
Scd30-control board
Elektrochecker/SCD30-environment-sensor
ATmega328p firmware for interfacing with a sensirion SCD30 sensor via i²c

ATmega328p firmware for interfacing with a sensirion SCD30 sensor via i²c
Display is an open-source printed circuit board by Elektrochecker, from the Elektrochecker/SCD30-environment-sensor repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 91 × 68 mm with 19 parts on 22 nets, routed with 67 tracks and 0 vias.
Its parts include 10 capacitors, 3 resistors, 1 IC and 1 connector. It belongs with the lEDs and displays boards of this library.
compile for AVR
./avr-compile.sh main.cflash with avrdude
avrdude -v -c stk500 -p m328p -P /dev/ttyACM0 -U flash:w:build/main.hex:i| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 1uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1, C2, C3, C4, C5, C6, C7, C8, C9 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4 |
| 3 | 52 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3 |
| 1 | 10nF | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C10 |
| 1 | Conn_01x08 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J1 |
| 1 | EA_DOGL128X-6 | Display:EA_DOGL128-6 | U1 |

Elektrochecker/SCD30-environment-sensor
ATmega328p firmware for interfacing with a sensirion SCD30 sensor via i²c


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

polpo/picogus
Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support


nkitanov/iaq_board
IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality


Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)

zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube
It measures 91 × 68 mm and has 2 copper layers, 1.6 mm thick.
19 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Elektrochecker/SCD30-environment-sensor repository on GitHub, at the commit this page was made from: the board is pcb/display/display.kicad_pcb and its schematic pcb/display/display.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).