

Dspod u3c5
A family of boards for Eurorack DSP audio
- Size
- 26.4 × 41.7 mm
- Copper layers
- 4
- Thickness
- 1.53 mm
- Parts
- 58
- Nets
- 96
- Pads
- 298
- Tracks, vias
- 696, 97
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 14 Sep 2025
- Updated
- 6 Oct 2026
Overview
Dspod u3c5 is an open-source printed circuit board by emeb, from the emeb/dspod repository on GitHub, published under the MIT licence. It is a 4-layer board of 26.4 × 41.7 mm with 58 parts on 96 nets, routed with 696 tracks and 97 vias.
It is built around the NAU88C22YG, APS6404L-3SQR-SN and SI5351A-B-GT, with the STM32U3C5RIT6, 7A-16.000MAAJ-T and PMEG2005CT,215-JSM among its other parts. Its parts include 23 capacitors, 7 resistors, 6 ICs, 5 connectors and 2 diodes. It belongs with the audio and music boards and the STM32 boards of this library.
Main components
6NAU88C22YG
QFN-32-EP(5x5)-40℃~+85℃ 2.5V~3.6V 8kHz~192kHz Built-in phase-locked loop、Multi-channel audio、On-chip digital gain、Mute control Encoder/decoder I2S QFN-32-EP(5x5) Audio Interface ICs ROHSNuvoton TechAudio Interface ICsAPS6404L-3SQR-SN
SOP-8SOP-8 PSRAM ROHSAP MemoryDRAMSI5351A-B-GT
MSOP-10-40℃~+85℃ 1.71V~3.6V 200MHz 3 I2C MSOP-10 Clock Generators, PLLs, Frequency Synthesizers ROHSSilicon LabsClock Generators, PLLs, Frequency SynthesizersSTM32U3C5RIT6
-- HWDG ROHSSTMicroelectronicsUncategorised7A-16.000MAAJ-T
SMD5032-20℃~+70℃ 16MHz 18pF 50Ω ±30ppm ±30ppm SMD5032 Crystals ROHSTXC CorpCrystalsPMEG2005CT,215-JSM
SOT-231 Pair Common Cathode 200mA 240mV@100uA、320mV@1mA、400mV@10mA、500mV@30mA、800mV@100mA 2uA@25V 30V 600mA SOT-23 Schottky Diodes ROHSJSMSEMISchottky Diodes
README
README.mddspod
dspod is a small ecosystem of audio DSP boards

The collection consists of the following hardware
- dspod_module - a motherboard / carrier that adapts the standard dspod pinout for Eurorack, including power, I/O level buffers and user interface.
- dspod_cv1800b - a daughterboard comprising a Sophgo/CVItek CV1800B Linux SoC with 64MB RAM, SD card interface, USB and GPIO + audio I/O.
- dspod_rp2350 - a daughterboard with a Raspberry Pi RP2350, 4MB flash, 8MB PSRAM, USB, GPIO and audio I/O.
- dspod_esp32s3 - a daughterboard with an ESP32 S3 processor, 4MB flash, 2MB PSRAM, USB, RF, GPIO and audio I/O.
- dspod_h7r3 - a daughterboard with an STM32H7R3V8 MCU, QSPI flash or PSRAM, USB, GPIO and audio I/O
- dspod_u3c5 - a daughterboard with an STM32U3C5RI MCU, QSPI PSRAM, USB, GPIO and audio I/O.
- dspod_up5k - a daughterboard with an iCE40UP5k FPGA, Flash, PSRAM, ADC, GPIO and audio I/O.
- dspod_stampp4 - a daughterboard with an ESP32 P4 MCU, 16MB flash, 32MB PSRAM, USB, GPIO and Audio I/O
Parts
58| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 0.1uf | Capacitor_SMD:C_0402_1005Metric | C1, C3, C4, C8, C9, C10, C12, C14, C15, C16 |
| 9 | 4.7uf | Capacitor_SMD:C_0402_1005Metric | C2, C5, C6, C13, C17, C18, C19, C20, C21 |
| 2 | 29pf | Capacitor_SMD:C_0402_1005Metric | C22, C23 |
| 2 | 4k7 | Resistor_SMD:R_0402_1005Metric | R6, R7 |
| 2 | 5k1 | Resistor_SMD:R_0402_1005Metric | R3, R4 |
| 2 | Conn_01x16 | Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_Vertical | J4, J5 |
| 2 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2 | SW1, SW2 |
| 2 | XC6222B331MR-G | Package_TO_SOT_SMD:SOT-23-5 | U2, U3 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 10uf | Capacitor_SMD:C_0805_2012Metric | C11 |
| 1 | 1M | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 1k | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 1uf | Capacitor_SMD:C_0402_1005Metric | C7 |
| 1 | 7A-16.000MAAJ-T | Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm | Y2 |
| 1 | ACLK | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | APS6404L-3SQR-SN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | Conn_01x04 | Connector_PinHeader_1.27mm:PinHeader_1x04_P1.27mm_Vertical | J1 |
| 1 | FA-236 25.000MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | Jumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | LED Green | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | NAU88C22 | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.1x3.1mm | U6 |
| 1 | PB12 | TestPoint:TestPoint_Pad_D1.0mm | TP10 |
| 1 | PB2 | TestPoint:TestPoint_Pad_D1.0mm | TP6 |
| 1 | PC4 | TestPoint:TestPoint_Pad_D1.0mm | TP4 |
| 1 | PC5 | TestPoint:TestPoint_Pad_D1.0mm | TP5 |
| 1 | PC6 | TestPoint:TestPoint_Pad_D1.0mm | TP9 |
| 1 | PC7 | TestPoint:TestPoint_Pad_D1.0mm | TP8 |
| 1 | PC8 | TestPoint:TestPoint_Pad_D1.0mm | TP7 |
| 1 | PMEG2005CT,215 | Package_TO_SOT_SMD:SOT-23 | D1 |
| 1 | SI5351A | Package_SO:MSOP-10_3x3mm_P0.5mm | U1 |
| 1 | STDC14 | Connector_PinHeader_1.27mm:PinHeader_2x07_P1.27mm_Vertical | J2 |
| 1 | STM32U3C5RIT6 | Package_QFP:LQFP-64_10x10mm_P0.5mm | U4 |
| 1 | Small Avatar / Logo | EMEB:avatar_small | A1 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J3 |
More from emeb/dspod
7- 4 layers26.4 × 41.7 mm

- 2 layers68.6 × 101.6 mm

- 4 layers26.4 × 41.7 mm

- 4 layers26.4 × 41.7 mm

- 4 layers26.4 × 41.7 mm

- 4 layers26.4 × 41.7 mm

- 4 layers29.7 × 41.7 mm

Similar boards
- 4 layers32.5 × 22 mm

Open PWM Gyro
jerinabr/Open-PWM-Gyro-Hardware
PWM gyro for fixed wing RC planes. Meant to be connected to an ELRS RX or other RX that outputs CRSF control data.
27 parts1 - 4 layers42 × 44.4 mm

STM32 FlightController
JLjoestar23/STM32_FlightController
PCB, software, firmware, and other files related to a custom made STM32-based flight controller.
56 parts1 - 2 layers95.3 × 72.4 mm

Rck22
Muriukidavid/reflow_toaster_oven
Design for a home toaster oven reflow based on tinyk22 module
81 parts1 - 4 layers95 × 57.4 mm

- 2 layers109 × 30.6 mm

- 6 layers43.9 × 118.2 mm

Sisu SSE-9
briskspirit/Sisu_SSE-9
Experimental six-layer LTE replacement mainboard for the Nokia 3210, built around RP2354B and Telit LE910C1-WWX.
296 parts19Unlicense - 4 layers152.4 × 63.5 mm

- 2 layers100 × 100 mm

Codec test nau88c22
Neotron-Compute/codec-test-nau88c22
A test PCB for the NAU88C22 CODEC chip
74 parts2
Questions
How big is the Dspod u3c5 PCB?
It measures 26.4 × 41.7 mm and has 4 copper layers, 1.53 mm thick.
What parts does the Dspod u3c5 use?
58 parts, built around the NAU88C22YG, APS6404L-3SQR-SN, SI5351A-B-GT and STM32U3C5RIT6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Dspod u3c5 KiCad files?
From the emeb/dspod repository on GitHub, at the commit this page was made from: the board is dspod_u3c5/Hardware/dspod_u3c5.kicad_pcb and its schematic dspod_cv1800b/Hardware/dspod_cv1800b.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Dspod u3c5 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).