2 layers88.4 × 25.4 mm
2 layers
DETECTOR DE INCENDIO
Tinex3/Control-De-Incendio-Innovacion- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 59
- Pads
- 119
- Tracks, vias
- 205, 0
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 18 May 2024
- Updated
- 28 May 2024
Overview
DETECTOR DE INCENDIO is an open-source printed circuit board by Tinex3, from the Tinex3/Control-De-Incendio-Innovacion repository on GitHub. It is a 2-layer board with 27 parts on 59 nets, routed with 205 tracks and 0 vias.
It is built around the HLK-20M05, DHT11 and AMS1117-3.3, with the BCX56 and SM4007 among its other parts. Its parts include 9 connectors, 5 resistors, 3 diodes, 2 capacitors and 2 transistors.
Main components
5
HLK-20M05
插件0.1W 100mVp-p 20W 22.5mm 32mm 3kV 4A 56mm 5V 70V~350V 82% 85VAC~264VAC Short Circuit Protection、Over Current Protection DIP,56x32mm AC-DC Power Modules ROHSHI-LINKAC-DC Power Modules
DHT11
SIP-4-20℃~+60℃ 1mA 3.3V~5.5V 5%RH~95%RH ±2℃ ±5%RH SIP-4 Temperature and Humidity Sensor ROHSAosong ElecTemperature And Humidity Sensor
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
BCX56
SOT-89-3Lhfe=100~250Jiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
SM4007
MELFMELF Diodes - General Purpose ROHSYONGYUTAIDiodes - General Purpose
README
README.mdgit clone --recurse-submodules -j8 git@github.com:Tinex3/Control-De-Incendio-Innovacion.gitParts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 330 | Resistor_SMD:R_1206_3216Metric | R1, R2, R3 |
| 2 | 100n | Capacitor_SMD:C_1206_3216Metric | C1, C2 |
| 2 | 1k | Resistor_SMD:R_1206_3216Metric | R4, R5 |
| 2 | BCX56 | Package_TO_SOT_SMD:SOT-89-3 | Q3, Q4 |
| 2 | Conn_01x03 | Connector_Molex:Molex_KK-396_5273-03A_1x03_P3.96mm_Vertical | J2, J3 |
| 2 | DHT11 | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J4, J7 |
| 2 | FINDER-36.11 | Relay_THT:Relay_SPDT_Finder_36.11 | K3, K4 |
| 2 | SM4007 | Diode_SMD:D_MELF | D4, D5 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | GPS | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J11 |
| 1 | HLK-20M05 | Converter_ACDC:Converter_ACDC_Hi-Link_HLK-20Mxx | PS2 |
| 1 | LED_RBKG | LED_THT:LED_D5.0mm-4_RGB | D2 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Philmore:TerminalBlock_Philmore_TB132_1x02_P5.00mm_Horizontal | J1 |
| 1 | Sensor De Calidad De Aire | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J8 |
| 1 | Temp | Connector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J5 |
| 1 | Ultra Sonido | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J10 |
| 1 | Wireless_Stick_V3 | Heltec:Wireless_Stick_Lite_V3 | MOD1 |
Similar boards
- 2 layers
MK1
emanuel-eckstein/VerteilteSysteme
Alles rund um die Belegarbeit Verteilte Systeme, MQTT und RESTful Web Service
15 parts - 2 layers111.8 × 60 mm
- 2 layers278 × 135 mm
- 2 layers165.2 × 114.6 mm
Web controlled relay board v2.0
ambadran/Free-Lance-Projects
repo for holding my free lance work
71 parts - 2 layers
- 2 layers71.3 × 25.4 mm
- 2 layers149.9 × 121.9 mm
Questions
What parts does the DETECTOR DE INCENDIO use?
27 parts, built around the HLK-20M05, DHT11, AMS1117-3.3 and BCX56. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DETECTOR DE INCENDIO KiCad files?
From the Tinex3/Control-De-Incendio-Innovacion repository on GitHub, at the commit this page was made from: the board is PCB/dETECTOR DE INCENDIO/dETECTOR DE INCENDIO.kicad_pcb and its schematic PCB/dETECTOR DE INCENDIO/ControlRele.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the DETECTOR DE INCENDIO design in my own project?
Its repository states no licence, so its author keeps all rights: ask Tinex3 before reusing the design.