

Coupe de France de Robotique Junior 2026
- Size
- 76.5 × 48.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 16
- Nets
- 40
- Pads
- 86
- Tracks, vias
- 110, 11
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 13 Sep 2025
- Updated
- 27 Sep 2026
Overview
Pami is an open-source printed circuit board by electrobot-fr, from the electrobot-fr/coupe2026 repository on GitHub. It is a 2-layer board of 76.5 × 48.5 mm with 16 parts on 40 nets, routed with 110 tracks and 11 vias.
Its parts include 3 ICs, 2 capacitors and 2 connectors. It belongs with the ESP32 and RISC-V boards of this library.
README
README.mdCoupe de France de Robotique Junior 2026
Compilation
Chaque sous-dossier est un projet PlatformIO indépendant. Le Makefile à la racine fournit des raccourcis.
Cartes standards
make base_roulante # compiler
make upload-base_roulante # compiler + flasher
make all # compiler toutes les cartes (sauf PAMI)
make clean # nettoyer toutes les cartesCartes disponibles : base_roulante, carte_actionneurs, emetteur, recepteur, telecommande.
PAMI (5 variantes)
Le code du PAMI est commun mais le comportement est sélectionné à la compilation par le flag -DPAMI_VARIANT=N. Une cible Makefile existe par variante :
| Cible | Variante | Description |
|---|---|---|
make pami-ninja | NINJA | Séquence longue avec accélérations/décélérations |
make pami-1 | PAMI1 | Séquence courte (2 virages) |
make pami-2 | PAMI2 | Délai 6s puis avance + virage |
make pami-3 | PAMI3 | Délai 3s puis longue avance |
make pami-4 | PAMI4 | Délai 8.5s puis ligne droite |
Pour flasher, préfixer par upload- :
make upload-pami-ninja
make upload-pami-1
# etc.⚠️ Compiler directement avec cd pami && pio run échoue : PAMI_VARIANT n'est pas défini et le code lève un #error. Toujours passer par le Makefile.
Décompte initial (DECOMPTE_INITIAL)
Chaque variante a une valeur de décompte par défaut (en secondes) :
| Variante | Décompte par défaut |
|---|---|
pami-ninja | 5 s |
pami-1 … pami-4 | 87 s |
Pour surcharger ponctuellement la valeur (sans modifier le code), passer DECOMPTE=<secondes> à make :
make pami-1 DECOMPTE=30 # compile pami-1 avec un décompte de 30 s
make upload-pami-ninja DECOMPTE=10 # flashe ninja avec un décompte de 10 sLa variable DECOMPTE n'est utilisée que si elle est définie ; sinon la valeur par défaut de la variante est utilisée.
Ajouter une nouvelle variante de PAMI
- Ajouter un
#definedanspami/src/main.cpp(ex.#define PAMI5 5) - Ajouter le bloc
#if PAMI_VARIANT == PAMI5 ... #endifavec la séquence - Ajouter la variante dans le
Makefile:- Ajouter
5àPAMI_VARIANTS - Ajouter
PAMI_FLAG_5 = 5
- Ajouter
Parts
16| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | C_Polarized | Capacitor_THT:CP_Radial_D8.0mm_P5.00mm | C1, C2 |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2 |
| 2 | Servo | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | Servo, Servo |
| 1 | Arret urgence | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | Arret Urgence |
| 1 | ESP32-C3_SUPERMINI_TH | footprints:MODULE_ESP32-C3_SUPERMINI | U1 |
| 1 | Ecran OLED | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | Ecran |
| 1 | LP E10 7.4V | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | Batterie |
| 1 | Moteur 1 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | Moteur 2 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | TMC2209 Moteur 1 | footprints:MODULE_TMC2209_SILENTSTEPSTICK | U2 |
| 1 | TMC2209 Moteur 2 | footprints:MODULE_TMC2209_SILENTSTEPSTICK | U3 |
| 1 | Tirette | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | Tirette |
| 1 | Voltage Regulator | footprints:LM2596 | VR1 |
More from electrobot-fr/coupe2026
1- 2 layers136 × 55.5 mm

Similar boards
- 2 layers140.5 × 30 mm

Type e
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
16 parts3kApache-2.0 - 2 layers41.4 × 14.5 mm

U2f zero
conorpp/u2f-zero
U2F USB token optimized for physical security, affordability, and style
16 parts2.4k - 2 layers77.5 × 33.7 mm

Breakout 72pin 1123038-2-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
16 parts1.2k - 2 layers122 × 37 mm

V0-UmbilicalBoard
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
16 parts1.1kGPL-3.0 - 2 layers152 × 57.6 mm

Videoslotadapter
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
16 parts1kGPL-3.0 - 2 layers36 × 63.4 mm

Smart ringfinal layout
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
16 parts915 - 2 layers60 × 40 mm

- 2 layers21.1 × 26.9 mm

Questions
How big is the Pami PCB?
It measures 76.5 × 48.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pami use?
16 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pami KiCad files?
From the electrobot-fr/coupe2026 repository on GitHub, at the commit this page was made from: the board is carte_pami/pami.kicad_pcb and its schematic carte_moteurs/carte_moteurs.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pami design in my own project?
Its repository states no licence, so its author keeps all rights: ask electrobot-fr before reusing the design.