2 layers70 × 50 mm
4 layers70 × 50 mm
Control Blade
EmilsSturitis/McuStmDevsimple stm32 dev pcb
- Size
- 70 × 50 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 62
- Nets
- 146
- Pads
- 305
- Tracks, vias
- 464, 75
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 26 Jul 2022
- Updated
- 1 May 2025
Overview
Control Blade is an open-source printed circuit board by EmilsSturitis, from the EmilsSturitis/McuStmDev repository on GitHub. It is a 4-layer board of 70 × 50 mm with 62 parts on 146 nets, routed with 464 tracks and 75 vias.
It is built around the W25Q32JVZPIQ, NUP4202W1 and AMS1117-3.3, with the BAV99, ASMT-YTB7-0AA02 and USB4105-GF-A among its other parts. Its parts include 17 capacitors, 16 resistors, 12 ICs, 6 diodes and 5 connectors. It belongs with the STM32 boards of this library.
Main components
6
W25Q32JVZPIQ
WSON-8-EP(5x6)-40℃~+85℃ 100,000 cycles 10uA 133MHz 2.7V~3.6V 20 Years 32Mbit 3ms SPI WSON-8-EP(5x6) NOR FLASH ROHSWinbondNOR FLASH
NUP4202W1
SC-88-40℃~+125℃ 1.5pF、3pF 14.5V 28A@8/20us 500W 5V 5uA 6V ESD IEC 61000-4-2 SC-88 ESD and Surge Protection (TVS/ESD) ROHSonsemiESD And Surge Protection (TVS/ESD)
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
BAV99
SOT-231 Pair Series Connection 1.25V@150mA 100V 215mA 250mW 4A 4ns 500nA@80V SOT-23 Switching Diodes ROHSNexperiaSwitching Diodes
ASMT-YTB7-0AA02
SMD3528-6P-40℃~+100℃ 120° 2.1V、3.1V、3.1V 20mA 384mcd、650mcd、1.9cd 465nm~475nm、525nm~537nm、617nm~627nm Diffused Lens Discrete Diode Red, green, blue SMD3528-6P LED Indication - Discrete ROHSBroadcom LimitedLED Indication - Discrete
USB4105-GF-A
SMD-40℃~+85℃ 1 12P 48V 5A Black Female Surface Mount, Right Angle Type-C USB 2.0 SMD USB Connectors ROHSGlobal Connector Technology (GCT)USB Connectors
README
README.mdMcuStmDev
simple stm32 dev pcb
Parts
62| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | NUP4202 | Package_TO_SOT_SMD:SOT-363_SC-70-6 | U2, U3, U5, U6, U7, U8, U9, U10, U11 |
| 8 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R10, R11, R12, R13, R14, R15, R16 |
| 5 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3, C4, C5, C13 |
| 4 | 100pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C15, C16, C17, C18 |
| 4 | BAV99 | Package_TO_SOT_SMD:SOT-23 | D5, D6, D7, D8 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965 | H1, H2, H3, H4 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric | R2, R3, R4 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | R5, R6 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C10 |
| 2 | 14p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C11, C12 |
| 2 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7, C8 |
| 2 | 5.11k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R9 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9 |
| 1 | 10n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6 |
| 1 | 1M | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | ASMT-YTB7-0AA02 | LED_SMD:LED_Avago_PLCC6_3x2.8mm | D1 |
| 1 | Conn_01x03 | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J5 |
| 1 | Conn_01x04 | Connector_JST:JST_XH_S4B-XH-A_1x04_P2.50mm_Horizontal | J6 |
| 1 | Conn_02x20_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Horizontal | J7 |
| 1 | Conn_ARM_SWD_TagConnect_TC2030-NL | Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J12 |
| 1 | Crystal_GND24_Small | Crystal:Crystal_SMD_Abracon_ABM10-4Pin_2.5x2.0mm | Y1 |
| 1 | Ferrite_Bead_Small | Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | FB1 |
| 1 | LED | LED_SMD:LED_PLCC-2 | D4 |
| 1 | STM32F412RGTx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | USB4105-GF-A | MyLib:GCT_USB4105-GF-A | J1 |
| 1 | W25Q32JVZP | Package_SON:WSON-8-1EP_6x5mm_P1.27mm_EP3.4x4.3mm | U9 |
Questions
How big is the Control Blade PCB?
It measures 70 × 50 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Control Blade use?
62 parts, built around the W25Q32JVZPIQ, NUP4202W1, AMS1117-3.3 and BAV99. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Control Blade KiCad files?
From the EmilsSturitis/McuStmDev repository on GitHub, at the commit this page was made from: the board is Hardware/Control_Blade_0x00/Control_Blade.kicad_pcb and its schematic Hardware/Control_Blade_0x00/Control_Blade.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Control Blade design in my own project?
Its repository states no licence, so its author keeps all rights: ask EmilsSturitis before reusing the design.
More from EmilsSturitis/McuStmDev
1Similar boards
- 2 layers54 × 60 mm
- 4 layers69.9 × 40 mm
- 2 layers54 × 40 mm
- 2 layers35 × 35 mm
CAN Base 0x00
EmilsSturitis/Sensors
Single repo for all of the sensor and interface breakout pcb's
23 parts - 2 layers139.7 × 88.9 mm
- 4 layers105.3 × 75.1 mm
FriedSalmon2040
Fisheiyy/FriedSalmon2040
A, probably partially-functional, RP2040 based, 3D Printer Motherboard.
184 parts3 - 4 layers80 × 80 mm
- 2 layers
