
Wall filter v0 5
eieeeeeee/compact-ac-parallel-filter
Pre-prototype open hardware project for a compact 100 V AC parallel filter. Experimental and not yet mains-tested.

Pre-prototype open hardware project for a compact 100 V AC parallel filter. Experimental and not yet mains-tested.
Compact ac parallel filter is an open-source printed circuit board by eieeeeeee, from the eieeeeeee/compact-ac-parallel-filter repository on GitHub. It is a 2-layer board of 32 × 28 mm with 10 parts on 6 nets, routed with 21 tracks and 0 vias.
It is built around the R533N410050P0K and TMOV14RP140E. Its parts include 4 resistors, 2 diodes, 1 capacitor, 1 connector and 1 fuse.
This directory contains two editable PCB studies. They are kept as separate revisions because their board size and implementation choices differ.
| Revision | KiCad | Board | Purpose | Status |
|---|---|---|---|---|
| Rev.A | 9 | 32 × 28 mm | compact mechanical study | pre-prototype |
| review-v0.5 | 10 | 50 × 35 mm | spacing and optional DNP branch study | official DRC: 0 violations |
Neither revision has been manufactured or tested on mains.
compact-ac-parallel-filter.kicad_pro — projectcompact-ac-parallel-filter.kicad_sch — schematiccompact-ac-parallel-filter.kicad_pcb — exact 32 × 28 mm PCB outlineACP.kicad_sym — local symbolsACP.pretty/ — project-local footprintsPLACEMENT.csv — placement coordinatesPRE-PROTOTYPE / NOT YET TESTED ON MAINS.
These files are for design review before fabrication. No physical-fit, mains, thermal, surge, EMC, PSE, or third-party safety validation has been completed.
At 32 × 28 mm the large-part courtyards are deliberately packed to the mechanical limit. If final creepage, clearance, enclosure or tolerance review fails, increase the PCB size rather than reducing safety margin.
J1 is not a Japanese/Type-A plug-blade footprint. It is a provisional electrical interface to a separately mechanically retained plug assembly. Plug insertion/removal force must not be carried only by the PCB pads.
AC L -- F1 --+-- C1 1uF X2 --+-- N
| |
+-- MOV1 --------+
| |
+-- R1 -- R2 ----+
| |
+-- R4 -- R5 -- LED1 --+
| |
+--D1--+ reverse clamp
|
NC2 and optional RC damping are intentionally not implemented on the 32 × 28 mm Rev.A PCB. The 50 × 35 mm review-v0.5 board provides DNP footprints for measurement-driven comparison.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 220k | ACP:R_1206 | R1, R2 |
| 2 | 47k | ACP:R_1206 | R4, R5 |
| 1 | 1N4148W reverse clamp | ACP:D_SOD123 | D1 |
| 1 | 37402500000 | ACP:TR5_374_5.08mm | F1 |
| 1 | Blue LED | ACP:LED_1206 | LED1 |
| 1 | PROVISIONAL PLUG INTERFACE | ACP:AC_Input_Pads_10mm | J1 |
| 1 | R533N410050P0K | ACP:R53_1uF_22.5mm | C1 |
| 1 | TMOV14RP140E | ACP:TMOV14_7.5mm | MOV1 |

eieeeeeee/compact-ac-parallel-filter
Pre-prototype open hardware project for a compact 100 V AC parallel filter. Experimental and not yet mains-tested.

gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch


OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
It measures 32 × 28 mm and has 2 copper layers, 1.6 mm thick.
10 parts, built around the R533N410050P0K and TMOV14RP140E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the eieeeeeee/compact-ac-parallel-filter repository on GitHub, at the commit this page was made from: the board is hardware/kicad/compact-ac-parallel-filter.kicad_pcb and its schematic hardware/kicad/compact-ac-parallel-filter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask eieeeeeee before reusing the design.