

Simple low pass filter PCB based on Look Mum No Computer
- Size
- 30 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 34
- Nets
- 33
- Pads
- 110
- Tracks, vias
- 222, 6
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 25 Apr 2019
- Updated
- 18 May 2019
Overview
Lpf is an open-source printed circuit board by edkalrio, from the edkalrio/low-pass-filter repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 30 × 100 mm with 34 parts on 33 nets, routed with 222 tracks and 6 vias.
It is built around the LM13700M and BC558. Its parts include 16 resistors, 5 capacitors, 4 connectors, 2 ICs and 2 diodes.
Main components
2README
README.md
Parts
34| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2, R4, R5, R8, R10, R13 |
| 4 | 220 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R3, R6, R7, R9 |
| 3 | AudioJack2 | Connector_Audio:Jack_3.5mm_CUI_SJ1-3533NG_Horizontal_CircularHoles | J1_IN1, J2_CV1, J3_OUT1 |
| 2 | 100k | Potentiometer_THT:Potentiometer_Alps_RK09Y11_Single_Horizontal | RV1_RES1, RV3_CV1 |
| 2 | 100k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R15, R16 |
| 2 | 100n | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C4, C5 |
| 2 | 1n | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C1, C2 |
| 2 | BC558 | Package_TO_SOT_THT:TO-92_Inline | Q1, Q2 |
| 2 | LED | LED_THT:LED_D3.0mm_Horizontal_O1.27mm_Z2.0mm | D1, D2 |
| 1 | 1k8 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R12 |
| 1 | 4.7k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R14 |
| 1 | 4.7n | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C3 |
| 1 | 470k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R11 |
| 1 | 4k7 | Potentiometer_THT:Potentiometer_Alps_RK09Y11_Single_Horizontal | RV2_FREQ1 |
| 1 | Conn_02x05_Top_Bottom | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J1 |
| 1 | LM13700 | Package_DIP:DIP-16_W7.62mm | U2 |
| 1 | TL074 | Package_DIP:DIP-14_W7.62mm | U1 |
Similar boards
- 2 layers30 × 107.6 mm

- 2 layers62.2 × 109.2 mm

- 2 layers99.1 × 99.1 mm

- 2 layers

- 4 layers99.6 × 99.8 mm

- 2 layers335 × 218.6 mm

- 2 layers90.8 × 22.9 mm

- 2 layers239.6 × 239.9 mm

Questions
How big is the Lpf PCB?
It measures 30 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Lpf use?
34 parts, built around the LM13700M and BC558. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Lpf KiCad files?
From the edkalrio/low-pass-filter repository on GitHub, at the commit this page was made from: the board is lpf.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Lpf design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).