
SparkFun BMV080 panelized
embeddedos-org/eCAD-Hardware-Products
Hardware designs + EE docs + Board datasheets of Multiple products

Hardware designs + EE docs + Board datasheets of Multiple products
Eos esp32-devkit is an open-source printed circuit board by embeddedos-org, from the embeddedos-org/eCAD-Hardware-Products repository on GitHub, published under the MIT licence. It is a 2-layer board of 27.9 × 48.8 mm with 36 parts on 71 nets, routed with 480 tracks and 36 vias.
It is built around the ESP32-WROOM-32E-N4, CP2102N-A02-GQFN24R and AP7361C-33E, with the SP0503BAHTG, MMBT3904LT1G and 1206L050YR among its other parts. Its parts include 12 resistors, 9 capacitors, 4 ICs, 3 diodes and 3 connectors. It belongs with the ESP32 boards of this library.
Hardware / PCB CAD design collection for the EmbeddedOS (EoS) ecosystem.
The repository organizes hardware product designs by application domain. Each
domain holds one or more product lines, and each product line typically carries
a product datasheet, a bill of materials (bom.csv), power-budget simulation
scripts, and placeholder directories for PCB and mechanical CAD artifacts.
Several product lines also include KiCad schematics (*.kicad_sch).
Status varies by design. Directories are at different maturity levels (many "Design" / "Pre-production"); PCB and CAD folders often contain
.gitkeepplaceholders rather than finished layouts. Check each design's ownREADME.mdanddocs/for its current state.
The repository contains 16 domain design collections:
| Domain | Focus |
|---|---|
eAerospace_CAD_Design | Aircraft components, avionics, UAV/drone systems, space systems |
eConsumer_CAD_Design | Smart home devices, personal wearables, AR/smart devices |
eCybersecurity_CAD_Design | Security appliances and physical security systems |
eDefense_CAD_Design | Surveillance, tactical communications, protection equipment |
eElectronics_CAD_Design | PCBs, embedded controllers, RF modules, FPGAs, AI accelerators |
eEnergy_CAD_Design | Battery products, renewable energy systems, power electronics |
eHealth365_CAD_Design | Two-device health monitoring system (smart patch / smart ring) |
eIndustrial_CAD_Design | Sensors, industrial electronics, infrastructure equipment |
eMedical_CAD_Design | Diagnostic, surgical, patient-care, laboratory equipment |
eMining_CAD_Design | Autonomous mining/construction equipment, industrial safety systems |
ePAM_CAD_Design | Personal air/ground mobility — solar-hybrid transport, 4-product line |
eRadar360_CAD_Design | 360° automotive safety radar + laser + V2X + AI threat detection |
eRobotics_CAD_Design | Industrial robots, autonomous systems, robot components |
eSmartCity_CAD_Design | Urban infrastructure, utilities, telecommunications |
eTransport_CAD_Design | Automotive electronics, rail systems, maritime systems |
eosHealth_CAD_Design | Four-device wearable health platform |
Plus:
future_designs/ — early/prospective concepts (e.g. eBCI-Lite)docs/ — repository-level documentationMost domains follow a common structure, for example:
eAerospace_CAD_Design/
README.md
docs/ business_plan.md, regulatory_path.md
ebuild_simulation/ eBuild simulation notes
<product_line>/
product_datasheet.md
bom.csv
simulation/power_budget_sim.py
hardware/
pcb/ cad/ antenna/ (artifact folders; often .gitkeep placeholders)Artifact formats present in the repo include Markdown datasheets, CSV BOMs,
Python simulation scripts, and KiCad schematics (*.kicad_sch). Some product
lines also include TypeScript/Dart companion app sources and 3D-model notes.
Power-budget simulations are plain Python scripts, runnable per product line:
cd eAerospace_CAD_Design/<product_line>/simulation/
python3 power_budget_sim.pyDesign docs reference the EoSim digital-twin platform for hardware-in-the-loop testing. Running one script alone does not establish that a product is validated.
The committed tools/catalog/product_inventory.json is the complete product
execution set. The v1 contract schemas and policy requirements are documented in
docs/hardware-validation-contract-v1.md.
Discover inventory drift and inspect local tool capabilities:
python3 tools/validate_products.py discover
python3 tools/validate_products.py capabilitiesExecute V0-V4 for every inventoried product and write hash-bound receipts:
python3 tools/validate_products.py validate \
--all \
--output /tmp/ecad-validation \
--mode evidence
python3 tools/validate_products.py verify-bundle \
/tmp/ecad-validation/bundle.json--mode evidence succeeds when the selected inventory was executed and valid
receipts were written. Individual products may still be honestly FAIL,
BLOCKED, INCONCLUSIVE, or NOT_RUN. Use --mode gate for a release check;
it succeeds only when every selected product has real PASS evidence for V0,
V1, V2, V3, and V4. Historical baseline entries never waive a failed or missing
requirement.
datasets/cad/ holds CAD dataset items for the multi-domain validation work
in issue #27. Each item is a STEP design, the design intent the CAD cannot
carry, and machine-readable requirements; the pipeline extracts it with the
OpenCASCADE kernel, builds an engineering model in which every value states
its source and status, and runs V0-V4 with domain simulators. UNKNOWN
values are never filled in: a requirement that depends on one is BLOCKED.
python3 -m pip install -r tools/requirements.txt -r tools/requirements-cad.txt
python3 tools/cad_dataset.py check datasets/cad/robotic_joint_001
python3 tools/cad_dataset.py validate datasets/cad/robotic_joint_001 --output /tmp/joint-runSee datasets/cad/README.md and docs/cad-dataset-engineering-model-v1.md.
MIT — see LICENSE.
One exception: the EmbeddedOS original boards in boards/eos, their design files and the footprint library drawn for them are Copyright (c) 2026 Kartikeydheer Srivastava, all rights reserved, and are not under the MIT licence. The exact files are listed in boards/eos/README.md.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10k | Resistor_SMD:R_0402_1005Metric | R4, R5, R10, R11 |
| 4 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C1, C2, C6, C8 |
| 3 | 100n | Capacitor_SMD:C_0402_1005Metric | C3, C7, C9 |
| 3 | 5.1k | Resistor_SMD:R_0402_1005Metric | R1, R2, R12 |
| 2 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 1u | Capacitor_SMD:C_0402_1005Metric | C5 |
| 1 | 22.1k | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | 22u | Capacitor_SMD:C_0805_2012Metric | C4 |
| 1 | 47.5k | Resistor_SMD:R_0402_1005Metric | R9 |
| 1 | 500mA | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | 680 | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 750 | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | AP7361C-33 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | BOOT | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2 | SW2 |
| 1 | CP2102N-A02-GQFN24 | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U4 |
| 1 | EN | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2 | SW1 |
| 1 | ESP32-WROOM-32E-N4 | RF_Module:ESP32-WROOM-32E | U1 |
| 1 | IO4 | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | J2 | Connector_PinHeader_2.54mm:PinHeader_1x19_P2.54mm_Vertical | J2 |
| 1 | J3 | Connector_PinHeader_2.54mm:PinHeader_1x19_P2.54mm_Vertical | J3 |
| 1 | PMEG6010CEH | Diode_SMD:D_SOD-123F | D1 |
| 1 | PWR | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | SP0503BAHTG | Package_TO_SOT_SMD:SOT-143 | U2 |
| 1 | USB-C | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |

embeddedos-org/eCAD-Hardware-Products
Hardware designs + EE docs + Board datasheets of Multiple products

embeddedos-org/eCAD-Hardware-Products
Hardware designs + EE docs + Board datasheets of Multiple products

embeddedos-org/eCAD-Hardware-Products
Hardware designs + EE docs + Board datasheets of Multiple products

embeddedos-org/eCAD-Hardware-Products
Hardware designs + EE docs + Board datasheets of Multiple products

embeddedos-org/eCAD-Hardware-Products
Hardware designs + EE docs + Board datasheets of Multiple products

embeddedos-org/eCAD-Hardware-Products
Hardware designs + EE docs + Board datasheets of Multiple products

embeddedos-org/eCAD-Hardware-Products
Hardware designs + EE docs + Board datasheets of Multiple products

embeddedos-org/eCAD-Hardware-Products
Hardware designs + EE docs + Board datasheets of Multiple products

embeddedos-org/eCAD-Hardware-Products
Hardware designs + EE docs + Board datasheets of Multiple products

embeddedos-org/eCAD-Hardware-Products
Hardware designs + EE docs + Board datasheets of Multiple products

embeddedos-org/eCAD-Hardware-Products
Hardware designs + EE docs + Board datasheets of Multiple products

embeddedos-org/eCAD-Hardware-Products
Hardware designs + EE docs + Board datasheets of Multiple products

hannesduske/Avalanche_Laser_Driver
An open-hardware avalanche transistor based nanosecond laser driver with integrated high-voltage supply capable of generating 150 A peak current pulses.

ehasunchy/kicad-pcb-projects
KiCad PCB design portfolio featuring ESP32 IoT hardware, power regulation, USB interfaces, schematics, PCB layouts, and manufacturing files.


332753-art/Water_Quality_Monitoring
portable Water Quality Monitoring System for Live Fish Transport

nuerolynx/embedded-systems-lab
Arduino UNO R4 WiFi and ESP32 prototypes for access control, automation, displays, monitoring, and Bluetooth audio.



It measures 27.9 × 48.8 mm and has 2 copper layers, 1.6 mm thick.
36 parts, built around the ESP32-WROOM-32E-N4, CP2102N-A02-GQFN24R, AP7361C-33E and SP0503BAHTG. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the embeddedos-org/eCAD-Hardware-Products repository on GitHub, at the commit this page was made from: the board is boards/eos/eos-esp32-devkit/hardware/eos-esp32-devkit.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).