
Iaq device
nkitanov/iaq_board
IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality

Very basic bedside digital clock using the NTP8266 to sync the time using NTP
WiFi LCD clock is an open-source printed circuit board by electricant, from the electricant/ESP8266_NTP_clock repository on GitHub, published under the Unlicense licence. It is a 2-layer board of 80 × 36 mm with 11 parts on 13 nets, routed with 56 tracks and 76 vias.
It is built around the WEMOS D1 MINI. Its parts include 3 capacitors, 3 resistors, 1 IC and 1 switch. It belongs with the lEDs and displays and radio and wireless boards and the ESP8266 boards of this library.
Very basic bedside digital clock using the NTP8266 to sync the time using NTP.
This started as a whish list and expanded during development. Since this is an open-ended project this list may grow. Never settle!
Required libraries:
The code uses a local, improved version of the EasyNTPClient library. It is available as a git submodule.
There's not much to it actually. Just a PCB the same size of the display. The display board and the control PCB are sandwiched together using M2.5 hex standoffs. The display conencts to the mainboard using 2.54mm headers.
3D rendering of the PCB:

Prototype (I swear it is not a bomb officer):


| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100n | universal_tht_smd:universal_cap | C1, C2, C3 |
| 1 | 1602_display | pol:1602_lcd | LCD1 |
| 1 | 220 | universal_tht_smd:universal_res | R3 |
| 1 | 33k | Potentiometer_THT:Potentiometer_Piher_PT-6-V_Vertical | RV1 |
| 1 | DNI | universal_tht_smd:universal_res | R1 |
| 1 | R_PHOTO | OptoDevice:R_LDR_4.9x4.2mm_P2.54mm_Vertical | R2 |
| 1 | SW_LIGHT | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | WeMos_D1_mini | Module:WEMOS_D1_mini_light | U1 |
| 1 | a_black_cat | pol:a_black_cat | EA1 |

nkitanov/iaq_board
IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality

bitfixer/bf-romulator
Romulator - RAM/ROM replacement and debug for 6502 CPU systems

alcar21/WemosEM
Cheap power monitor (STC013) with Home Assistant Discover and Wemos D1 Mini / PRO (esp8266)

kholia/Easy-Digital-Beacons-v1
A simple and easy Arduino / Pi Pico / ESP8266-powered WSPR, FT8, and FT4 beacon system which uses NTP + DS3231 RTC for timing. Super extensible! Now comes with optional GPS support.

htumanyan/navien
Navien water heater wire protocol for communication with NaviLink and other attached devices


It measures 80 × 36 mm and has 2 copper layers, 1.6 mm thick.
11 parts, built around the WEMOS D1 MINI. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the electricant/ESP8266_NTP_clock repository on GitHub, at the commit this page was made from: the board is PCB/WiFi_LCD_clock.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Unlicense licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).