
LEDx16 board
tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

Files for my master's final project
Access kb is an open-source printed circuit board by elpekenin, from the elpekenin/access_kb repository on GitHub. It is a 2-layer board of 185.7 × 301.4 mm with 294 parts on 242 nets, routed with 1,452 tracks and 216 vias.
It is built around the 74HC595. Its parts include 72 capacitors, 60 resistors, 58 diodes, 58 switches and 11 connectors. It belongs with the RP2040 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 72 | C_Small | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23 +56 |
| 60 | R_Small | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R0, R1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22 +44 |
| 58 | MX_SK6812MINI-E | marbastlib-mx:LED_MX_6028R | LED0, LED1, LED2, LED10, LED11, LED12, LED13, LED14, LED15, LED16, LED17, LED18, LED19, LED20, LED21, LED22 +42 |
| 58 | MX_SW | marbastlib-mx:SW_MX_1u | SW0, SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22 +42 |
| 12 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4, H5, H6, H7, H8, H9, H10, H11, H12 |
| 10 | MC74HC589ADR2G | Package_SO:SO-16_3.9x9.9mm_P1.27mm | UROW1, UROW2, UROW3, UROW4, UROW5, UROW6, UROW7, UROW8, UROW9, UROW10 |
| 4 | 74HC595 | Package_SO:SO-16_3.9x9.9mm_P1.27mm | USIPO0, USIPO1, USIPO2, USIPO3 |
| 4 | Conn_02x03_Top_Bottom | Connector_PinSocket_2.54mm:PinSocket_2x03_P2.54mm_Vertical | J3, J4, J6, J8 |
| 2 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | AudioJack4 | Connector_Audio:Jack_3.5mm_KoreanHropartsElec_PJ-320D-4A_Horizontal | J1, J2 |
| 2 | Conn_01x16_Female | Connector_PinSocket_2.54mm:PinSocket_1x16_P2.54mm_Vertical | J5, J7 |
| 2 | Conn_02x02_Top_Bottom | Connector_PinSocket_2.54mm:PinSocket_2x02_P2.54mm_Vertical | J9, J10 |
| 2 | LOGO | LOGO | G***, G*** |
| 2 | Pico | MCU_RaspberryPi_and_Boards:RPi_Pico_SMD_TH | U1, U2 |
| 1 | Conn_01x10_Female | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J11 |
| 1 | IL91874 | Connector_PinSocket_2.54mm:PinSocket_1x13_P2.54mm_Vertical | U5 |
| 1 | ILI9163 | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | U3 |
| 1 | ILI9341_TS | Connector_PinSocket_2.54mm:PinSocket_1x14_P2.54mm_Vertical | U4 |

tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

ChrisChrisLoLo/beyblock20
The magnetic, modular, 20-key macropad that can join together to form an ortholinear board

slu4coder/Minimal-64x4-Home-Computer
My DIY TTL home computer with VGA and PS/2 and 4x the processing power of a Commodore C64 or Apple II.

electroniceel/protoboard
Advanced protoboard layout with 1.27mm pitch for smd parts

TobleMiner/DC-UPS
A small DC UPS, designed to keep small appliances like consumer network equipment running during power outages



It measures 185.7 × 301.4 mm and has 2 copper layers, 1.6 mm thick.
294 parts, built around the 74HC595. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the elpekenin/access_kb repository on GitHub, at the commit this page was made from: the board is hardware/kicad/kicad.kicad_pcb and its schematic hardware/kicad/kicad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask elpekenin before reusing the design.