

Carte moteurs
Coupe de France de Robotique Junior 2026
- Size
- 136 × 55.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 24
- Nets
- 90
- Pads
- 164
- Tracks, vias
- 169, 12
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 13 Sep 2025
- Updated
- 27 Sep 2026
Overview
Carte moteurs is an open-source printed circuit board by electrobot-fr, from the electrobot-fr/coupe2026 repository on GitHub. It is a 2-layer board of 136 × 55.5 mm with 24 parts on 90 nets, routed with 169 tracks and 12 vias.
Its parts include 5 ICs, 5 connectors and 4 capacitors. It belongs with the ESP32 and RISC-V boards of this library.
README
README.mdCoupe de France de Robotique Junior 2026
Compilation
Chaque sous-dossier est un projet PlatformIO indépendant. Le Makefile à la racine fournit des raccourcis.
Cartes standards
make base_roulante # compiler
make upload-base_roulante # compiler + flasher
make all # compiler toutes les cartes (sauf PAMI)
make clean # nettoyer toutes les cartesCartes disponibles : base_roulante, carte_actionneurs, emetteur, recepteur, telecommande.
PAMI (5 variantes)
Le code du PAMI est commun mais le comportement est sélectionné à la compilation par le flag -DPAMI_VARIANT=N. Une cible Makefile existe par variante :
| Cible | Variante | Description |
|---|---|---|
make pami-ninja | NINJA | Séquence longue avec accélérations/décélérations |
make pami-1 | PAMI1 | Séquence courte (2 virages) |
make pami-2 | PAMI2 | Délai 6s puis avance + virage |
make pami-3 | PAMI3 | Délai 3s puis longue avance |
make pami-4 | PAMI4 | Délai 8.5s puis ligne droite |
Pour flasher, préfixer par upload- :
make upload-pami-ninja
make upload-pami-1
# etc.⚠️ Compiler directement avec cd pami && pio run échoue : PAMI_VARIANT n'est pas défini et le code lève un #error. Toujours passer par le Makefile.
Décompte initial (DECOMPTE_INITIAL)
Chaque variante a une valeur de décompte par défaut (en secondes) :
| Variante | Décompte par défaut |
|---|---|
pami-ninja | 5 s |
pami-1 … pami-4 | 87 s |
Pour surcharger ponctuellement la valeur (sans modifier le code), passer DECOMPTE=<secondes> à make :
make pami-1 DECOMPTE=30 # compile pami-1 avec un décompte de 30 s
make upload-pami-ninja DECOMPTE=10 # flashe ninja avec un décompte de 10 sLa variable DECOMPTE n'est utilisée que si elle est définie ; sinon la valeur par défaut de la variante est utilisée.
Ajouter une nouvelle variante de PAMI
- Ajouter un
#definedanspami/src/main.cpp(ex.#define PAMI5 5) - Ajouter le bloc
#if PAMI_VARIANT == PAMI5 ... #endifavec la séquence - Ajouter la variante dans le
Makefile:- Ajouter
5àPAMI_VARIANTS - Ajouter
PAMI_FLAG_5 = 5
- Ajouter
Parts
24| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | C_Polarized | Capacitor_THT:CP_Radial_D8.0mm_P5.00mm | C1, C2, C3, C4 |
| 2 | Conn_01x02_Socket | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | SERIE_IN, SERIE_OUT |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2 |
| 1 | Arret urgence | Connector_AMASS:AMASS_XT30U-F_1x02_P5.0mm_Vertical | Arret Urgence |
| 1 | BAT_IN | Connector_AMASS:AMASS_XT30U-F_1x02_P5.0mm_Vertical | BAT IN |
| 1 | Conn_01x02_Socket | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW_WIFI_CABLE |
| 1 | Conn_01x02_Socket | Connector_AMASS:AMASS_XT30U-F_1x02_P5.0mm_Vertical | BAT OUT |
| 1 | ESP32-C3_SUPERMINI_TH | footprints:MODULE_ESP32-C3_SUPERMINI | U1 |
| 1 | ESP32_DevKit_V1_DOIT_30GPIOs | PCM_SL_Development_Boards:DOIT_ESP32_DEVKIT_30Pins | A1 |
| 1 | Ecran OLED | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J1 |
| 1 | Moteur 1 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | Moteur 2 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | Moteur 3 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J10 |
| 1 | Moteur 4 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J9 |
| 1 | TMC2209 Moteur 1 | footprints:MODULE_TMC2209_SILENTSTEPSTICK | U2 |
| 1 | TMC2209 Moteur 2 | footprints:MODULE_TMC2209_SILENTSTEPSTICK | U3 |
| 1 | TMC2209 Moteur 3 | footprints:MODULE_TMC2209_SILENTSTEPSTICK | U5 |
| 1 | TMC2209 Moteur 4 | footprints:MODULE_TMC2209_SILENTSTEPSTICK | U4 |
| 1 | Voltage Regulator | footprints:LM2596 | VR1 |
More from electrobot-fr/coupe2026
1- 2 layers76.5 × 48.5 mm

Similar boards
- 2 layers56 × 65 mm

SeaTalk1
dotnet/iot
This repo includes .NET Core implementations for various IoT boards, chips, displays and PCBs.
24 parts2.4kMIT - 2 layers26.2 × 45.5 mm

PL18 multiprotocol
pascallanger/DIY-Multiprotocol-TX-Module
Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.
24 parts1.9kGPL-3.0 - 2 layers58 × 35.5 mm

- 2 layers144 × 58 mm

Breakout 80pin 1393476-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
24 parts1.2k - 2 layers21.6 × 19.5 mm

Micron Logo LED
DraftShift/StealthChanger
Tool changing system for Vorons and other front mount printer motion systems, not just stealthburner.
24 parts1.2kGPL-3.0 - 2 layers158 × 11 mm

Rainbow Matchstick
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
24 parts1.1kGPL-3.0 - 2 layers85.6 × 54 mm

TRACED wio1262-carrier
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
24 parts915 - 2 layers36 × 20 mm

Questions
How big is the Carte moteurs PCB?
It measures 136 × 55.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Carte moteurs use?
24 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Carte moteurs KiCad files?
From the electrobot-fr/coupe2026 repository on GitHub, at the commit this page was made from: the board is carte_moteurs/carte_moteurs.kicad_pcb and its schematic carte_moteurs/carte_moteurs.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Carte moteurs design in my own project?
Its repository states no licence, so its author keeps all rights: ask electrobot-fr before reusing the design.