

Common Slot v1
Code
- Size
- 82.3 × 40.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 60
- Nets
- 21
- Pads
- 160
- Tracks, vias
- 206, 11
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 9 Dec 2011
- Updated
- 24 Aug 2026
Overview
Common Slot v1 is an open-source printed circuit board by Ehryk, from the Ehryk/ehryk.github.com repository on GitHub. It is a 2-layer board of 82.3 × 40.9 mm with 60 parts on 21 nets, routed with 206 tracks and 11 vias.
It is built around the L7805 and LTV-817. Its parts include 46 connectors, 4 capacitors, 4 resistors, 3 diodes and 2 ICs.
Main components
2L7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsLTV-817
DIP-4-55℃~+110℃ 1 1.2V 100mV@20mA,1mA 200mW 35V 3us 4us 50% 50mA 50mA 5kV 600% 6V DC Phototransistor DIP-4 Transistor, Photovoltaic Output Optoisolators ROHSLite-OnTransistor, Photovoltaic Output Optoisolators
README
README.mdehryk.github.com
This is my github pages repo, viewable at ehryk.github.io. It also has some setup files that I sync between various computers, most notably git and bash aliases.
Github Pages (/, /js, /css, /img)
- xkcd 1288 Substitutions Bookmarklet
/linux && /git
These are the settings I sync between various computers. Update Config.bat for windows, update-config.sh for linux.
/rainmeter
Custom Rainmeter skins for GPU and CPU temps, etc.
/brian
Brian's Stuff. See more at Dr. Bird.org
Parts
60| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | +12V | Footprints:WIRE-12AWG | J12, J14, J15, J16, J20, J21, J22, J23, J28, J29, J30, J31, J36, J37, J38 |
| 15 | 0V | Footprints:WIRE-12AWG | J13, J17, J18, J19, J24, J25, J26, J27, J32, J33, J34, J35, J39, J40, J41 |
| 2 | +12V | Footprints:WIRE-16AWG | J42, J43 |
| 2 | 0V | Footprints:WIRE-16AWG | J44, J45 |
| 2 | 100µF | Capacitors_SMD:CP_Elec_6.3x5.3 | C1, C4 |
| 2 | 470Ω | Resistors_SMD:R_1206_HandSoldering | R2, R4 |
| 1 | 100nF | Capacitors_SMD:C_1206_HandSoldering | C3 |
| 1 | 100Ω | Resistors_SMD:R_1206_HandSoldering | R1 |
| 1 | 10µF | Capacitors_SMD:CP_Elec_4x5.3 | C2 |
| 1 | 12Vsb | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J6 |
| 1 | 22kΩ | Resistors_SMD:R_1206_HandSoldering | R3 |
| 1 | 32x2P Card Edge | Footprints:CommonSlot_2x32P_2.54mm | J1 |
| 1 | 5Vsb | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J5 |
| 1 | A0 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J9 |
| 1 | A1 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J10 |
| 1 | A2 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J11 |
| 1 | Active | LEDs:LED_1206_HandSoldering | D3 |
| 1 | ENi | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J3 |
| 1 | ENi | LEDs:LED_1206_HandSoldering | D1 |
| 1 | ENj | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J2 |
| 1 | ENsw | Footprints:SW_SPST_Rocker | SW1 |
| 1 | I2C | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | J8 |
| 1 | Isense | Footprints:WIRE-16AWG | J46 |
| 1 | L7805 | TO_SOT_Packages_SMD:TO-263-3_TabPin2 | U2 |
| 1 | LTV-817 | Housings_DIP:DIP-4_W8.89mm_SMDSocket_LongPads | U1 |
| 1 | Standby | LEDs:LED_1206_HandSoldering | D2 |
| 1 | Vdisplay | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J7 |
| 1 | µMolex | Footprints:Berg_FDD_Power_1x04_2.50mm | J4 |
More from Ehryk/ehryk.github.com
12- 2 layers17.8 × 30.5 mm

- 2 layers80.8 × 56.9 mm

- 4 layers44 × 64 mm

- 2 layers73.7 × 48.9 mm

- 2 layers86.3 × 42.8 mm

- 2 layers50 × 57 mm

- 2 layers68.5 × 62 mm

- 2 layers116.8 × 162.6 mm

- 2 layers21.2 × 77.6 mm

- 2 layers14.7 × 16.2 mm

- 2 layers47 × 44 mm

- 2 layers86.9 × 20.8 mm

Similar boards
- 2 layers65 × 100 mm

Second Board
MakerLabTunisia/CARVER_X5
CARVER X5 is an OpenSourceHarware 5 Axis CNC Carving Machine - by MakerLabTunisia
47 parts135CC-BY-SA-4.0 - 2 layers45.2 × 36.6 mm

KaffeeInterface v1
misteu/RPiCoffee
Modding / hacking of a coffee machine (DeLonghi ECAM 22.110.B Magnifica S) for IoT capabilities
50 parts64BSD-3-Clause - 2 layers197.3 × 121.2 mm

TeensyMaestro Main PCB
rimuadmin/TeensyMaestro-Hardware
Hardware for the TeensyMaestro
115 parts13CERN-OHL-P-2.0 - 2 layers110.5 × 90.8 mm

TeslaSMPS
devfabiosilva/TeslaSMPS
DIY: High Voltage Range Switching Mode Power Supply for Embedded and Solar systems
112 parts7Unlicense - 2 layers99.7 × 98.4 mm

Remote3
JeanRenier/Remoting-a-microBIT-X
A set of ESP32 based controllers to remote a µBIT-X transceiver over the internet
182 parts4 - 2 layers162.6 × 113 mm

Door module
fablabnbg/aussentueren
Hard- and Software for external doors of Hackerspaces
176 parts2GPL-3.0 - 2 layers50.8 × 78.7 mm

TW39-mit Powersave
rwobrecht/piTelex-contrib
Contributions (hardware, software) around piTelex
29 parts2GPL-3.0 - 2 layers49.5 × 34.5 mm

Questions
How big is the Common Slot v1 PCB?
It measures 82.3 × 40.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Common Slot v1 use?
60 parts, built around the L7805 and LTV-817. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Common Slot v1 KiCad files?
From the Ehryk/ehryk.github.com repository on GitHub, at the commit this page was made from: the board is Circuits/Common Slot PSU Card/Common Slot v1/Common Slot v1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Common Slot v1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Ehryk before reusing the design.