

Dspod esp32s3
A family of boards for Eurorack DSP audio
- Size
- 26.4 × 41.7 mm
- Copper layers
- 4
- Thickness
- 1.53 mm
- Parts
- 52
- Nets
- 85
- Pads
- 268
- Tracks, vias
- 638, 78
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 14 Sep 2025
- Updated
- 6 Oct 2026
Overview
Dspod esp32s3 is an open-source printed circuit board by emeb, from the emeb/dspod repository on GitHub, published under the MIT licence. It is a 4-layer board of 26.4 × 41.7 mm with 52 parts on 85 nets, routed with 638 tracks and 78 vias.
It is built around the ESP32-S3FH4R2, NAU88C22YG and PMEG2005CT,215-JSM. Its parts include 24 capacitors, 8 resistors, 5 connectors, 4 ICs and 2 diodes. It belongs with the audio and music boards and the ESP32 boards of this library.
Main components
3ESP32-S3FH4R2
QFN-56(7x7)-104.5dBm -40℃~+85℃ 2.4GHz 21dBm 340mA 3V~3.6V 88mA Bluetooth5.0 LX7 Chip UART、SDIO、SPI、I2C、JTAG QFN-56(7x7) WiFi Modules ROHSEspressif SystemsWiFi ModulesNAU88C22YG
QFN-32-EP(5x5)-40℃~+85℃ 2.5V~3.6V 8kHz~192kHz Built-in phase-locked loop、Multi-channel audio、On-chip digital gain、Mute control Encoder/decoder I2S QFN-32-EP(5x5) Audio Interface ICs ROHSNuvoton TechAudio Interface ICsPMEG2005CT,215-JSM
SOT-231 Pair Common Cathode 200mA 240mV@100uA、320mV@1mA、400mV@10mA、500mV@30mA、800mV@100mA 2uA@25V 30V 600mA SOT-23 Schottky Diodes ROHSJSMSEMISchottky Diodes
README
README.mddspod
dspod is a small ecosystem of audio DSP boards

The collection consists of the following hardware
- dspod_module - a motherboard / carrier that adapts the standard dspod pinout for Eurorack, including power, I/O level buffers and user interface.
- dspod_cv1800b - a daughterboard comprising a Sophgo/CVItek CV1800B Linux SoC with 64MB RAM, SD card interface, USB and GPIO + audio I/O.
- dspod_rp2350 - a daughterboard with a Raspberry Pi RP2350, 4MB flash, 8MB PSRAM, USB, GPIO and audio I/O.
- dspod_esp32s3 - a daughterboard with an ESP32 S3 processor, 4MB flash, 2MB PSRAM, USB, RF, GPIO and audio I/O.
- dspod_h7r3 - a daughterboard with an STM32H7R3V8 MCU, QSPI flash or PSRAM, USB, GPIO and audio I/O
- dspod_u3c5 - a daughterboard with an STM32U3C5RI MCU, QSPI PSRAM, USB, GPIO and audio I/O.
- dspod_up5k - a daughterboard with an iCE40UP5k FPGA, Flash, PSRAM, ADC, GPIO and audio I/O.
- dspod_stampp4 - a daughterboard with an ESP32 P4 MCU, 16MB flash, 32MB PSRAM, USB, GPIO and Audio I/O
Parts
52| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 4.7uf | Capacitor_SMD:C_0402_1005Metric | C3, C10, C11, C20, C21, C22, C23, C24 |
| 7 | 0.1uf | Capacitor_SMD:C_0402_1005Metric | C1, C6, C8, C14, C16, C17, C18 |
| 4 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3, TP4 |
| 3 | 1uf | Capacitor_SMD:C_0402_1005Metric | C4, C9, C19 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R2, R3 |
| 2 | 27pf | Capacitor_SMD:C_0402_1005Metric | C13, C15 |
| 2 | 4k7 | Resistor_SMD:R_0402_1005Metric | R7, R8 |
| 2 | 5k1 | Resistor_SMD:R_0402_1005Metric | R4, R5 |
| 2 | Conn_01x16 | Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_Vertical | J4, J5 |
| 2 | XC6222B331MR-G | Package_TO_SOT_SMD:SOT-23-5 | U1, U2 |
| 1 | 100pf | Capacitor_SMD:C_0402_1005Metric | C12 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 10uf | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 1M | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 2.2nH 500ma | Capacitor_SMD:C_0603_1608Metric | L2 |
| 1 | 2.4nH | Capacitor_SMD:C_0603_1608Metric | L1 |
| 1 | 2.6pf | Capacitor_SMD:C_0402_1005Metric | C5 |
| 1 | 3pf | Capacitor_SMD:C_0402_1005Metric | C7 |
| 1 | 40MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | CONN_CONUFL001-SMD-T_LNX | EMEB:CONUFL001-SMD-T | J1 |
| 1 | ESP32-S3FH4R2 | EMEB:ESP32-S3 | U3 |
| 1 | LED Green | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | NAU88C22 | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.1x3.1mm | U4 |
| 1 | PMEG2005CT,215 | Package_TO_SOT_SMD:SOT-23 | D1 |
| 1 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2 | SW1 |
| 1 | Serial | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Horizontal | J2 |
| 1 | Small Avatar / Logo | EMEB:avatar_small | A1 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J3 |
More from emeb/dspod
7- 4 layers26.4 × 41.7 mm

- 2 layers68.6 × 101.6 mm

- 4 layers26.4 × 41.7 mm

- 4 layers26.4 × 41.7 mm

- 4 layers26.4 × 41.7 mm

- 4 layers26.4 × 41.7 mm

- 4 layers29.7 × 41.7 mm

Similar boards
- 4 layers32.5 × 22 mm

Open PWM Gyro
jerinabr/Open-PWM-Gyro-Hardware
PWM gyro for fixed wing RC planes. Meant to be connected to an ELRS RX or other RX that outputs CRSF control data.
27 parts1 - 4 layers42 × 44.4 mm

STM32 FlightController
JLjoestar23/STM32_FlightController
PCB, software, firmware, and other files related to a custom made STM32-based flight controller.
56 parts1 - 2 layers95.3 × 72.4 mm

Rck22
Muriukidavid/reflow_toaster_oven
Design for a home toaster oven reflow based on tinyk22 module
81 parts1 - 4 layers95 × 57.4 mm

- 2 layers109 × 30.6 mm

- 6 layers43.9 × 118.2 mm

Sisu SSE-9
briskspirit/Sisu_SSE-9
Experimental six-layer LTE replacement mainboard for the Nokia 3210, built around RP2354B and Telit LE910C1-WWX.
296 parts19Unlicense - 4 layers152.4 × 63.5 mm

- 2 layers100 × 100 mm

Codec test nau88c22
Neotron-Compute/codec-test-nau88c22
A test PCB for the NAU88C22 CODEC chip
74 parts2
Questions
How big is the Dspod esp32s3 PCB?
It measures 26.4 × 41.7 mm and has 4 copper layers, 1.53 mm thick.
What parts does the Dspod esp32s3 use?
52 parts, built around the ESP32-S3FH4R2, NAU88C22YG and PMEG2005CT,215-JSM. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Dspod esp32s3 KiCad files?
From the emeb/dspod repository on GitHub, at the commit this page was made from: the board is dspod_esp32s3/Hardware/dspod_esp32s3.kicad_pcb and its schematic dspod_cv1800b/Hardware/dspod_cv1800b.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Dspod esp32s3 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).