2 layers10 × 98 mm
WS2813 single side conn x14
ElessarCuthalion/Modules
Small PCB modules: Sensors, Chargers, etc...
56 parts
2 layers43 × 17.3 mm
MP2611
ElessarCuthalion/ModulesSmall PCB modules: Sensors, Chargers, etc...
- Size
- 43 × 17.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 33
- Nets
- 23
- Pads
- 103
- Tracks, vias
- 469, 42
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 25 Jan 2018
- Updated
- 1 Nov 2024
Overview
MP2611 is an open-source printed circuit board by ElessarCuthalion, from the ElessarCuthalion/Modules repository on GitHub. It is a 2-layer board of 43 × 17.3 mm with 33 parts on 23 nets, routed with 469 tracks and 42 vias.
It is built around the IRLML2502 and MP2611GL-Z. Its parts include 9 resistors, 7 capacitors and 1 inductor.
Main components
2README
README.mdModules
Small PCB modules: Sensors, Chargers, etc...
Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 1k | Resistors:RES0603 | R1, R2, R3 |
| 2 | 0,1r | Resistors:RES1206 | R7, R8 |
| 2 | 0,1uF | Capacitors:CAP0603 | C1, C7 |
| 2 | HOLE_METALLED | PCB_details:Hole_for_M3_small | HOLE1, HOLE2 |
| 1 | +Vin | Connectors:PLS-1Rnd | XP1 |
| 1 | -Vin | Connectors:PLS-1Rnd | XP2 |
| 1 | 0,15uF | Capacitors:CAP0805 | C5 |
| 1 | 100k | Resistors:RES0603 | R9 |
| 1 | 10k/NC | Resistors:RES0603 | R5 |
| 1 | 1uF | Capacitors:CAP0603 | C4 |
| 1 | 2,2uH | Inductors:5D28 | L1 |
| 1 | 22uF | Capacitors:CAP0805 | C6 |
| 1 | 22uF/4,7uF | Capacitors:CAP0805 | C2 |
| 1 | 33k | Resistors:RES0805 | R6 |
| 1 | 4,7uF/22uF | Capacitors:CAP0805 | C3 |
| 1 | 8,2k | Resistors:RES0603 | R4 |
| 1 | Eldalim | Graphics:Eldalim_17x15 | Label1 |
| 1 | Green | LEDs:LED0603 | HL1 |
| 1 | IRLML2502 | SOT:SOT23-3 | VT1 |
| 1 | Li-ion | Connectors:PLS-2 | GB1 |
| 1 | Load | Connectors:PLS-1Rnd | XP4 |
| 1 | MP2611 | QFN,_DFN,_LGA:DFN14_3x4 | DA1 |
| 1 | NTC | Connectors:PLS-2 | XP3 |
| 1 | Red | LEDs:LED0603 | HL2 |
| 1 | USB | AC | PCB_details:FuseSolder_x2_0603 | fuse1 |
| 1 | Yellow | LEDs:LED0603 | HL3 |
| 1 | mcro-USB | Connectors:USB-micro_B+Hole | XS2 |
| 1 | mini-USB | Connectors:USB-mini_B | XS1 |
Questions
How big is the MP2611 PCB?
It measures 43 × 17.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MP2611 use?
33 parts, built around the IRLML2502 and MP2611GL-Z. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MP2611 KiCad files?
From the ElessarCuthalion/Modules repository on GitHub, at the commit this page was made from: the board is Charger_MP2611/MP2611.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the MP2611 design in my own project?
Its repository states no licence, so its author keeps all rights: ask ElessarCuthalion before reusing the design.
More from ElessarCuthalion/Modules
12- 2 layers38 × 18 mm
- 2 layers46.5 × 17.5 mm
- 2 layers50.3 × 17.5 mm
- 2 layers31.5 × 15 mm
- 2 layers40 × 20 mm
- 2 layers25 × 15 mm
- 2 layers20 × 14.3 mm
- 2 layers72 × 4 mm
- 2 layers55 × 4 mm
- 2 layers22 × 16 mm
- 2 layers21.8 × 14 mm
Similar boards
- 4 layers60 × 28 mm
- 8 layers120 × 60 mm
DFTBoard
juliancoy/zynqPCB
An 8-layer board in Kicad built upon Xilinx Zynq Chip. Includes sound output, HDMI, DDR3, and Arduino Uno style header for screen connection
299 parts75MIT - 2 layers92.5 × 82.8 mm
Rifle and sensors
DAlexis/caustic-lasertag-system
Caustic project is a full-featured indoor and outdoor lasertag system
268 parts16 - 4 layers122.2 × 115.1 mm
Scan controller kicad
fwachsmuth/Filmkorn-Raw-Scanner
The Filmkorn Raw Scanner, turning 8mm and 16mm films into lossless 12-bit CinemaDNG
170 parts13MIT - 2 layers68 × 81.5 mm
- 2 layers42.3 × 24.5 mm
- 2 layers158 × 34 mm
- 2 layers30.5 × 119.1 mm
PlantWatering
MadsBornebusch/PlantFriends
Soil moisture sensor and plant watering with an ESP8266
19 parts6GPL-3.0