2 layers57 × 55.2 mm
LogicAnalyzer
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
10 parts5.1kGPL-3.0
2 layers59.7 × 22.9 mm
FingerPrint Sensor Connector
ELEG-CPEG398/Laundry-NotifierArduino Code for an Adafruit HUZZAH ESP8266
- Size
- 59.7 × 22.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 32
- Pads
- 48
- Tracks, vias
- 36, 0
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 5 Apr 2024
- Updated
- 16 May 2024
Overview
FingerPrint Sensor Connector is an open-source printed circuit board by ELEG-CPEG398, from the ELEG-CPEG398/Laundry-Notifier repository on GitHub. It is a 2-layer board of 59.7 × 22.9 mm with 10 parts on 32 nets, routed with 36 tracks and 0 vias.
It belongs with the sensors and measurement boards and the ESP8266 boards of this library.
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | Conn_01x01 | Connector_Wire:SolderWire-0.75sqmm_1x01_D1.25mm_OD2.3mm | B1, Blk1, G1, O1, P1, R1, W1, Y1 |
| 1 | Adafruit_Feather_HUZZAH_ESP8266 | Module:Adafruit_Feather_WithMountingHoles | A1 |
| 1 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | Pinheader1 |
Questions
How big is the FingerPrint Sensor Connector PCB?
It measures 59.7 × 22.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the FingerPrint Sensor Connector use?
10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FingerPrint Sensor Connector KiCad files?
From the ELEG-CPEG398/Laundry-Notifier repository on GitHub, at the commit this page was made from: the board is FingerPrint-Sensor_Connector/FingerPrint-Sensor_Connector.kicad_pcb and its schematic FingerPrint-Sensor_Connector/FingerPrint-Sensor_Connector.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the FingerPrint Sensor Connector design in my own project?
Its repository states no licence, so its author keeps all rights: ask ELEG-CPEG398 before reusing the design.
Similar boards
- 2 layers32.2 × 15.4 mm
Protector
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
10 parts4.3kMIT - 2 layers14.4 × 10.1 mm
Q3Q SWAB A1-00 Temperature + Test Points + OPT3001
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
10 parts2.1k - 2 layers26 × 18 mm
- 2 layers44.3 × 30.5 mm
Lime2-SATA RevA
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
10 parts1.5k - 2 layers150 × 50 mm
Breakout 55pin 963063-15-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
10 parts1.2k - 2 layers17.8 × 43.2 mm
Nano Adapter
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
10 parts1.1kGPL-3.0 - 2 layers53.9 × 23.2 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
10 parts1kGPL-3.0