Skip to the content
2 layers50 × 35 mmWall filter v0 5, the printed circuit board in 3D

Pre-prototype open hardware project for a compact 100 V AC parallel filter. Experimental and not yet mains-tested.

Size
50 × 35 mm
Copper layers
2
Thickness
1.6 mm
Parts
12
Nets
7
Pads
26
Tracks, vias
23, 0
Routed
Yes
KiCad
KiCad 8 (file 20240108)
Created
19 Sep 2026
Updated
28 Oct 2026

Overview

Wall filter v0 5 is an open-source printed circuit board by eieeeeeee, from the eieeeeeee/compact-ac-parallel-filter repository on GitHub. It is a 2-layer board of 50 × 35 mm with 12 parts on 7 nets, routed with 23 tracks and 0 vias.

It is built around the R533N410050P0K and TMOV14RP140E. Its parts include 5 resistors, 2 capacitors, 2 diodes, 1 connector and 1 fuse.

Main components

2

README

hardware/kicad/README.md

KiCad hardware

This directory contains two editable PCB studies. They are kept as separate revisions because their board size and implementation choices differ.

Revision index

RevisionKiCadBoardPurposeStatus
Rev.A932 × 28 mmcompact mechanical studypre-prototype
review-v0.51050 × 35 mmspacing and optional DNP branch studyofficial DRC: 0 violations

Neither revision has been manufactured or tested on mains.

Rev.A files in this directory

  • compact-ac-parallel-filter.kicad_pro — project
  • compact-ac-parallel-filter.kicad_sch — schematic
  • compact-ac-parallel-filter.kicad_pcb — exact 32 × 28 mm PCB outline
  • ACP.kicad_sym — local symbols
  • ACP.pretty/ — project-local footprints
  • PLACEMENT.csv — placement coordinates

Status

PRE-PROTOTYPE / NOT YET TESTED ON MAINS.

These files are for design review before fabrication. No physical-fit, mains, thermal, surge, EMC, PSE, or third-party safety validation has been completed.

Rev.A mechanical basis

  • PCB: 32.0 × 28.0 mm
  • nominal PCB thickness: 1.6 mm
  • C1: 22.5 mm lead pitch, 26.5 × 10 mm top-view body envelope
  • MOV1: 7.5 mm nominal lead spacing; the footprint reserves a 17 mm maximum body envelope
  • F1: 5.08 mm pitch, 8.5 mm diameter envelope
  • large THT parts are on the front; low-power resistor/LED/diode parts are on the back

At 32 × 28 mm the large-part courtyards are deliberately packed to the mechanical limit. If final creepage, clearance, enclosure or tolerance review fails, increase the PCB size rather than reducing safety margin.

J1 limitation

J1 is not a Japanese/Type-A plug-blade footprint. It is a provisional electrical interface to a separately mechanically retained plug assembly. Plug insertion/removal force must not be carried only by the PCB pads.

Before ordering

  1. Choose one reviewed hardware revision; do not mix files from different revisions.
  2. Apply the final mains creepage/clearance rules for the actual regulatory environment.
  3. Verify enclosure and component maximum dimensions against manufacturer drawings.
  4. Verify every resistor's working/pulse voltage, power and flame behavior.
  5. Verify the final LED and diode part numbers.
  6. Replace J1 with the final plug/enclosure mechanical interface.
  7. Review fuse/MOV coordination and abnormal-condition behavior.
  8. Run ERC/DRC again with the exact ordered components and manufacturing rules.

Rev.A topology

text
AC L -- F1 --+-- C1 1uF X2 --+-- N
             |                |
             +-- MOV1 --------+
             |                |
             +-- R1 -- R2 ----+
             |                |
             +-- R4 -- R5 -- LED1 --+
                              |      |
                              +--D1--+  reverse clamp
                                     |
                                     N

C2 and optional RC damping are intentionally not implemented on the 32 × 28 mm Rev.A PCB. The 50 × 35 mm review-v0.5 board provides DNP footprints for measurement-driven comparison.

Parts

12
QtyValueFootprintReferences
10.1uF_X2_DNPWallFilter_Custom:C2_X2_P22_5_DNPC2
11N4007WallFilter_Custom:D1_DIODE_P5_0D1
1220kWallFilter_Custom:R2_PR01_VERTICAL_P10R2
1220kWallFilter_Custom:R1_PR01_VERTICAL_P10R1
137402500000WallFilter_Custom:F1_TR5_P5_08F1
147kWallFilter_Custom:R5_PR01_VERTICAL_P10R5
147kWallFilter_Custom:R4_PR01_VERTICAL_P10R4
1BLUE_LOW_CURRENTWallFilter_Custom:LED1_LED_D3_P5_0LED1
1DNPWallFilter_Custom:R3_C3_RC_DAMPER_DNP_BACKR3/C3
1PM2314_PLUG_LEADSWallFilter_Custom:J1_WIRE_INPUT_2PJ1
1R533N410050P0KWallFilter_Custom:C1_R53_1uF_X2_P22_5C1
1TMOV14RP140EWallFilter_Custom:MOV1_TMOV14_P7_5MOV1

More from eieeeeeee/compact-ac-parallel-filter

1
  • 2 layers32 × 28 mmCompact ac parallel filter, the printed circuit board in 3D

    Compact ac parallel filter

    eieeeeeee/compact-ac-parallel-filter

    Pre-prototype open hardware project for a compact 100 V AC parallel filter. Experimental and not yet mains-tested.

    10 parts

Similar boards

  • 2 layersNrf bga, the printed circuit board in 3D

    Nrf bga

    github-linguist/linguist

    Language Savant. If your repository's language is being reported incorrectly, send us a pull request!

    12 parts14kMIT
  • 2 layers66.9 × 74.5 mmDeskHop, the printed circuit board in 3D

    DeskHop

    hrvach/deskhop

    Fast Desktop Switching Device

    12 parts7.9kGPL-3.0
  • 2 layers40 × 15 mmSensors, the printed circuit board in 3D

    Sensors

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    12 parts3kApache-2.0
  • 2 layers42.7 × 56.5 mmTle6240 driver, the printed circuit board in 3D

    Tle6240 driver

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    12 parts1.2k
  • 2 layers49 × 25 mm5v boost regulator, the printed circuit board in 3D

    5v boost regulator

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    12 parts915
  • 2 layers28.3 × 10.3 mmTap Photosensor PCB, the printed circuit board in 3D

    Tap Photosensor PCB

    VoronDesign/Voron-Tap

    Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:

    12 parts716GPL-3.0
  • 2 layers25.4 × 70.4 mmTpmsniffer, the printed circuit board in 3D

    Tpmsniffer

    stacksmashing/pico-tpmsniffer

    A simple, very experimental TPM sniffer for LPC bus

    12 parts696

Questions

How big is the Wall filter v0 5 PCB?

It measures 50 × 35 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Wall filter v0 5 use?

12 parts, built around the R533N410050P0K and TMOV14RP140E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Wall filter v0 5 KiCad files?

From the eieeeeeee/compact-ac-parallel-filter repository on GitHub, at the commit this page was made from: the board is hardware/kicad/review-v0.5/wall_filter_v0_5.kicad_pcb and its schematic hardware/kicad/compact-ac-parallel-filter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Wall filter v0 5 design in my own project?

Its repository states no licence, so its author keeps all rights: ask eieeeeeee before reusing the design.