U3, U3, U3, U3, U3, U3, U3, U3, U3, U3 +8 |
The 288 most common of 408 parts.
emir-altunkol/EE463-HardwareProject
This is a repository for the term project of the EE463 Static Power Conversion I course given by METU EEE department. It is a DC motor drive project, whose details are included in the course repository.
emir-altunkol/EE463-HardwareProject
This is a repository for the term project of the EE463 Static Power Conversion I course given by METU EEE department. It is a DC motor drive project, whose details are included in the course repository.
emir-altunkol/EE463-HardwareProject
This is a repository for the term project of the EE463 Static Power Conversion I course given by METU EEE department. It is a DC motor drive project, whose details are included in the course repository.
Elektropac/MCS_Control
All the firmware for Control module
MakerLabTunisia/CARVER_X5
CARVER X5 is an OpenSourceHarware 5 Axis CNC Carving Machine - by MakerLabTunisia
misteu/RPiCoffee
Modding / hacking of a coffee machine (DeLonghi ECAM 22.110.B Magnifica S) for IoT capabilities
rimuadmin/TeensyMaestro-Hardware
Hardware for the TeensyMaestro
devfabiosilva/TeslaSMPS
DIY: High Voltage Range Switching Mode Power Supply for Embedded and Solar systems
JeanRenier/Remoting-a-microBIT-X
A set of ESP32 based controllers to remote a µBIT-X transceiver over the internet
It measures 207.8 × 135.2 mm and has 2 copper layers, 1.6 mm thick.
408 parts, built around the ROE-0512S, TC4421AVAT and LTV-817. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the emir-altunkol/EE463-HardwareProject repository on GitHub, at the commit this page was made from: the board is 2-Design/PCB/Gate_Driver_Module/Gate_Driver_Module.kicad_pcb and its schematic 2-Design/PCB/Controller_Module/Controller_Module.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask emir-altunkol before reusing the design.