2 layers59.7 × 127.3 mm
Wasserkocher
dmatscheko/water_kettle
ESP32-S3 running ESPHome on a custom KiCad PCB for the base of a SEVERIN WK 3479 water kettle
67 parts
2 layers50.8 × 50.8 mm
Angst
electrodonkey/angstDIY camera gimbal
- Size
- 50.8 × 50.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 90
- Nets
- 89
- Pads
- 326
- Tracks, vias
- 902, 228
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 15 Apr 2019
- Updated
- 2 May 2019
Overview
Angst is an open-source printed circuit board by electrodonkey, from the electrodonkey/angst repository on GitHub. It is a 2-layer board of 50.8 × 50.8 mm with 90 parts on 89 nets, routed with 902 tracks and 228 vias.
It is built around the STSPIN233, M24C02-RDW6T and TLV1117-33DCY, with the STPS2L30A, IRLML6401TRPBF and USBLC6-4SC6 among its other parts. Its parts include 32 resistors, 26 capacitors, 9 connectors, 7 ICs and 5 diodes. It belongs with the STM32 boards of this library.
Main components
6
STSPIN233
QFN-16-EP(3x3)-40℃~+150℃ 1.8V~10V 3 400mΩ 80nA Three Phase QFN-16-EP(3x3) Brushless DC (BLDC) Motor Driver ROHSSTMicroelectronicsGate Drivers
M24C02-RDW6T
TSSOP-8TSSOP-8 EEPROMSTMicroelectronicsEEPROMTLV1117-33DCY
UncategorisedTexas Instruments
STPS2L30A
SMA(DO-214AC)1 Independent 200uA@30V 2A 30V 450mV@2A 75A SMA(DO-214AC) Schottky Diodes ROHSSTMicroelectronicsSchottky Diodes
IRLML6401TRPBF
SOT-23-55℃~+150℃ 1 P-Channel 1.3W 125pF 12V 15nC@5V 180pF 4.3A 50mΩ@4.5V 830pF 950mV SOT-23 MOSFETs ROHSInfineon TechnologiesMOSFETs
USBLC6-4SC6
SOT-23-6-55℃~+125℃ 0.3pF 15V 300W@8/20us 4.7A@8/20us 5V 6V 80nA ESD Four channels IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Unidirectional SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
README
README.mdANGST - Angle seNsor Gimbal SysTem
Master thesis project in Advanced Microelectronics
Parts
90| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C16, C24, C25 |
| 9 | 10n | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C8, C9, C10, C11, C13, C15, C17, C20, C21 |
| 6 | 18k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R13, R17, R19, R24, R26, R30 |
| 4 | 10k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R11, R14, R20, R27 |
| 4 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C14, C19, C22, C26 |
| 3 | 1 0.5W | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | RSH1, RSH2, RSH3 |
| 3 | 100 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R12, R18, R25 |
| 3 | 1k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R16, R23, R29 |
| 3 | 22 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R3, R4, R7 |
| 3 | 22uF 20V | Capacitor_Tantalum_SMD:CP_EIA-1608-08_AVX-J_Pad1.25x1.05mm_HandSolder | C12, C18, C23 |
| 3 | 3k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R15, R21, R28 |
| 3 | 4k7 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R8, R9, R10 |
| 3 | Conn_01x02_Male | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J3, J7, J9 |
| 3 | Conn_01x03 | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J4, J5, J6 |
| 3 | STSPIN233 | digikey-footprints:VFQFN-16-1EP_3x3mm | U3, U4, U6 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R5 |
| 2 | 47k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R31, R32 |
| 2 | STPS2L30 | Diode_SMD:D_SMA | D4, D5 |
| 1 | 1k5 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R2 |
| 1 | 2k2 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R22 |
| 1 | 560 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R6 |
| 1 | BK1608HS601-T | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L1 |
| 1 | Conn_01x04_Male | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J8 |
| 1 | Conn_02x05_Odd_Even | Connector_Harwin:Harwin_Gecko-G125-FVX1005L0X_2x05_P1.25mm_Vertical | J2 |
| 1 | Crystal_GND24 | Crystal:Crystal_SMD_0603-4Pin_6.0x3.5mm_HandSoldering | Y1 |
| 1 | IRLML6401TRPBF | digikey-footprints:SOT-23-3 | Q1 |
| 1 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2 |
| 1 | M24C02-RDW | Package_SO:TSSOP-8_4.4x3mm_P0.65mm | U2 |
| 1 | SMAJ8.5CALFCT-ND | Diode_SMD:D_SMA | D3 |
| 1 | STM32F303RETx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_EVPBF | SW1 |
| 1 | TLV1117-33 | digikey-footprints:SOT-223 | U7 |
| 1 | TLV1117-50 | digikey-footprints:SOT-223 | U5 |
| 1 | USBLC6-4SC6 | digikey-footprints:SOT23-6L | D1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex-105017-0001 | J1 |
The 86 most common of 90 parts.
Questions
How big is the Angst PCB?
It measures 50.8 × 50.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Angst use?
90 parts, built around the STSPIN233, M24C02-RDW6T, TLV1117-33DCY and STPS2L30A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Angst KiCad files?
From the electrodonkey/angst repository on GitHub, at the commit this page was made from: the board is hardware/pcb/angst.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Angst design in my own project?
Its repository states no licence, so its author keeps all rights: ask electrodonkey before reusing the design.
Similar boards
- 2 layers91.9 × 38.8 mm
STM PCB
pixelpioneeradhil/pcbstm32
KRONOS is a compact 2-layer STM32F401RE development board designed for embedded-system development, programming, debugging, and general-purpose applications.
48 parts - 2 layers
Custom Board F303 Rev0.0
Will-Armentrout/STM32-Avionics
The goal of this Repo was to complete sensor, STM32 Hardware Integration, telemetry display testing in preparation for creating a Custom Avionics PCB using the STM32 framework.
3 parts - 2 layers81 × 60 mm
Psu
kajusK/Pneumobil
Control and telemetry system for BUT Falcon pneumobil for Aventics Pneumobil competition
108 parts - 2 layers78.1 × 14.1 mm
- 4 layers121.9 × 44.4 mm
- 2 layers74.8 × 49.8 mm
BMW BT
Christian-Ristevski/E9X-CAN-BT
Using BM83 and MCP2515 to add CAN-bus connected bluetooth audio to BMW E9X series
95 parts3 - 2 layers31.5 × 23.3 mm
