emir-altunkol/EE463-HardwareProjectThis is a repository for the term project of the EE463 Static Power Conversion I course given by METU EEE department. It is a DC motor drive project, whose details are included in the course repository.
Controller Module is an open-source printed circuit board by emir-altunkol, from the emir-altunkol/EE463-HardwareProject repository on GitHub. It is a 2-layer board of 230 × 52.3 mm with 41 parts on 42 nets, routed with 138 tracks and 4 vias.
Its parts include 7 connectors, 2 capacitors and 2 resistors.
This is a repository for the term project of the EE463 Static Power Conversion I course given by METU EEE department. It is a DC motor drive project, whose details are included in the course repository.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | , , , , , , , , , , , , , , , +4 | ||
| 2 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 2 | SW_SPST | Button_Switch_THT:SW_PUSH_6mm_H8mm | SW_Gen_mode1, SW_Soft_st1 |
| 1 | 270R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 33kR | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 33kR | Potentiometer_THT:Potentiometer_Alps_RK163_Single_Horizontal | Pot_I_Set1 |
| 1 | Header_I_sense | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J7 |
| 1 | Headers_GD1 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | Headers_GD2 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | Headers_GD3 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | Headers_GD4 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | Headers_GD5 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | Headers_GD6 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | blue_pill | ee463_footprint_lib:blue_pill | STM32F103C8T1 |
The 35 most common of 41 parts.
It measures 230 × 52.3 mm and has 2 copper layers, 1.6 mm thick.
41 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the emir-altunkol/EE463-HardwareProject repository on GitHub, at the commit this page was made from: the board is 2-Design/PCB/Controller_Module/Controller_Module.kicad_pcb and its schematic 2-Design/PCB/Controller_Module/Controller_Module.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask emir-altunkol before reusing the design.
emir-altunkol/EE463-HardwareProject
This is a repository for the term project of the EE463 Static Power Conversion I course given by METU EEE department. It is a DC motor drive project, whose details are included in the course repository.
emir-altunkol/EE463-HardwareProject
This is a repository for the term project of the EE463 Static Power Conversion I course given by METU EEE department. It is a DC motor drive project, whose details are included in the course repository.
emir-altunkol/EE463-HardwareProject
This is a repository for the term project of the EE463 Static Power Conversion I course given by METU EEE department. It is a DC motor drive project, whose details are included in the course repository.
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
openwch/ch32v003
CH32V003 is an ultra-cheap RISC-V MCU with 2KB SRAM, 16KB flash, and up to 18 GPIOs that sells for under $0.10
imchipwood/dumbpad
Simple 4x4 numpad with rotary encoder. Powered by QMK via ATmega32u4 Pro Micro
jrsteensen/OpenHornet
OpenHornet 1:1 F/A-18C Simulator Repository
fabiansteiner/OpenValve
3D-printable pinch valve for irrigation and sensor-driven liquid control.