4 layers150 × 137.1 mm
Controller
CircuitGuy943/Sabre-Integrated-flight-controller
(🚧) A "Jack of all trades" custom flight controller board. With support for both power and control and the ability for custom firmware
282 parts2GPL-3.0
4 layers18.3 × 38.6 mm
MAX7456 Breakout
eekaba/MAX7456_BreakoutA MAX7456 clone breakout board for testing
- Size
- 18.3 × 38.6 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 20
- Pads
- 75
- Tracks, vias
- 175, 48
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 16 Aug 2024
- Updated
- 25 Aug 2024
Overview
MAX7456 Breakout is an open-source printed circuit board by eekaba, from the eekaba/MAX7456_Breakout repository on GitHub. It is a 4-layer board of 18.3 × 38.6 mm with 17 parts on 20 nets, routed with 175 tracks and 48 vias.
It is built around the MAX7456EUI. Its parts include 7 resistors, 6 capacitors, 1 IC, 1 diode and 1 connector. It belongs with the interfaces and adapters boards of this library.
Main components
1README
README.mdMAX7456_Breakout
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 0.1uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C4, C5, C6 |
| 3 | 1k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R3, R4, R5 |
| 2 | 47uF | 293D476X9010B2TE3:CAP_293D_B_VIS | C2, C3 |
| 2 | 75 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R2 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R7 |
| 1 | 27MHz | ASV_27_000MHZ_EJ_T:XTAL_ASV-27.000MHZ-EJ-T | Y1 |
| 1 | 330 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R6 |
| 1 | Conn_01x14_Socket | Connector_PinSocket_2.54mm:PinSocket_1x14_P2.54mm_Vertical | J1 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | MAX7456EUI_ | MAX7456EUI_:SOP65P637X110-28N | U1 |
Questions
How big is the MAX7456 Breakout PCB?
It measures 18.3 × 38.6 mm and has 4 copper layers, 1.6 mm thick.
What parts does the MAX7456 Breakout use?
17 parts, built around the MAX7456EUI. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MAX7456 Breakout KiCad files?
From the eekaba/MAX7456_Breakout repository on GitHub, at the commit this page was made from: the board is MAX7456_Breakout/MAX7456_Breakout.kicad_pcb and its schematic MAX7456_Breakout/MAX7456_Breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MAX7456 Breakout design in my own project?
Its repository states no licence, so its author keeps all rights: ask eekaba before reusing the design.
Similar boards
- 2 layers28 × 28 mm
- 2 layers46.9 × 46.6 mm
Fourth
Bhakti-A/Maya_V_FlightController
This is a custom flight controller PCB designed for drones.
84 parts1 - 4 layers115.5 × 90 mm
- 6 layers40 × 40 mm
20x20 fc
lmiez/yecnodF405
Open source flight controller based on the STM32F405 MCU that runs betaflight.
120 partsGPL-3.0 - 4 layers25.8 × 32.9 mm
Lora nodemcu
sudomesh/disaster-radio
A (paused) work-in-progress long-range, low-bandwidth wireless disaster recovery mesh network powered by the sun.
17 parts1.1k - 4 layers86.2 × 58.4 mm
Usbactoachub
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
17 parts915 - 4 layers39 × 45 mm
