2 layers
MK1 funzt
emanuel-eckstein/VerteilteSysteme
Alles rund um die Belegarbeit Verteilte Systeme, MQTT und RESTful Web Service
10 parts
2 layers
Alles rund um die Belegarbeit Verteilte Systeme, MQTT und RESTful Web Service
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 15
- Nets
- 39
- Pads
- 91
- Tracks, vias
- 105, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 8 Jul 2024
- Updated
- 1 Oct 2024
Overview
MK1 is an open-source printed circuit board by emanuel-eckstein, from the emanuel-eckstein/VerteilteSysteme repository on GitHub. It is a 2-layer board with 15 parts on 39 nets, routed with 105 tracks and 0 vias.
It is built around the HLK-20M05 and DS18B20. Its parts include 1 IC and 1 connector. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
2
HLK-20M05
插件0.1W 100mVp-p 20W 22.5mm 32mm 3kV 4A 56mm 5V 70V~350V 82% 85VAC~264VAC Short Circuit Protection、Over Current Protection DIP,56x32mm AC-DC Power Modules ROHSHI-LINKAC-DC Power Modules
DS18B20
TO-92-55℃~+125℃ 12bit 3V~5.5V 750ms Single-bus ±0.4℃ TO-92 Temperature Sensors ROHSUMWTemperature Sensors
Parts
15| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | ~ | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | AC220V_inlet1, AC220V_outlet1 |
| 1 | Ai-Thinker-Ra-02 | AAA_Emanuel:LoRa2 | LoRa-module1 |
| 1 | DC5V-DC3.3V | Converter_DCDC:Converter_DCDC_Murata_OKI-78SR_Vertical | U2 |
| 1 | DS18B20 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | temperature_sensor1 |
| 1 | HLK-20M05 | Converter_ACDC:Converter_ACDC_Hi-Link_HLK-20Mxx | PS1 |
| 1 | raspi-zero-2-w | Module:Raspberry_Pi_Zero_Socketed_THT_FaceDown_MountingHoles | J1 |
| 1 | ~ | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | power_out1 |
| 1 | ~ | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | 3.3V_Relais1 |
| 1 | ~ | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | LED_traffic_light1 |
The 10 most common of 15 parts.
More from emanuel-eckstein/VerteilteSysteme
1Similar boards
- 2 layers111.8 × 60 mm
- 2 layers278 × 135 mm
- 2 layers
- 2 layers165.2 × 114.6 mm
Web controlled relay board v2.0
ambadran/Free-Lance-Projects
repo for holding my free lance work
71 parts - 2 layers
- 2 layers33.7 × 97.8 mm
HAN ESP TSS721
UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported
29 parts470 - 2 layers121 × 68 mm
Freeds sanchez
pablozg/freeds
Derivador de energía solar excedente creado por Pablo Zerón, Diseño PCB por Amcalo, Tester original por Aeizoon, Wiki por Zoilo Mora
42 parts108 - 2 layers80 × 54.9 mm
ESP32WifiAisTempVolt2
AK-Homberger/NMEA2000WifiGateway-with-ESP32
This repository shows how to build a NMEA2000 WiFi Gateway with voltage and temperature alarms.
18 parts94GPL-3.0
Questions
What parts does the MK1 use?
15 parts, built around the HLK-20M05 and DS18B20. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MK1 KiCad files?
From the emanuel-eckstein/VerteilteSysteme repository on GitHub, at the commit this page was made from: the board is electronicsCircuit/MK1/MK1.kicad_pcb and its schematic electronicsCircuit/MK1/MK1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MK1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask emanuel-eckstein before reusing the design.