4 layers96 × 80 mm
6 layers102.4 × 46.1 mm
CableAdapterBoard
ejangelico/CableAdapterBoardFor CRYO ASIC interface board to sub-d 50 ASIC board
- Size
- 102.4 × 46.1 mm
- Copper layers
- 6
- Thickness
- 1.7 mm
- Parts
- 20
- Nets
- 50
- Pads
- 195
- Tracks, vias
- 421, 45
- Pours
- 11
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 28 Aug 2023
- Updated
- 1 Aug 2025
Overview
CableAdapterBoard is an open-source printed circuit board by ejangelico, from the ejangelico/CableAdapterBoard repository on GitHub. It is a 6-layer board of 102.4 × 46.1 mm with 20 parts on 50 nets, routed with 421 tracks and 45 vias.
It is built around the IPL1-104-01-L-D-K and IPL1-105-01-L-D-K. Its parts include 5 connectors and 4 resistors.
Main components
2Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 0 (NL) | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4 |
| 4 | TestPoint_2Pole | TestPoint:TestPoint_2Pads_Pitch5.08mm_Drill1.3mm | TP1, TP2, TP3, TP4 |
| 2 | 1888174-6 | Tiles:TE_1888174-6 | J21, J31 |
| 1 | 5747193-2 | Connector_Dsub:SKT-50 | DSUB1 |
| 1 | IPL1-104-01-L-D-K | Connector_Samtec:SAMTEC_IPL1-104-01-L-D-K | J1 |
| 1 | IPL1-105-01-L-D-K | Connector_Samtec:SAMTEC_IPL1-105-01-X-D-K | J2 |
| 1 | IPL1-105-01-X-D-K | Connector_Samtec:SAMTEC_IPL1-105-01-X-D-K | J3 |
| 1 | Jumper_3_Open | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP1 |
| 1 | LOGO | logos:nexo-logo-small | G*** |
The 16 most common of 20 parts.
Questions
How big is the CableAdapterBoard PCB?
It measures 102.4 × 46.1 mm and has 6 copper layers, 1.7 mm thick.
What parts does the CableAdapterBoard use?
20 parts, built around the IPL1-104-01-L-D-K and IPL1-105-01-L-D-K. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CableAdapterBoard KiCad files?
From the ejangelico/CableAdapterBoard repository on GitHub, at the commit this page was made from: the board is CableAdapterBoard.kicad_pcb and its schematic CableAdapterBoard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the CableAdapterBoard design in my own project?
Its repository states no licence, so its author keeps all rights: ask ejangelico before reusing the design.
Similar boards
- 6 layers60 × 135.8 mm
- 6 layers6 × 10.5 mm
- 6 layers80 × 100 mm
- 6 layers75 × 34 mm
- 6 layers36.6 × 13.9 mm
- 6 layers15.2 × 10.8 mm
Memory Board
esl-epfl/X-MODs
Modular hardware platform based on the RISC-V X-HEEP family architecture developed at ESL, targeting ultra-low-power consumption and miniaturization, facilitating the creation of wearable devices for clinical trials
19 parts3 - 6 layers
