
Display
Elektrochecker/SCD30-environment-sensor
ATmega328p firmware for interfacing with a sensirion SCD30 sensor via i²c

ATmega328p firmware for interfacing with a sensirion SCD30 sensor via i²c
Scd30-control board is an open-source printed circuit board by Elektrochecker, from the Elektrochecker/SCD30-environment-sensor repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 91 × 68 mm with 34 parts on 38 nets, routed with 294 tracks and 44 vias.
It is built around the ATMEGA328P-PU. Its parts include 9 capacitors, 9 resistors, 5 connectors, 4 ICs and 2 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
compile for AVR
./avr-compile.sh main.cflash with avrdude
avrdude -v -c stk500 -p m328p -P /dev/ttyACM0 -U flash:w:build/main.hex:i| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R4, R5, R6, R7 |
| 4 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R8, R9, R10 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4 |
| 2 | 100nF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C6 |
| 2 | 1uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C7, C8 |
| 2 | 22pF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C4, C5 |
| 2 | LED_Small | LED_THT:LED_D3.0mm | D1, D2 |
| 1 | 10nF | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C2 |
| 1 | 330uF | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C3 |
| 1 | ATmega328P-P | Package_DIP:DIP-28_W7.62mm | U2 |
| 1 | C_Polarized | Capacitor_THT:CP_Radial_D8.0mm_P5.00mm | C9 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | Conn_01x08 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J1 |
| 1 | Crystal_Small | Crystal:Crystal_HC18-U_Vertical | Y1 |
| 1 | ISP | Connector_IDC:IDC-Header_2x03_P2.54mm_Vertical | J5 |
| 1 | LP2950-3.3_TO92 | Package_TO_SOT_THT:TO-92_HandSolder | U4 |
| 1 | UART | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J4 |
| 1 | ~ | footprint_library:clock&memory_module | U1 |
| 1 | ~ | footprint_library:SCD30 | U3 |

Elektrochecker/SCD30-environment-sensor
ATmega328p firmware for interfacing with a sensirion SCD30 sensor via i²c

zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube

coseyfannitutti/discipad
17-key numpad assembled with only through hole components, including usb type-c

matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer

coseyfannitutti/romeo
Staggered 40% keyboard pcb that can be assembled with only through hole components, including USB Type-C

mattybrad/drumkid
Version 4 was the first successful working design, with full code, schematics, Gerbers, etc available on GitHub.


leomil72/LM80C
A Z80-based homebrew computer withTMS9918, AY-3-8910, Z80 CTC, Z80 PIO, and Z80 SIO

It measures 91 × 68 mm and has 2 copper layers, 1.6 mm thick.
34 parts, built around the ATMEGA328P-PU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Elektrochecker/SCD30-environment-sensor repository on GitHub, at the commit this page was made from: the board is pcb/scd30-control-board/scd30-control-board.kicad_pcb and its schematic pcb/display/display.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).